Thingiverse
Creality CR-10 V2 Cable Clip by vivamus3d
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is not really a remix of the cable holder, (which looks exactly like the stock clip delivered by Creality with the CR-10 V2), but a new design. I wanted to cover the V-slots of the frame (at least the upward facing ones, which collected a lot of dust, etc.), but the standard clip blocked both slots.
Therefore I designed an alternative which is mounted on the side, but keeps the bed-heating-cable above the frame as well. I personally use the one with the 6mm hole, but dependent on your cable you might want it a bit looser or tighter.
Together with the corner slide the cable moves swiftly as needed - no more danging.
Therefore I designed an alternative which is mounted on the side, but keeps the bed-heating-cable above the frame as well. I personally use the one with the 6mm hole, but dependent on your cable you might want it a bit looser or tighter.
Together with the corner slide the cable moves swiftly as needed - no more danging.