Creality Ender-4 Upgrade to BTT TFT35 v3.0 Touch Screen Display

Last crawled date: 5 years, 5 months ago

Upgrade to BigTreeTech (BTT) TFT35 v3.0 touch screen display compatible with 12864 LCD module with 30* display holders are the same as described in https://www.thingiverse.com/thing:3465370 and in https://www.thingiverse.com/thing:3549320 .
The beauty of this 3.5" TFT is that it could work as a graphic display connected to COM port with a touch screen, as well as emulate a conventional 12864 LCD display at a posh of a button.
More about BTT TFT35 display and firmware @: https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0
So, this is a simple and minimalistic front panel print with no support. Will fit any 20x20 frame.
Changes in the Marlin:
comment an old 2004 Controller (dash symbol is removed):
// define REPRAP_DISCOUNT_SMART_CONTROLLER
define 12864 Graphic Controller:
define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
Overall budget: ~$27 USD for the module:
BoQ:
1 x BTT TFT35 V3.0 Touch Screen Display module: http://got.by/3x2p80
1 x Display Front Panel: print face down, no support
2 x Bottom Holder, 1 x Top Corner Holder - refer to my post @ Thingiverse: https://www.thingiverse.com/thing:3465370
Enjoy!
UPDATE: Reset button may be soldered to the TFT module with a tiny shift (as in my module). So, it would not fit a dedicated whole perfectly.