CR10(s) Enclosure by Wilko007

Last crawled date: 3 years ago

Enclosure for the CR10(S), but every printer which fits in this size can obviously be placed in the enclosure. Remark for the CR10(S). The maximum height to print is 32cm, due to the width of the enclosure and the raising x axes. If you want to print higher, do one of two things: Remove the top of the enclosure or make the enclosure 3 CM wider. In my case it is too late, because the enclosure is already built.
The enclosure consists of 2 parts. The bottom where the printer stands on and the top.
Main reason for creating two parts, is that the top can be removed for maintenance or placing the printer.
The Sketchup file contains also the parts which you can print yourself. The stands are made of wood, The floor, sides and top of MDF 12mm thick.
For the sizes, see the sketchup file.
In a few days I'll be uploading the remaining STL files for the 3D printable parts.
As window and door I used polycarbonate 3mm thick.
2 times 520 x 520 mm for the sides € 25
1 time 408 x 495 for the door € 10
Polycarbonate is realy transparant and can withstand a lot of heat.
Bill of material fro the printable parts.
Sorry that some parts are in Dutch, but by looking at the shape and under which topic it is located, you should be able to handle it.
Door
1 x CR10 enclosure doorhandle 0.2.stl
Hinge from: https://www.thingiverse.com/thing:1933479:
2 x counter_sunk_right_hand.stl
2 x hinge_back_plate.stl
2 x pan_head_right_hand.stl
1 x Hoek met inkeping 3mm voor magneet met ronde hoeken.stl
1 x Schroef verdikking voor magneet aan deur enclosure.stl
2 x Hoek met inkeping 3mm ronde hoeken.stl
Top
1 x CR10 enclosure binnendop.stl
1 x CR10 enclosure binnendop met pulley houder part 1 vs 1.2.stl
1 x CR10 enclosure binnendop met pulley houder part 2 vs 1.2.stl
6 x CR10 enclosure buitendop dicht.stl
Stands to ensure that the top may not move
2 x CR10 enclosure binnenste beugel voor achterste staanders.stl
1 x CR10 enclosure binnenste beugel voor voorste staander links.stl
1 x CR10 enclosure binnenste beugel voor voorste staander rechts.stl
Polycarbonate side
2 x CR10 enclosure haak voor polycarbonaat plaat.stl
2 x CR10 enclosure polycarbonaat bodem klem.stl
Bottom inside
10 x Haak 90 graden 12x12mm voor spaanplaatschroef met verzonken kop 3mm.stl
4 x Hoek 90 bij 90 graden 25x25 voor spaanplaatschroef met verzonken kop 3mm.stl
Top inside
14 x Haak 90 graden 12x12mm voor spaanplaatschroef met verzonken kop 3mm.stl
4 x Hoek 90 bij 90 graden 25x25 voor spaanplaatschroef met verzonken kop 3mm.stl
2 x Hoek 90 bij 90 graden 25x25 extra lang voor spaanplaatschroef met verzonken kop 3mm zonder afgeronde hoeken.stl
LED strip
5 x LED strip beugel.stl
1 x LED strip beugel maar aan 1 kant vast.stl
Filament pully at the left back of the inside of the enclosure
1 x Houder voor filament pully part 1.stl
1 x Houder voor filament pully part 2.stl
1 x U wiel 26mm vs 1.1.stl
Extension cables for the electronic box.
They can be made yourself or buy an extension kit on ebay.
Extended the RaspberryPi with a power switch and LED: https://www.thingiverse.com/thing:3399288 this enables a graceful shutdown and additional doesn't power the CR10S control unit via the USB cable anymore when in a "shutdown - h" state.