Thingiverse
![CR-6 SE Power Supply Cover 92x92x14 fan by artworkvideo](/previews/8084897.jpg)
CR-6 SE Power Supply Cover 92x92x14 fan by artworkvideo
by Thingiverse
Last crawled date: 3 years, 5 months ago
My remix for installing a much quieter fan in the Creality CR-6 SE power supply.
credit to Thingiverse 2967389.
adds only 15mm to original power supply dimensions...23mm total with mountings
holes will need some enlargement (3mm drill?)
designed for Noctua NF-A9x14 PWM fan...
fan wiring: black=ground, yellow=+12v, blue and green not needed
will need to hack original fan connector to new fan wiring...
new fan is 12v, same as original
requires printer standoffs for proper clearance...I used Thingiverse 4504419 (or 4655004)
(UPDATE): I took a second look at the "Low-Noise Adaptor" included with the Noctua fan. As suspected, it's just an inline resistor(about 50 ohms) on the +12v yellow wire. It's supposed to reduce max RPM's from 2200 to 1700. Since the whole point of using this cover is to reduce fan noise, I extracted and installed the resistor into my fan wire harness. I verified that my fan was running before I reassembled my CR6.
Result: I can still hear the p/s fan kick in, but it's even quieter now, and it still cycles on and off, indicating it's doing the job.
NOTE: while I'm sure there is adequate air flow at 1700 RPM for open air use, I might not want to do this resistor mod to a printer that is inside a crazy hot enclosure!
credit to Thingiverse 2967389.
adds only 15mm to original power supply dimensions...23mm total with mountings
holes will need some enlargement (3mm drill?)
designed for Noctua NF-A9x14 PWM fan...
fan wiring: black=ground, yellow=+12v, blue and green not needed
will need to hack original fan connector to new fan wiring...
new fan is 12v, same as original
requires printer standoffs for proper clearance...I used Thingiverse 4504419 (or 4655004)
(UPDATE): I took a second look at the "Low-Noise Adaptor" included with the Noctua fan. As suspected, it's just an inline resistor(about 50 ohms) on the +12v yellow wire. It's supposed to reduce max RPM's from 2200 to 1700. Since the whole point of using this cover is to reduce fan noise, I extracted and installed the resistor into my fan wire harness. I verified that my fan was running before I reassembled my CR6.
Result: I can still hear the p/s fan kick in, but it's even quieter now, and it still cycles on and off, indicating it's doing the job.
NOTE: while I'm sure there is adequate air flow at 1700 RPM for open air use, I might not want to do this resistor mod to a printer that is inside a crazy hot enclosure!
Similar models
thingiverse
free
![Fan adapter for power supply for cr-10 by mastersystem](/t/8530767.jpg)
Fan adapter for power supply for cr-10 by mastersystem
...ng out a portion of the fan.
the part to be printed makes it possible to fix the fan despite a square cut of the size of the fan.
thingiverse
free
![CR6-SE Power Supply Noctua NF-A6x25 Fan Adapter by pro_info](/t/8048860.jpg)
CR6-SE Power Supply Noctua NF-A6x25 Fan Adapter by pro_info
... top of the power supply.
since the original fan is 12v, choose the 12v version of the noctua, so you won't need a step-down.
thingiverse
free
![Sapphire pro PSU / Power Supply Cover Noctua 92x14 by Pjock](/t/8069914.jpg)
Sapphire pro PSU / Power Supply Cover Noctua 92x14 by Pjock
...r as power supplies 24v and fan is 12, my run at around 10v and totally silent.
wires on fan
black = ground (-)
yellow = 12 v (+)
thingiverse
free
![new power supply cover_bluer_plus by avmim](/t/8013965.jpg)
new power supply cover_bluer_plus by avmim
...r the quieter noctua nf-a6x25 flx fan. when installing this fan, be careful with the polarity of the connector supplying the fan.
thingiverse
free
![CR-6 SE PSU Additional Covers by FingersKFF](/t/8074084.jpg)
CR-6 SE PSU Additional Covers by FingersKFF
...gether without overlapping and i've reduced the supports so that they should print quicker but still provide enough rigidity.
thingiverse
free
![Ender 3 Pro Power Supply Cover with Fan Port Silent Mod](/t/4932627.jpg)
Ender 3 Pro Power Supply Cover with Fan Port Silent Mod
...he fan is imperceptible.
it's very basic, but it works.
the ender 3 pro has 12v fan ports, so no buck converter is necessary.
thingiverse
free
![CR-6 SE Power Supply Cover Upgrade by pclapp19](/t/8354101.jpg)
CR-6 SE Power Supply Cover Upgrade by pclapp19
...e.
the fan opening now matches the size of the fan.
improved out flow opening and over the screw terminals
print with the tabs up
thingiverse
free
![Ender 5 Plus Case Cover for Noctua 92mm Fans by _lb3d](/t/8497443.jpg)
Ender 5 Plus Case Cover for Noctua 92mm Fans by _lb3d
...tters that the fans come with, through a buck converter providing 12v from the power supply, meaning that the fans are always on.
thingiverse
free
![Remix of Baroudeur's I3 Mega Quiet power supply cover by LeeG123](/t/8579959.jpg)
Remix of Baroudeur's I3 Mega Quiet power supply cover by LeeG123
...ipped the yellow wire (rpm, not needed) and had to make a 2 pin dupont connector to plug the fan in, red wire to + and black to -
thingiverse
free
![CR10 v2 standalone upgrade v.1 by themakerunit](/t/8355452.jpg)
CR10 v2 standalone upgrade v.1 by themakerunit
...fan (12v)
meanwell 12v 72w power supply (mainly to power fans for now)
video of my actual setup here:https://youtu.be/dgsnzdobw9i
92X92X14
thingiverse
free
![Netzteil Cover Anycubic Mega X by ChrisHolgerson](/t/8034687.jpg)
Netzteil Cover Anycubic Mega X by ChrisHolgerson
...it is designed for a noctua nf-a9x14 pwm fan (92x92x14 fits for lrs-350-12 power supply. the original screws can...
thingiverse
free
![Netzteil Gehäuse für Anycubic Mega X by Jurhen](/t/8494632.jpg)
Netzteil Gehäuse für Anycubic Mega X by Jurhen
...anycubic mega x das gehäuse ist für den lüfter 92x92x14 von noctua altes ausbauen den 2pin stecker vom alten...
thingiverse
free
![CR-6 SE PSU Additional Covers by FingersKFF](/t/8074084.jpg)
CR-6 SE PSU Additional Covers by FingersKFF
...left when using artworkvideo's cr-6 se power supply cover 92x92x14 fan: https://www.thingiverse.com/thing:4657025 like sanger_a2 i wasn't content leaving the...
Artworkvideo
thingiverse
free
![CR-6 SE Cable Support remixed by artworkvideo](/t/8235479.jpg)
CR-6 SE Cable Support remixed by artworkvideo
... off.
i use these mods as well:
thingiverse 4682557....ptfe tube support
thingiverse 4698688...x-axis cover/bracket...first rate!
thingiverse
free
![CR6-SE Motherboard Fan Kit-remix by artworkvideo](/t/10251160.jpg)
CR6-SE Motherboard Fan Kit-remix by artworkvideo
...blocker blacksilentfan xr2 60x60x25mm (12v)
note: the fan case has two sides with slightly larger side tabs..for better gluing.
thingiverse
free
![CR-6 SE ptfe_tube_fix ....remix by artworkvideo](/t/8053027.jpg)
CR-6 SE ptfe_tube_fix ....remix by artworkvideo
...left side to increase access to the mounting screw.
you will need 2 m3*10 screws...disconnect ptfe tube from extruder to install
thingiverse
free
![CR-6 SE X-Limit Switch Cover for cable w/logo by artworkvideo](/t/9682303.jpg)
CR-6 SE X-Limit Switch Cover for cable w/logo by artworkvideo
...bject on the bed in your slicer 45 degrees will result in vertical (or horizontal) print layer lines...which i think look better.
thingiverse
free
![CR-6 SE LED Cover Assy. by artworkvideo](/t/8231582.jpg)
CR-6 SE LED Cover Assy. by artworkvideo
...mm-female-single-connector/dp/b01izwbhjc/ref=dp_prsubs_1?pd_rd_i=b01izwbhjc&psc=1
https://www.youtube.com/watch?v=j3oyzqo5oig
thingiverse
free
![CR-6 SE PSU Additional Covers by FingersKFF](/t/8074084.jpg)
CR-6 SE PSU Additional Covers by FingersKFF
...used to fill in the gaps left when using artworkvideo#39;s cr-6 se power supply cover 92x92x14 fan: https://www.thingiverse.com/thing:4657025 like...
Cr
turbosquid
$15
![Creazioni CR-673 CR-4461](/t/13255301.jpg)
Creazioni CR-673 CR-4461
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![Ravak CR 055.00](/t/659917.jpg)
Ravak CR 055.00
...ravak cr 055.00
3ddd
ravak , смеситель
ravak cr 055.00
turbosquid
$100
![CR-002](/t/13382710.jpg)
CR-002
...
turbosquid
royalty free 3d model cr-002 for download as stl on turbosquid: 3d models for games, architecture, videos. (1686037)
3ddd
$1
![Ravak CR 012.00](/t/631315.jpg)
Ravak CR 012.00
...ravak cr 012.00
3ddd
ravak , смеситель
смеситель ravak cr 012.00
3ddd
free
![Консоль CR Currin](/t/736818.jpg)
Консоль CR Currin
...ь , cr currin
консоль cr currin
ширина - 1675 мм
глубина - 510 мм
общая высота - 810 мм
3ddd
$1
![CR 39444](/t/994438.jpg)
CR 39444
...0
диаметр: 100
тип патрона: gu5,3 gu10
количество ламп: 1
мощность: 35w
цвет: золото хрусталь
материал: металл хрусталь exclusive
3d_ocean
$89
![Honda CR-Z](/t/561284.jpg)
Honda CR-Z
...www.youtube.com/watch?v=rrbb4d4lypk ` he honda cr-z‘s exterior styling is formed around a “one-motion wedge” concept with a lo...
3ddd
$1
![Creazoni / STEFY CR-8901](/t/972594.jpg)
Creazoni / STEFY CR-8901
...creazoni / stefy cr-8901
3ddd
creazoni
creazioni stefy cr-8901
turbosquid
$60
![Chain-CR-001](/t/13382711.jpg)
Chain-CR-001
...squid
royalty free 3d model chain-cr-001 for download as stl on turbosquid: 3d models for games, architecture, videos. (1680536)
turbosquid
$99
![Honda CR-Z](/t/13331196.jpg)
Honda CR-Z
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Supply
turbosquid
$1
![supplies](/t/13504316.jpg)
supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![black supply](/t/11417159.jpg)
black supply
...black supply
3dexport
black supply size: 57.9 x 29.2 x 34 sm
turbosquid
$20
![Office Supplies](/t/13493851.jpg)
Office Supplies
...lty free 3d model office supplies for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1273636)
3d_export
free
![office supplies](/t/11741821.jpg)
office supplies
...office supplies
3dexport
turbosquid
$8
![Supply Drop](/t/13478219.jpg)
Supply Drop
...e 3d model supply drop for download as fbx, obj, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1663721)
turbosquid
$75
![Supply Helicopter](/t/13358780.jpg)
Supply Helicopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$65
![Supply Ship](/t/13256043.jpg)
Supply Ship
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
![Village Supplies](/t/13505872.jpg)
Village Supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
![Power Supply](/t/13322996.jpg)
Power Supply
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
![school supplies](/t/13411658.jpg)
school supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fan
3d_export
$5
![fan](/t/11922825.jpg)
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
![Fan](/t/953593.jpg)
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
![Fan](/t/951686.jpg)
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
![fan](/t/11919863.jpg)
fan
...fan
3dexport
is an ancient fan
3ddd
$1
![Fan-C-Fan by marco gallegos](/t/867782.jpg)
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
![fan](/t/11502875.jpg)
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
![Fan](/t/13342586.jpg)
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
![Fan](/t/13458121.jpg)
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
![Светильник Fan](/t/908713.jpg)
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
![Fan](/t/13244417.jpg)
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)
Cover
archibase_planet
free
![Cover](/t/947874.jpg)
Cover
...cover
archibase planet
cover place setting
cover n170807 - 3d model for interior 3d visualization.
3ddd
$1
![cover](/t/613599.jpg)
cover
...cover
3ddd
ковер , круглый
cover decor
archibase_planet
free
![Cover](/t/946660.jpg)
Cover
...cover
archibase planet
cover place setting setting
servis-cafe1930 - 3d model for interior 3d visualization.
turbosquid
free
![Coverings](/t/13281327.jpg)
Coverings
...rings
turbosquid
free 3d model coverings for download as dwg on turbosquid: 3d models for games, architecture, videos. (1279391)
3d_export
$5
![plug cover](/t/11920444.jpg)
plug cover
...plug cover
3dexport
plug cover
turbosquid
$25
![Covers](/t/13238499.jpg)
Covers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
![manhole cover](/t/11459687.jpg)
manhole cover
...manhole cover
3dexport
manhole cover gost, stl, step
turbosquid
$5
![Street Gas Cover Manhole Cover](/t/13417047.jpg)
Street Gas Cover Manhole Cover
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
![Bed cover](/t/634379.jpg)
Bed cover
...bed cover
3ddd
постельное белье
very useful bed cover
3d_export
$5
![cpu cover](/t/11930604.jpg)
cpu cover
...cpu cover
3dexport
cpu cover, cpu box, sheet metal container
Power
turbosquid
$100
![power](/t/13374821.jpg)
power
...ower
turbosquid
royalty free 3d model power for download as on turbosquid: 3d models for games, architecture, videos. (1421990)
3d_export
$5
![Power](/t/12728252.jpg)
Power
...power
3dexport
3d_export
$5
![power outlets](/t/11920692.jpg)
power outlets
...power outlets
3dexport
power outlets
3ddd
$1
![lion power](/t/1003066.jpg)
lion power
...lion power
3ddd
лев , статуя
lion power gold sculpture
3ddd
$1
![Sea Power](/t/653090.jpg)
Sea Power
...
компас , море , часы
часы с компасом sea power
3ddd
free
![Meridiani / Power](/t/692445.jpg)
Meridiani / Power
...power
3ddd
meridiani , круглый
стол power производитель meridiani, диаметр 120,высота 67
3d_export
$5
![Power Surge](/t/11379177.jpg)
Power Surge
...power surge
3dexport
the power surge is a all mesh carnival ride to lower in game part count and lag
turbosquid
$8
![Airport Ground Power Unit (AXA Power )](/t/13359863.jpg)
Airport Ground Power Unit (AXA Power )
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
![Power Houser](/t/13318138.jpg)
Power Houser
...rbosquid
royalty free 3d model power houser for download as on turbosquid: 3d models for games, architecture, videos. (1333800)
3d_export
$5
![power outlet](/t/11493174.jpg)
power outlet
...power outlet
3dexport
power outlet<br>format file maya 2018, 3d max 2017, obj, fbx
6
3d_export
$18
![tulip 6](/t/11427092.jpg)
tulip 6
...tulip 6
3dexport
tulip 6
3d_export
$5
![hinge 6](/t/11920338.jpg)
hinge 6
...hinge 6
3dexport
hinge 6
3ddd
$1
![MASIERO / FLASHWOOD STL 6 + 6](/t/604601.jpg)
MASIERO / FLASHWOOD STL 6 + 6
...6
3ddd
masiero
торшер flashwood stl 6 + 6 фабрики masiero
http://www.masierogroup.com/c87_697/it/flashwood%20stl%206%20+%206.ashx
turbosquid
$110
![Atmos Cannon 2000 6*6](/t/13484178.jpg)
Atmos Cannon 2000 6*6
...yalty free 3d model atmos cannon 2000 6*6 for download as skp on turbosquid: 3d models for games, architecture, videos. (1528591)
turbosquid
$1
![ae 6 6 electric locomotive](/t/13479510.jpg)
ae 6 6 electric locomotive
... free 3d model ae 6 6 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707537)
turbosquid
$39
![A-6](/t/13251516.jpg)
A-6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![6 ковров](/t/629124.jpg)
6 ковров
...6 ковров
3ddd
ковры , ковер
6 ковров
turbosquid
$12
![Calligraphic Digit 6 Number 6](/t/13397639.jpg)
Calligraphic Digit 6 Number 6
...hic digit 6 number 6 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389336)
turbosquid
$19
![Case For Phone 6 Girl 6](/t/13461400.jpg)
Case For Phone 6 Girl 6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
![Iphone 6 & 6 Plus All](/t/13507443.jpg)
Iphone 6 & 6 Plus All
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.