Thingiverse
Creality CR10S Marlin 1.1.8 Firmware by Tacblades
by Thingiverse
Last crawled date: 4 years, 5 months ago
This is a build of Marlin 1.1.8
!!! NOTE This is for the CR-10S ONLY !!!
(not for the CR10)
Unlocking all the features of Marlin like mesh bed leveling without the need for a probe.
This is designed for the Stock CR-10S with original hotend.
YOU DO LOOSE POWER OUT RESUME (As this is Creality proprietary Firmware)
So if that is important to you then DO NOT flash the firmware.
Here is the Link http://bit.ly/2IvE0Zd
It includes all the files your need, the stock original CR-10S firmware to roll back if needed,
but you loose the power out resume feature.
READ the README file it will really help you.
!!!! Changing the firmware is your responsibility and I take no liability for what happens.
!!!! There is no Support for this if you have problems, its all up to you.
!!!! There is a potential to Brick your control box in this process e.g. if there is a power out when uploading.
This build has been tested on many machines and users.
It is suggested to upload and flash using a fully charged laptop to minimise power out issues.
These are the features that have been included.
Percentage complete Fixed
Added a few changes for e3d Clone settings optional
General tidy up for the code and multiple distributions
Added M114 additional detailed position information
Added SD File name sorting
Doubleclick for baby stepping
Software controlled PWM for the cooling fan
All updated Marlin 1.1.8 libraries
Some Filament change and pause behaviour fixed
Added README file to prevent common firmware errors
PID Autotune from menu for nozzle
Scrolling Long Filenames
Relaxed the Bed Temp monitoring period for stability at high temp
Complete Quick Access Custom Menu Section
Move Up and Away (first stop print other menu option)
Heat bed
Manual purge filament from nozzle
Printer information screen
Safe Park Head on Pause
Status Message Scrolling
Individual Axis Homing
Updated Custom Bootscreen
Fast Bed Heating
PID Calibrated for generic hardware
Manual Mesh Bed Levelling 25 point (put a M420 S1 & M29 in start code)
Filament Out Sensor
Adjust all setting and save to eeprom from the control box
Adjust eSteps
Optimised Acceleration and Jerk
Baby Stepping
Live fine control Z Adjustments 0.015mm
Accurate controller response
Smoother stepper control compared to stock.
Min temp extrude safety stop
Lock Z axis on Pause
Good Luck.
!!! NOTE This is for the CR-10S ONLY !!!
(not for the CR10)
Unlocking all the features of Marlin like mesh bed leveling without the need for a probe.
This is designed for the Stock CR-10S with original hotend.
YOU DO LOOSE POWER OUT RESUME (As this is Creality proprietary Firmware)
So if that is important to you then DO NOT flash the firmware.
Here is the Link http://bit.ly/2IvE0Zd
It includes all the files your need, the stock original CR-10S firmware to roll back if needed,
but you loose the power out resume feature.
READ the README file it will really help you.
!!!! Changing the firmware is your responsibility and I take no liability for what happens.
!!!! There is no Support for this if you have problems, its all up to you.
!!!! There is a potential to Brick your control box in this process e.g. if there is a power out when uploading.
This build has been tested on many machines and users.
It is suggested to upload and flash using a fully charged laptop to minimise power out issues.
These are the features that have been included.
Percentage complete Fixed
Added a few changes for e3d Clone settings optional
General tidy up for the code and multiple distributions
Added M114 additional detailed position information
Added SD File name sorting
Doubleclick for baby stepping
Software controlled PWM for the cooling fan
All updated Marlin 1.1.8 libraries
Some Filament change and pause behaviour fixed
Added README file to prevent common firmware errors
PID Autotune from menu for nozzle
Scrolling Long Filenames
Relaxed the Bed Temp monitoring period for stability at high temp
Complete Quick Access Custom Menu Section
Move Up and Away (first stop print other menu option)
Heat bed
Manual purge filament from nozzle
Printer information screen
Safe Park Head on Pause
Status Message Scrolling
Individual Axis Homing
Updated Custom Bootscreen
Fast Bed Heating
PID Calibrated for generic hardware
Manual Mesh Bed Levelling 25 point (put a M420 S1 & M29 in start code)
Filament Out Sensor
Adjust all setting and save to eeprom from the control box
Adjust eSteps
Optimised Acceleration and Jerk
Baby Stepping
Live fine control Z Adjustments 0.015mm
Accurate controller response
Smoother stepper control compared to stock.
Min temp extrude safety stop
Lock Z axis on Pause
Good Luck.