Thingiverse
Crokinole Disc / Button Bowl by calaverajoe
by Thingiverse
Last crawled date: 3 years ago
UPDATE 04/19/2021
-A user reports back that the BrownCastle holder fits a Tracey board fine.
Files updated 2021-Feb-16
Bowl Holder Details
Button_Bowl_Holder_MaydayKS_2020
-Board Diameter: 775mm
-Rail Thickness: 9mm
-Outside Height: 38mm
-Inside Height: 29mm
Button_Bowl_Holder_BrownCastle
-Board Diameter: 775mm
-Rail Thickness: 7mm
-Outside Height: 38mm
-Inside Height: 25mm
UPDATES:
I've now added one variant to the bowl holder (details to follow). Since there may come a time when multiple variants of the holder for different makers' boards exist, I am going to start using the two following bits of format for updates:
1) Holders will be named Button_Bowl_Holder_makername/edition
2) For all holders, I will specify dimensions for rail thickness, board diameter, outside rail height, and inside rail height. This way folks can measure their boards and find which is going to be the best fit for them. I'm assuming there is a lot of overlap in the dimensions of the rails, so if you try the holder for your board from a maker other than the one it is named with, comment so I can add that info to the Thing Details.
-Renamed the original bowl holder file to Button_Bowl_Holder_MaydayKS_2020 to specify which board it fits.
-Added Button_Bowl_Holder_BrownCastle, a variant for the bowl holder designed to fit on BrownCastle Crokinole boards
--I have NOT tested the fit of this holder as I do not have one of those boards, but Steven was helpful in providing dimensions so I could adjust the design for them. The only significant change is that the rails on the BrownCastle boards are notably thinner than the rails on the Mayday bowls.
---------------ORIGINAL INFO BELOW-----------------
Finally got my first Crokinole board (2020 Mayday Kickstarter) and of course I had to start making things for it. My son and I often play using one of our ottoman / coffee tables as the table because the height ends up working really well for him and it means we don’t block off the whole living room. Unfortunately this also means that unlike playing on a card table, we don’t have corners to put things on, like score keepers, buttons, etc.
These bowls were inspired by https://www.thingiverse.com/thing:3669730 but I wanted a little more security from the lids and the original bowls just slid around too much in the holders I designed, so I started from scratch in Fusion 360 and designed all new bowls and lids. Now they can be used for play and storage, and work both with and without the holders, as differing table situations allow.
Bowls are about 82mm / 3.25” in diameter and about 50mm / 2” tall without the lid. They hold 14 discs (this is how many of each color came with the Kickstarter) comfortably for storage. You could probably also use these for Gliss / wax powder, but I make ZERO claims to how well the lid would keep it from spilling all over it tipped / inverted.
Everything prints without supports as oriented. For the lid, 10% infill is probably fine, but you’ll want 20% or more for the holder just for strength.
The bowl model is a solid piece, and CAN be printed in vase mode / spiralize outer contour. This, however, isn’t the strongest. What I do is print them with 0% infill, 2-3 outer walls, 4 bottom layers, and 0 top layers. Basically makes it a double or triple thick vase mode print. Ends up being plenty strong for the intended use.
Something to keep in mind:
1) The holders were designed based off of my 2020 Mayday Kickstarter board, and as such, I cannot say how well these will fit other boards. Looking at the cross section diagram I’ve included, my board has the following dimensions.
Board Diameter: 775mm
Rail Thickness: 9mm
Outside Height: 38mm
Inside Height: 29mm
The channel on the holder is about 9mm wide and slightly curved to match the curve on my Mayday board. The outside leg of the holder is 28.5mm high and the inside leg is 16mm high. This lets it sit securely and leaves enough room in the ditch for discs to slide underneath.
Whether this works for YOUR board, I cannot say for certain. I’m happy to tweak the design for other boards, but I’d need all those dimensions listed above and on the cross section photo to do so.
-A user reports back that the BrownCastle holder fits a Tracey board fine.
Files updated 2021-Feb-16
Bowl Holder Details
Button_Bowl_Holder_MaydayKS_2020
-Board Diameter: 775mm
-Rail Thickness: 9mm
-Outside Height: 38mm
-Inside Height: 29mm
Button_Bowl_Holder_BrownCastle
-Board Diameter: 775mm
-Rail Thickness: 7mm
-Outside Height: 38mm
-Inside Height: 25mm
UPDATES:
I've now added one variant to the bowl holder (details to follow). Since there may come a time when multiple variants of the holder for different makers' boards exist, I am going to start using the two following bits of format for updates:
1) Holders will be named Button_Bowl_Holder_makername/edition
2) For all holders, I will specify dimensions for rail thickness, board diameter, outside rail height, and inside rail height. This way folks can measure their boards and find which is going to be the best fit for them. I'm assuming there is a lot of overlap in the dimensions of the rails, so if you try the holder for your board from a maker other than the one it is named with, comment so I can add that info to the Thing Details.
-Renamed the original bowl holder file to Button_Bowl_Holder_MaydayKS_2020 to specify which board it fits.
-Added Button_Bowl_Holder_BrownCastle, a variant for the bowl holder designed to fit on BrownCastle Crokinole boards
--I have NOT tested the fit of this holder as I do not have one of those boards, but Steven was helpful in providing dimensions so I could adjust the design for them. The only significant change is that the rails on the BrownCastle boards are notably thinner than the rails on the Mayday bowls.
---------------ORIGINAL INFO BELOW-----------------
Finally got my first Crokinole board (2020 Mayday Kickstarter) and of course I had to start making things for it. My son and I often play using one of our ottoman / coffee tables as the table because the height ends up working really well for him and it means we don’t block off the whole living room. Unfortunately this also means that unlike playing on a card table, we don’t have corners to put things on, like score keepers, buttons, etc.
These bowls were inspired by https://www.thingiverse.com/thing:3669730 but I wanted a little more security from the lids and the original bowls just slid around too much in the holders I designed, so I started from scratch in Fusion 360 and designed all new bowls and lids. Now they can be used for play and storage, and work both with and without the holders, as differing table situations allow.
Bowls are about 82mm / 3.25” in diameter and about 50mm / 2” tall without the lid. They hold 14 discs (this is how many of each color came with the Kickstarter) comfortably for storage. You could probably also use these for Gliss / wax powder, but I make ZERO claims to how well the lid would keep it from spilling all over it tipped / inverted.
Everything prints without supports as oriented. For the lid, 10% infill is probably fine, but you’ll want 20% or more for the holder just for strength.
The bowl model is a solid piece, and CAN be printed in vase mode / spiralize outer contour. This, however, isn’t the strongest. What I do is print them with 0% infill, 2-3 outer walls, 4 bottom layers, and 0 top layers. Basically makes it a double or triple thick vase mode print. Ends up being plenty strong for the intended use.
Something to keep in mind:
1) The holders were designed based off of my 2020 Mayday Kickstarter board, and as such, I cannot say how well these will fit other boards. Looking at the cross section diagram I’ve included, my board has the following dimensions.
Board Diameter: 775mm
Rail Thickness: 9mm
Outside Height: 38mm
Inside Height: 29mm
The channel on the holder is about 9mm wide and slightly curved to match the curve on my Mayday board. The outside leg of the holder is 28.5mm high and the inside leg is 16mm high. This lets it sit securely and leaves enough room in the ditch for discs to slide underneath.
Whether this works for YOUR board, I cannot say for certain. I’m happy to tweak the design for other boards, but I’d need all those dimensions listed above and on the cross section photo to do so.
Similar models
thingiverse
free
Crokinole disc buffer by jr10003
...crokinole disc buffer by jr10003
thingiverse
a holder to make buffing easy for my 30mm mayday crokinole discs.
thingiverse
free
Crokinole 20s Tube Plug - Mayday 2020 Kickstarter by calaverajoe
...hich have ~36mm inner diameter. they should work for other tubes, too, but may need scaling for whatever their inner diameter is.
thingiverse
free
Animal food bowl holder by jrdnhsnbrg
...od bowl holder by jrdnhsnbrg
thingiverse
a simple animal food bowl holder. inside diameter of 120mm, outside diameter of 128mm.
thingiverse
free
Crokinole disc tray and cover by KillroiM
...crokinole disc tray and cover by killroim
thingiverse
crokinole disc tray. same size as the original trays. fits 13 discs.
.
thingiverse
free
Crokinole Disc Holder
...rse
i didn't have anywhere to store my discs between games, so i designed this. it holds 13 discs in case you have an extra.
thingiverse
free
Customizeable box with lid
... to secure the lid and thats it.
update:
fixed error when using inside dimensions where the height was not correctley calculated.
thingiverse
free
Hive Box
...ally' lined out. so the lid fits inside the outside and inside box.
with tiles from:https://www.thingiverse.com/thing:1659194
thingiverse
free
Icing Sugar Lid by pentar25
... my girlfriend needed a lid for. if you need i can change the words or tweak the dimensions slightly. should fit on most shakers.
thingiverse
free
Pot/ pan lid holder by cybernuth
...id diameters).
can be attached to the inside or outside of cabinets for place saving pot lid storage. maximum lid thickness 15mm.
thingiverse
free
Parametric Canister by mrbug
...e effectively. there is now a groove on the inside of the lid at the top that is the same width as the container's thickness.
Calaverajoe
thingiverse
free
Crokinole 20s Tube Plug - Mayday 2020 Kickstarter by calaverajoe
...hich have ~36mm inner diameter. they should work for other tubes, too, but may need scaling for whatever their inner diameter is.
thingiverse
free
Ender 3 Pro Power Supply fan silencer with logo
...the "ender 3 pro power supply meanwell baffler" by calaverajoe scale this to 10% of the original size to...
thingiverse
free
Keyforge Key Token - Multipart by calaverajoe
... would print 6 sets total - three to attach, three to play with.
i would love feedback and to see how this looks when printed up.
thingiverse
free
Ender CR10V3 and 5 Pro Tool Holder by Z3DInnovations
...ender 3 pro tool holder - a remix by calaverajoe print upside down tip of cutter hook touching plate!!!...
thingiverse
free
Olson Mask template for Prusa Mini by Adowoowoo
...of the sewing pattern for olson masks. instructions: user calaverajoe noted that scaling to 108% seems to work for...
thingiverse
free
Ender 3 Pro Tool Holder - Remix by neyth_makes
...tool holder - remix by neyth_makes thingiverse remix of calaverajoe#39;s toolholder. this version now securely slides into the rails...
Crokinole
thingiverse
free
Crokinole Disc by RealEmmettS
...lly!
made as the "traditional size" discs specified by crokinole canadahttps://crokinole.ca/collections/crokinole-discs
thingiverse
free
Crokinole Wall Mount
...crokinole wall mount
thingiverse
i needed a way to hang my new crokinole board on the wall.
thingiverse
free
Crokinole disc buffer by jr10003
...crokinole disc buffer by jr10003
thingiverse
a holder to make buffing easy for my 30mm mayday crokinole discs.
thingiverse
free
Crokinole disc tray and cover by KillroiM
...crokinole disc tray and cover by killroim
thingiverse
crokinole disc tray. same size as the original trays. fits 13 discs.
.
thingiverse
free
Crokinole Counter 20 by Suko4780
...crokinole counter 20 by suko4780
thingiverse
holder to count the discs going in the middle
thingiverse
free
Crokinole Button Box
...se you lose one). fits standard/tournament sized, 1-1/4" (32 mm) buttons. smaller buttons will also fit but be more sloppy.
thingiverse
free
Crokinole Disc Holder
...rse
i didn't have anywhere to store my discs between games, so i designed this. it holds 13 discs in case you have an extra.
thingiverse
free
Crokinole tube storage cap by Oriundo
...w so that it is not too tight.
the tube storage can be printed from the original file :https://www.thingiverse.com/thing:4180730
thingiverse
free
Crokinole Button Storage Tube
... both 12 piece and 13 piece versions because some retailers ship an extra button of each colour in case one gets damaged or lost.
thingiverse
free
Crokinole Disks by onebitpixel
....5 mmhttp://www.crokinole.com/faq.asp
this thing was made with tinkercad.
edit it online https://tinkercad.com/things/9mp13mqiasn
Disc
archibase_planet
free
Discs
...discs
archibase planet
compact discs cd compact disk
discs - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$7
SS with Disc Bonbon with disc
...ee 3d model ss with disc bonbon with disc for download as max on turbosquid: 3d models for games, architecture, videos. (1285181)
3d_export
$20
Car discs
...car discs
3dexport
car discs
3d_export
$5
disc knob
...disc knob
3dexport
disc knob
3d_export
$5
disc knob
...disc knob
3dexport
disc knob
3d_ocean
$2
Compact Disc
...compact disc
3docean
album audio cd compact disc dvd laser disc movie music
a cd
turbosquid
$30
Protrusion and slipped disc herniated disc
...usion and slipped disc (herniated disc) for download as blend on turbosquid: 3d models for games, architecture, videos. (1572177)
turbosquid
free
disc
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
Realistic Floppy Disc
...op storage usb
this is a model of a floppy disc. floppy discs were used as computer storage devices before the invention of usbs.
3d_export
$10
brake-disc-brembo
...brake-disc-brembo
3dexport
brake-disc-brembo
Bowl
3d_export
$10
pet bowl dog bowl cat bowl
...pet bowl dog bowl cat bowl
3dexport
pet bowl dog bowl cat bowl
3d_ocean
$2
Bowl
...bowl
3docean
ceramic bowl
archibase_planet
free
Bowl
...bowl
archibase planet
bowl jug pitcher
bowl - 3d model for interior 3d visualization.
archibase_planet
free
Bowl
...bowl
archibase planet
bowl
bowl - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$2
bowl
...bowl
3docean
white bowl by 3dmax
design_connected
$16
Bowl
...bowl
designconnected
bowl computer generated 3d model.
3d_export
$5
bowl
...bowl
3dexport
bowl make of ceramic with a print of leaves
3d_export
free
bowl
...bowl
3dexport
bowl<br>here you are
turbosquid
$5
Bowling Ball + Bowling Pins
...free 3d model bowling ball + bowling pins for download as fbx on turbosquid: 3d models for games, architecture, videos. (1357551)
3d_ocean
$2
Bowl
... is modelled in vrayforc4d. cinema 4d contains vray material for use. rendered and checked. available formats; cinema 4d vray,obj
Button
archibase_planet
free
Buttons
...buttons
archibase planet
lift elevator call buttons
elevator call buttons - 3d model for interior 3d visualization.
3ddd
$1
Button
... button , john reeves
набор мебели button от дизайнера john reeves
3d_export
$5
Button
...button
3dexport
smd button<br>verts 2.180<br>faces 3.848
turbosquid
$4
Button
...
turbosquid
royalty free 3d model button for download as fbx on turbosquid: 3d models for games, architecture, videos. (1297941)
turbosquid
$1
Button
...
turbosquid
royalty free 3d model button for download as fbx on turbosquid: 3d models for games, architecture, videos. (1392935)
turbosquid
$9
buttons
...id
royalty free 3d model buttons for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1404875)
turbosquid
$6
button
...uid
royalty free 3d model button for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669204)
turbosquid
$5
Button
...uid
royalty free 3d model button for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1710868)
turbosquid
$3
Button
...quid
royalty free 3d model button for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1510524)
turbosquid
$3
Button
...quid
royalty free 3d model button for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1509961)