Thingiverse
![Creality 4040, Verstärkung/Reinforcement Inlay (Ender3-Pro...) by Pointer_de](/previews/8019924.jpg)
Creality 4040, Verstärkung/Reinforcement Inlay (Ender3-Pro...) by Pointer_de
by Thingiverse
Last crawled date: 3 years, 5 months ago
Als ich meinen normalen Ender3 auf die 4040-Bettführung vom Ender3Pro umrüsten wollte, ist mir bei der Montage aufgefallen, dass man mit den vier Zylinderschrauben das Profil beim Festschrauben stark verformt. Dafür habe ich dann einen kleinen Klotz mit passenden Löchern erstellt. Diesen kann man in das 4040-Profil schieben und somit die Schrauben wieder gut festziehen.
Ähnlich für die Verschraubung der Z-Profile auf den Grundrahmen, dort allerdings ohne Löcher um es einfacher drucken zu können. Einfach mit einem 5mm Bohrer durchbohren.
As I wanted to convert my normal Ender3 to the 4040 bed guide from the Ender3-Pro, I noticed during assembly that the profile could severely deformed when tighten the four screws. For this I created a small block with matching holes. This can be pushed into the 4040 profile and thus tightened the screws again.
Similar for Z-profiles onto the base frame, but without holes to make it easier to print. Simply drill through with a 5mm drill after inserting it.
Ähnlich für die Verschraubung der Z-Profile auf den Grundrahmen, dort allerdings ohne Löcher um es einfacher drucken zu können. Einfach mit einem 5mm Bohrer durchbohren.
As I wanted to convert my normal Ender3 to the 4040 bed guide from the Ender3-Pro, I noticed during assembly that the profile could severely deformed when tighten the four screws. For this I created a small block with matching holes. This can be pushed into the 4040 profile and thus tightened the screws again.
Similar for Z-profiles onto the base frame, but without holes to make it easier to print. Simply drill through with a 5mm drill after inserting it.
Similar models
thingiverse
free
![Schalterdosen Anzeichnungshilfe by Telebob](/t/8022368.jpg)
Schalterdosen Anzeichnungshilfe by Telebob
...dornen einfach in die bestehende dose mittig anbringen und wieder den mittelpunkt der neuen dose einfach auf die wand übertragen.
thingiverse
free
![Filament Verbinder by Beebix](/t/8751836.jpg)
Filament Verbinder by Beebix
...nd das loch auf 1,75mm aufbebohrt dann mit ratsche und nuss in die halter gedreht. paar mal üben dann geht das gut. viel spaß ;-)
thingiverse
free
![Familien Sparclub, Spardose by Schneeking](/t/8121686.jpg)
Familien Sparclub, Spardose by Schneeking
...h meine sachen gefallen würde ich mich sehr über eine kleine spende freuen. klickt auf den linkhttps://www.paypal.me/fadekofolien
thingiverse
free
![Haubenverschluss Introduction F5J Höllein by mbrak](/t/8902787.jpg)
Haubenverschluss Introduction F5J Höllein by mbrak
...en. zum einfachen abnehmen der haube sind seitlich 2 mulden eingearbeitet, die sich sehr gut mit den fingernägeln greifen lassen.
3dwarehouse
free
![Ein KLEINES einfach so haus](/t/9338414.jpg)
Ein KLEINES einfach so haus
...b ich einfach mal so ausem kopf gemacht (achten sie doch mal auf den fernser und die tür die im fernser raum ist auf die details)
thingiverse
free
![Druckraum Luftfilterkasten für PKW Innenraumfilter by Digga79](/t/8045781.jpg)
Druckraum Luftfilterkasten für PKW Innenraumfilter by Digga79
...stellt kann man ihn komplett ohne stützstruktur drucken. (hat zumindest mit meinem drucker und meinen einstellungen funktioniert)
thingiverse
free
![FLSUN i3 Motormount auf Z - Achse by Majoda](/t/8286479.jpg)
FLSUN i3 Motormount auf Z - Achse by Majoda
...i mir hat sich der wulst beim hochfahren der z achse wesenlich verbessert.
viel spaß beim drucken und bei der nutzung.
lg. majoda
thingiverse
free
![Sidewinder X1 Messuhrhalter by AFUDirk](/t/8246571.jpg)
Sidewinder X1 Messuhrhalter by AFUDirk
...zu gefaehrlich war, wenn der extruder
nach links faehrt, habe ich eine version gemacht, die auf den bauteilluefter gesteckt wird.
thingiverse
free
![Ender 3 Pro Profile-Cover by k2op](/t/8178537.jpg)
Ender 3 Pro Profile-Cover by k2op
...sstes logo.
die freecad original datei enthält eine tabelle mit variablen für durchmesser der zylinder und länge der kreuzbalken.
thingiverse
free
![LED-Mount for OEM-Fang Creality CR-10 by NightmareX2](/t/8592175.jpg)
LED-Mount for OEM-Fang Creality CR-10 by NightmareX2
...en.
ich habe 5050 led´s verwendet die super hell sind.
dadurch das man die led´s nicht sieht blendet es nicht.
viel spaß damit ;)
Verstärkung
thingiverse
free
![Karosserie Verstärkung E5 HX by P3T2I](/t/9679194.jpg)
Karosserie Verstärkung E5 HX by P3T2I
...karosserie verstärkung e5 hx by p3t2i
thingiverse
make it!
thingiverse
free
![Zewahalter mit verstärkung by MarioStyl3r](/t/8692497.jpg)
Zewahalter mit verstärkung by MarioStyl3r
...be noch schrägen angebracht, damit es etwas stabiler wird.
viel spaß damit und gerne nehme ich "tip the designer" an :)
thingiverse
free
![CTC Z-Achsen Verstärkung by aruba68](/t/8742537.jpg)
CTC Z-Achsen Verstärkung by aruba68
...as ausgleichsstück ist 0,5mm hoch, kann aber bei bedarf im slicer auch höher skaliert werden.
die plastikabstandhalter entfallen.
thingiverse
free
![Anet A8 X Z Axis backside CROSS reinforcement verstärkung frame by Saschi841987](/t/8586809.jpg)
Anet A8 X Z Axis backside CROSS reinforcement verstärkung frame by Saschi841987
...87
thingiverse
1 m m8 gewindestange
12 x m8 mutter
12 x m8 unterlegscheibe
printing quali. cross 0,2
printing quali. holder 0,15
thingiverse
free
![Duschwand Verstärkung Weinsberg Caracompact Wohnmobil by MichHK](/t/8498789.jpg)
Duschwand Verstärkung Weinsberg Caracompact Wohnmobil by MichHK
...ngen beschädigt wurden. dazu wird die dieses auf die scheibe geklemmt und mit den beiden oberen gelösten schrauben mit befestigt.
thingiverse
free
![Tronxy_X1_X_Y by hoeni](/t/8572183.jpg)
Tronxy_X1_X_Y by hoeni
...tronxy_x1_x_y by hoeni thingiverse verstärkung für die x und y_achse des tronxy x1, es...
thingiverse
free
![Wagenheber / car jack release by StiviKing](/t/8264828.jpg)
Wagenheber / car jack release by StiviKing
...by stiviking thingiverse wagenheberventil öffner/schliesser car jack release zur verstärkung einen 3mm stift aus stahl etc. in die bohrung...
thingiverse
free
![Y-Motorhalter für CTC 2020 Aluminiumumbau by utnelson](/t/8783157.jpg)
Y-Motorhalter für CTC 2020 Aluminiumumbau by utnelson
...welche zum tisch zeigen linsenkopf nehmen, da ich eine verstärkung durch alu-arme am bett verbaut habe. an die löcher...
thingiverse
free
![HelloBeePrusa Y-Axis Frame Stabilizator by Swaty](/t/8763924.jpg)
HelloBeePrusa Y-Axis Frame Stabilizator by Swaty
...problem with the stock printer. https://www.youtube.com/watch?v=qv7a9idf7pq hardware: 1x "y-achse verstärkungquot; (2 printed parts) 2x 350mm m10 threaded rod 1x...
4040
3d_export
$12
![bridge with handrails](/t/11888696.jpg)
bridge with handrails
...bridge with handrails 3dexport object's dimensions are 1000 × 4040 ×1210 mm<br>this model is a low-poly and opens with...
3d_export
$10
![footbridge](/t/11887911.jpg)
footbridge
...footbridge 3dexport object's dimensions are 1000 × 4040 × 1200mm<br>this model is a low-poly and opens with...
3d_export
$6
![bridge without handrails](/t/11888281.jpg)
bridge without handrails
...bridge without handrails 3dexport object's dimensions are 1000×4040400mm<br>this model is a low-poly and opens with no older...
3d_export
$8
![bridge with one handrail](/t/11888217.jpg)
bridge with one handrail
...with one handrail 3dexport object's dimensions are 1000 x 4040 x 1200mm<br>this model is a low-poly and opens with...
3d_export
$16
![Tablet battery pen](/t/13063485.jpg)
Tablet battery pen
...spec/gloss textures<br>- blend (cycles): metal/roughnes textures<br>geometry:<br>- units: centimeters<br>- polygons: 4040lt;br>- vertex: 4200<br>- triangles: 0<br>- quads: 4040<br>- ngons: 0<br>- vertex...
3d_export
$5
![cabinet](/t/11929365.jpg)
cabinet
...in blender 2.82, cycles renderer used.<br>- vertices: 4356;<br>- faces: 4040<br>- triangles: 8196;<br>- unit system: metric;<br>- units: meters;<br>- dimensions: 0.4m...
3d_export
$139
![new year scene](/t/11420560.jpg)
new year scene
...69 mm x 328 mm armchair polygons 4040 verts 4040 1051 mm x 926 mm x 1243 mm garland...
3dfindit
free
![20-4040, 20-4040-Black](/t/9230012.jpg)
20-4040, 20-4040-Black
...20-4040, 20-4040-black
3dfind.it
catalog: 80/20
3dfindit
free
![40-4040, 40-4040-Black](/t/9229974.jpg)
40-4040, 40-4040-Black
...40-4040, 40-4040-black
3dfind.it
catalog: 80/20
thingiverse
free
![4040 by eplacek](/t/9252085.jpg)
4040 by eplacek
...4040 by eplacek
thingiverse
Ender3
3d_export
free
![ender 3 3d print bed clips](/t/11930065.jpg)
ender 3 3d print bed clips
...ender 3 3d print bed clips 3dexport ender3 3d print, print bed clips, glass bed clips, i...
3d_export
free
![danish lunch](/t/11491073.jpg)
danish lunch
...with 3d printer made in thindercad and printed on ender3 max,<br>i used petg filament and have painted with vajjejo...
thingiverse
free
![Ender3 pro](/t/4711532.jpg)
Ender3 pro
...ender3 pro
thingiverse
a plastic cover for the ender3 pro power supply, 100% fit.
note: fits only on the ender3 pro.
thingiverse
free
![Guide filament ENDER3](/t/4713062.jpg)
Guide filament ENDER3
...guide filament ender3
thingiverse
guide filament pour ender3
thingiverse
free
![Ender3 Display Knob](/t/4971624.jpg)
Ender3 Display Knob
...ender3 display knob
thingiverse
rotary encoder knob for ender3
thingiverse
free
![Poignée ender3](/t/4713717.jpg)
Poignée ender3
...poignée ender3
thingiverse
bon print
thingiverse
free
![Support Buses Ender3 / Nozzles holder Ender3](/t/4884396.jpg)
Support Buses Ender3 / Nozzles holder Ender3
...support buses ender3 / nozzles holder ender3
thingiverse
un support de buses directement sur votre ender 3
thingiverse
free
![Scrapper holder for Ender3 by clem3109](/t/8206656.jpg)
Scrapper holder for Ender3 by clem3109
...scrapper holder for ender3 by clem3109
thingiverse
scrapper holder for ender3
thingiverse
free
![ender3 filament guide by robotic_arm](/t/8250075.jpg)
ender3 filament guide by robotic_arm
...ender3 filament guide by robotic_arm
thingiverse
ender3 filament guide
thingiverse
free
![Ender3, Ender3 pro reel holder with ballracer by nesan](/t/9239034.jpg)
Ender3, Ender3 pro reel holder with ballracer by nesan
...ender3, ender3 pro reel holder with ballracer by nesan
thingiverse
ender 3 ball racers need raft support on bed plate only.
Inlay
design_connected
$13
![Inlay](/t/4569221.jpg)
Inlay
...inlay
designconnected
porro inlay computer generated 3d model. designed by front.
turbosquid
$25
![Inlay Glass](/t/13415967.jpg)
Inlay Glass
...bosquid
royalty free 3d model inlay glass for download as max on turbosquid: 3d models for games, architecture, videos. (696784)
turbosquid
$15
![Inlay-sofa](/t/13512524.jpg)
Inlay-sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
![HUDSON INLAY BENCH](/t/13373649.jpg)
HUDSON INLAY BENCH
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$30
![Inlay Coffee Table 3D Model](/t/134230.jpg)
Inlay Coffee Table 3D Model
... model
3dexport
inlay coffee table antique card pattern greek key obj max 3ds
inlay coffee table 3d model bustermk2 6964 3dexport
cg_studio
$30
![Inlay Coffee Table3d model](/t/630426.jpg)
Inlay Coffee Table3d model
...3d model
cgstudio
.3ds .max .obj - inlay coffee table 3d model, royalty free license available, instant download after purchase.
turbosquid
$12
![Floors Inlay Pack 1](/t/13242164.jpg)
Floors Inlay Pack 1
...royalty free 3d model floors inlay pack 1 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1288519)
turbosquid
$12
![Bone Inlay Blue Console](/t/13373490.jpg)
Bone Inlay Blue Console
...del bone inlay blue console for download as max, max, and obj on turbosquid: 3d models for games, architecture, videos. (1636647)
turbosquid
$56
![book 2 (inlayed cover).3ds](/t/13402826.jpg)
book 2 (inlayed cover).3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
![Bedside Table Bone Inlay Pearl](/t/13513401.jpg)
Bedside Table Bone Inlay Pearl
... bone inlay pearl for download as max, c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1649079)
Pointer
turbosquid
$5
![Pointer](/t/13342515.jpg)
Pointer
...id
royalty free 3d model pointer for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1710955)
3d_export
$5
![Pointer](/t/11380182.jpg)
Pointer
...pointer
3dexport
made in blender
turbosquid
$40
![Pointers](/t/13288735.jpg)
Pointers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Pointer](/t/13392018.jpg)
Pointer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
![Wood pointer](/t/13521135.jpg)
Wood pointer
...squid
royalty free 3d model wood pointer for download as max on turbosquid: 3d models for games, architecture, videos. (1527779)
3d_export
free
![Laser pointer](/t/11932289.jpg)
Laser pointer
...laser pointer
3dexport
turbosquid
$15
![Mouse Pointer](/t/13308917.jpg)
Mouse Pointer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
![Pointer classik](/t/13392017.jpg)
Pointer classik
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
![pointer sell](/t/13313090.jpg)
pointer sell
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$16
![Travel Direction Pointers](/t/13458241.jpg)
Travel Direction Pointers
...travel direction pointers for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1167965)
Creality
turbosquid
$7
![filament roller single print creality](/t/13283018.jpg)
filament roller single print creality
...del filament roller single print creality for download as stl on turbosquid: 3d models for games, architecture, videos. (1619309)
3d_export
free
![Creality ender enclosure webcam mount](/t/11377764.jpg)
Creality ender enclosure webcam mount
...e creality enclosure. sure is better than a tripod. change it up if it helps. i printed pla with 50% infill on my dd ender 3 pro.
3d_export
free
![ender 3 frame cavity covers](/t/11930067.jpg)
ender 3 frame cavity covers
...3 inserts,<br>made these inserts for the framework of the creality ender 3 - makes it look a bit more...
3d_export
$42
![excavator](/t/11419973.jpg)
excavator
...width is the original size. 0.12 mm printing surface creality ender-5...
3d_export
free
![ender 3 3d print bed clips](/t/11930065.jpg)
ender 3 3d print bed clips
...glass bed + normal aluminium bed frame of the creality ender 3 = 6mm (b) these clips are designed...
3d_export
free
![ender 3 enclosure corners](/t/11929984.jpg)
ender 3 enclosure corners
...that i could build my enclosure frame for my creality ender 3 - so i printed them in a...
thingiverse
free
![Toolbox Creality](/t/4892399.jpg)
Toolbox Creality
...ingiverse
this is a toolbox for tools that comes with creality printers, with a guide to cut capricorn ptfe with a cutter blade.
thingiverse
free
![Creality Hotend Plate](/t/4703229.jpg)
Creality Hotend Plate
... from creality themselves as the ender 3 is open source. this means i did not create this design and all credit goes to creality.
thingiverse
free
![Creality Cat by alexander125](/t/8365496.jpg)
Creality Cat by alexander125
...creality cat by alexander125
thingiverse
this is the cat that comes on the sd card for all creality 3d printers.
thingiverse
free
![Creality Dog by alexander125](/t/8365515.jpg)
Creality Dog by alexander125
...creality dog by alexander125
thingiverse
this is the dog that comes on the sd card for all creality 3d printers.
Reinforcement
3d_export
$6
![reinforced slabs](/t/11715585.jpg)
reinforced slabs
...reinforced slabs
3dexport
3d model created by blender 2.90 render eevee.
turbosquid
$17
![Reinforced Wooden Crate](/t/13370998.jpg)
Reinforced Wooden Crate
... 3d model reinforced wooden crate for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1263805)
3d_ocean
$6
![Construction Site Reinforcement](/t/578331.jpg)
Construction Site Reinforcement
...uctions. this is a low polygonal model, easy to animate. - poly count: 778 - formats: max /obj /fbx/3ds/dxf - high detail was ...
3d_export
free
![tmt reinforced steel bar](/t/11464381.jpg)
tmt reinforced steel bar
...orced steel bar
3dexport
tmt reinforced steel bar https://sketchfab.com/3d-models/tmt-bar--anil-5e940bd6b61d46aeb22346f1886d0597
3d_export
$15
![Reinforced concrete foundation 3D Model](/t/127915.jpg)
Reinforced concrete foundation 3D Model
...reinforced concrete foundation 3d model
3dexport
reinforced concrete foundation 3d model bu1266 74497 3dexport
turbosquid
$750
![THE ES1d2O HOUSE (reinforced concrete)](/t/13270382.jpg)
THE ES1d2O HOUSE (reinforced concrete)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
![Retro Gaming - Reinforced Door](/t/13269873.jpg)
Retro Gaming - Reinforced Door
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$4
![Wire Reinforced Glass](/t/566851.jpg)
Wire Reinforced Glass
...ing is seamless, as you can see in the preview. the largest images are 2048×2048 pixels. also included are 1024, 512 and 256 p...
turbosquid
$10
![Fibre-reinforced plastic rebar factory](/t/13421767.jpg)
Fibre-reinforced plastic rebar factory
... plastic rebar factory for download as mat, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1297054)
turbosquid
$13
![Medieval Noble's Reinforced Door (8k)](/t/13353097.jpg)
Medieval Noble's Reinforced Door (8k)
...reinforced door (8k) for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1473809)
Pro
turbosquid
$29
![Pro](/t/13281543.jpg)
Pro
...ree 3d model mac pro for download as obj, c4d, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1505782)
turbosquid
$15
![Apple Mac Pro and Pro Display](/t/13514094.jpg)
Apple Mac Pro and Pro Display
...ee 3d model apple mac pro and pro display for download as max on turbosquid: 3d models for games, architecture, videos. (1417078)
3d_export
$5
![iphone 13 pro max and pro](/t/11423898.jpg)
iphone 13 pro max and pro
...3 pro max and 13 pro the model is made in four colors (graphite, gold, silver, and blue), all of which are attached in the files.
3d_export
free
![sapphire pro](/t/11460960.jpg)
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
3d_export
$4
![macbook pro](/t/11457376.jpg)
macbook pro
...macbook pro
3dexport
macbook pro 13" inch 2020 years model
3ddd
free
![GentleLase Pro](/t/625827.jpg)
GentleLase Pro
... syneron , candela
gentlelase pro аппарат для лазерной эпиляции
turbosquid
$25
![PRO frame](/t/13336060.jpg)
PRO frame
...rbosquid
royalty free 3d model pro frame for download as max on turbosquid: 3d models for games, architecture, videos. (1148329)
turbosquid
$5
![Alien pro](/t/13246623.jpg)
Alien pro
...osquid
royalty free 3d model alien pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1678446)
turbosquid
$5
![iphone11 pro](/t/13284263.jpg)
iphone11 pro
...uid
royalty free 3d model iphone11 pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1562707)
3ddd
$1
![Mac Pro (appel)](/t/624168.jpg)
Mac Pro (appel)
...mac pro (appel)
3ddd
компьютер , apple
mac pro