Thingiverse
Creality LD-002R AnyCubic Wash and Cure Adapter by goldentuna1200
by Thingiverse
Last crawled date: 5 years, 7 months ago
This is an adapter for the Creality LD-002R Resin Printer to be used on the AnyCubic Wash and Cure machine.
Printing it base/flat side down so you don't need any supports for the 'direct' adapters. On these direct adapters .. you can use a M3 x 16mm screw to 'lock' them onto the straight adapter.
You will need a M6 x 20mm Hex head bolt for the locking nut screw on the adjustable slide adapter.
Printing it base/flat side down so you don't need any supports for the 'direct' adapters. On these direct adapters .. you can use a M3 x 16mm screw to 'lock' them onto the straight adapter.
You will need a M6 x 20mm Hex head bolt for the locking nut screw on the adjustable slide adapter.