Thingiverse
CraftBot feet [Flex material] by Marrrs
by Thingiverse
Last crawled date: 3 years, 1 month ago
A couple of feet broke on my CraftBot so I designed a replacement a while ago. I gave it a higher profile to allow more sideways movement. My CraftBot runs more silent now when less vibrations are transferred to the table.
Print in flexible material and keep shells over 1,2 mm for a durable print. Remove the old feet and insert these in the same holes. I redesigned the part that goes into the hole so it would be easier to insert. I have not printed the published version because the first test print came out good enough for me to use.
Print in flexible material and keep shells over 1,2 mm for a durable print. Remove the old feet and insert these in the same holes. I redesigned the part that goes into the hole so it would be easier to insert. I have not printed the published version because the first test print came out good enough for me to use.
Similar models
thingiverse
free
Original PS4 Vertical Stand by akmalznal
...insert my silicone feet to it. i have designed a simple feet that should fit. the feet should be printed in tpu with 100% infill.
thingiverse
free
Gonk GNK Power Droid Sectioned by Masterkookus
...nging the feet so that it has holes as well allowing for a customized peg insert there as well.
hope it prints well for everyone.
thingiverse
free
CraftBot hole cover by palasiks
... is my take on the idea of kezat: http://www.thingiverse.com/thing:1161001.
the top side with the ledge should be inserted first.
thingiverse
free
CR-10 V2 feet by 3DprinteringStuff
... i can't print that material, but i put a hole down the middle so i could screw in the original rubber feet from my cr-10 v2.
thingiverse
free
Larger Feet for Ikea Alex by nevon
...ld one printed better, but the hole was a minute faster uses slightly less material and ikea's has a hole in it. your choice.
thingiverse
free
Flexible filament guide for CraftUnique Craftbot Plus by Smily1357
...se.com/thing:717962, so it fits on the craftbot plus.
i had to use a 2mm drill to clean the hole for the filament to fit through.
thingiverse
free
playseat challenge foot raiser by dacoon
...he foot is only, to not damage my room floor, maybe i will redesign it, so that i can adjust the hight with the angel of the rod.
thingiverse
free
Microwave foot by mohissa1987
...will be easy to remove the support material. but i couldnt remove it after printing. nonetheless, it snapped in with no problems.
thingiverse
free
API Lunchbox Insert by mxcaratachea
... 360 to model my own. i chamfered the screw holes so i printed it with those facing up, as seen in one of the pictures attached.
thingiverse
free
piano bench feet by bripulliam
...ench can fit into. add some hot glue to the bottom as you put the legs in to keep them on tight. or drill a hole and add a screw.
Marrrs
thingiverse
free
CraftBot filament guide by Marrrs
...craftbot filament guide by marrrs
thingiverse
cheers, frank.
thingiverse
free
Snowflake bowl by Marrrs
...snowflake bowl by marrrs
thingiverse
a candy bowl for christmas. it looks nicer live than the uploaded image.
thingiverse
free
Turboanka by Marrrs
...rd reich already at the horizon. when discovery channel gets hold of these blueprints, get ready for yet another wwii miniseries.
thingiverse
free
Holiday Christmas Deer STL by Marrrs
...christmas deer stl by marrrs
thingiverse
just exported as stl in netfabb basic. all cred goes to yeg3d for this beautiful model.
thingiverse
free
Ultrabook stand by Marrrs
...r my dell xps 13, so i can watch soa in bed without getting hit in the forehead by the top edge of the screen when i fall asleep.
thingiverse
free
Letter opener with steel blade by Marrrs
...steel blade by marrrs
thingiverse
a printable letter opener where you insert a piece of a 10 mm snap-off blade during the print.
thingiverse
free
Lime Cat cosplay helmet by Marrrs
...rd cat-size helmet resembling the lime cat meme. just print and add cat.
edit: now there is a smoother hi-res version available.
thingiverse
free
CraftUnique logo coaster (unofficial) by Marrrs
...raftbot) logo. i printed it with two colours pla. gold brown with white on top for that christmasy, gingerbready feeling. cheers!
thingiverse
free
Sliding bag clip redone by Marrrs
...rizontal printing. the squareish profile is now diagonally oriented and also stretched a bit higher, so no supports are required.
thingiverse
free
CraftBot spool holder DeLuxe by Marrrs
...one on each side of your craftbot. this idea was inspired by voidward's spool holder: http://www.thingiverse.com/thing:541173
Craftbot
thingiverse
free
Craftbot Truck
...f warranty, it's not a
problem if the cybertruck release is a bit delayed.https://craftbot.com/craftbot-plus-new-and-upgraded
thingiverse
free
Fan Duct Craftbot + by sepp974
...fan duct craftbot + by sepp974
thingiverse
this fan duct is for craftbot+ fans that are different than the original craftbot.
thingiverse
free
Dustfilter for Craftbot by JimmiFriborg
...filter for craftbot to simply mount on the craftbot's chassis.
still need some improvements, but it's getting there ;-)
thingiverse
free
Purge Bucket for Craftbot printer by Belezeebub
...purge bucket for craftbot printer by belezeebub
thingiverse
super fast purge bucket for craftbot flow or craftbot 3 printer
thingiverse
free
Shock Absorber Craftbot by zeblate
...shock absorber craftbot by zeblate
thingiverse
and now my version of the shock absorber for my (and your) craftbot.
thingiverse
free
Fan Duct for CraftBot + by sepp974
...uct for craftbot plus (fan mount is different from one of craftbot).
this fan duct is better than the other i've designed yet
thingiverse
free
CraftBot filament roller by gdlzsilip
...ment roller by gdlzsilip
thingiverse
two small bearing for the original craftbot filamaent console, helping the smooth scroll...
thingiverse
free
CraftBot Fan Cover by Tomi_3D
...inter?sa=0&sp=0http://craftunique.com/item/craftbot
sliced by:http://www.craftunique.com/craftware
the layer height is 0.3mm.
thingiverse
free
Craftbot attachment by VicViperTPS
...craftbot attachment by vicvipertps
thingiverse
for use in larger projects.
thingiverse
free
Dampers for Craftbot by fkopac
...g dampers on stepper motors and putting it on flexible legs. here are two simple designs, you will be surprised by the results :)
Flex
3ddd
$1
Flex
...flex
3ddd
flex , конференц-зал
кресло для переговоров
3ddd
$1
Flex — I Laccati
... i laccati
3ddd
flex , дверь
двери межкомнатные, окрашенные. flex, коллекция «i laccati»
3ddd
free
Flex Seating 6032
... конференц-зал , flex
кресло модульное, модель flex seating 6032
3ddd
free
TechnoGym Flex Posterior
... flex , тренажер
3ds max 2012 (v-ray) + fbx
technogym flex posterior
3ddd
$1
Банкетка Flex Team
... , flex team
http://www.abitant.com/products/banketka-flex-team-2014-kilt-pouf
3ddd
free
FLEX , I Laccati
...cati
3ddd
flex , i laccati
flex , i laccati
модель p 14 q stucco fiorentino decoro gigli
3ddd
$1
Metal lux / FLEX
...metal lux / flex
3ddd
metal lux
люстра metal lux flex.
turbosquid
$11
Stool Flex
...ty free 3d model stool flex for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1673813)
3ddd
$1
Flex by Skandiform
...flex by skandiform
3ddd
skandiform , стул
enjoy
turbosquid
$7
Flex Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Feet
3d_export
$30
Legs and feet High feet 3D Model
...t high feet 3d model
3dexport
feet shoes sandal barefoot leg women
legs and feet high feet 3d model adrianaamerina 96817 3dexport
3ddd
$1
DUCK FEET LAMP
...duck feet lamp
3ddd
утка
duck feet lamp
turbosquid
$19
Feets 01
...3d model feets 01 for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1624047)
turbosquid
$2
Robo3D Feet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Hands and Feet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Feet study
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Female Feet 01
...oyalty free 3d model feet 01 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1446069)
turbosquid
$19
The feet of Hercules trainer
... feet of hercules trainer for download as , stl, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1684923)
turbosquid
$79
Hand and Feet (Rigged)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Viabizzuno Big Feet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Material
3d_export
$245
top of the material
...top of the material
3dexport
top of the material,commercial ceiling ceiling material, metal material
3d_ocean
$5
Concrete material
...concrete material
3docean
concrete cover material realistic textures
realistic concrete material
3d_ocean
$3
Grass Material
...grass material
3docean
grass material
include normal map
3d_ocean
$3
Terrain material
...terrain material
3docean
terrain material include normal map
3d_ocean
$3
Wood Material
...wood material
3docean
wood material include normal map
vizpark
$10
Material Manager
...ager
vizpark
the vp material manager is a new innovative tool to manage materials within 3ds max® in ways never possible before.
vizpark
free
Material Manager
...ager
vizpark
the vp material manager is a new innovative tool to manage materials within 3ds max® in ways never possible before.
3d_ocean
$7
R16 Material Kit(50+ Materials!)
...ls -fabrics -automotive materials -architectural materials -a complimentary studio -abstract materials -rocks all for the pric...
3d_ocean
$5
Frozen Materials
...erials the project includes the frozen materials and frosted effect. for the material included diffuse and map normal. thank you!
design_connected
$16
Material Pendant
...material pendant
designconnected
new works material pendant computer generated 3d model. designed by noergaard & kechayas.