CR10 pancake conversion therapy

Last crawled date: 4 years, 2 months ago

Honestly, there isn't really much to this and it's exactly what you think it is, a printer that prints pancakes.
just don't forget to flip your bed so you can use the other side, and use butter or Crisco so you can take them off once they're done.
here's the ending g code scrip I used:
G91 ; make coordinates relative
G1 Z2 F5000 ; move Z another 2mm up
G90 ; use absolute positioning for the XYZ axes
G1 X150 F3600 ; moving center
G1 Y150 F3600 ; moving center
G1 Z30 F3600 ; move up
M104 S0 ; turn off extruder
M107 ; turn off part cooling fan
M84 ; disable motors
M140 S110 ; start heating the bed to 110 degrees Celsius
\
and for the speed of the extruder motor I used:
26 mm filament diameter with a 1500mm/min printing speed and a 5 mm nozzle
these are important settings so make sure you have them
as for parts:
https://www.amazon.com/Iverntech-Stepper-Integrated-Printers-Machine/dp/B0776F4BKH/ref=sr_1_4?crid=1OVC59RKBKNV5&keywords=stepper+motor+with+lead+screw&qid=1579414334&sprefix=stepper+motor+with+%2Caps%2C204&sr=8-4
https://www.amazon.com/uxcell-Rings-Nitrile-Rubber-Diameter/dp/B07GJQRVG4/ref=sr_1_3?keywords=60mm+o+ring&qid=1579414374&sr=8-3
and 3 mm screws and nuts