Crazy Pony AIO FPV Mount by Sekot 3d model
3dmdb logo
Thingiverse
Crazy Pony AIO FPV Mount by Sekot

Crazy Pony AIO FPV Mount by Sekot

by Thingiverse
Last crawled date: 4 years, 9 months ago
Designed this to fit my (off brand) crazy pony AIO FPV camera.
The small dot connectors are inserted through the outer tray and into the inner tray to allow for some basic up and down rotation. The base then sits inside the inner tray (you will need to glue, foam tape, or something else to secure it as friction won't be enough long term). Then one wall (the smaller one) slides into the back (make sure you route the cable through the gap in the wall) and the larger wall with the big gap goes up front to help clamp down on the camera.
To attach it to something you can use zip ties around the larger tray, you can use foam tape for a soft mount, or anything else that will work for you.
I have printed this and am using on a RC Car at the moment and I will get some pictures of it up if I can.

Tags