Thingiverse
CR-10s Pro OEM Piezo (Orion) Mount (DD compatible, Dual Fan 5015, Part Fan 4010)) by maddin3d
by Thingiverse
Last crawled date: 4 years, 10 months ago
I built my own custom 3D Printer, and only used some Parts from one Brand or another.
In Case of my Gantry and Hotend: CR-10s Pro /MK8 /OEM.
My Direct Drive Bowden is a random china-clone.
5015 Dual Part-Fans and a 4010 Heatsink-Fan.
I wanted to use a Precision Piezo Orion PCB.
In order to fit this stuff together i created this build.
Nozzle X axis offset ~7mmmoved from left to right, to fit my personal Direct Drive solutionI mounted the bowden on top of the "red" gantry
Nozzle Y axis offset (didn't measure lol)
Nozzle Z axis offset ~2mmis lower than original, depends on the pcb height
This is only Direct Drive compatbile. DD mount is not included.I mounted my china bowden on top of the "red" gantry
PETG recommendedfor obivous reasons: heat, less brittle
In Case of my Gantry and Hotend: CR-10s Pro /MK8 /OEM.
My Direct Drive Bowden is a random china-clone.
5015 Dual Part-Fans and a 4010 Heatsink-Fan.
I wanted to use a Precision Piezo Orion PCB.
In order to fit this stuff together i created this build.
Nozzle X axis offset ~7mmmoved from left to right, to fit my personal Direct Drive solutionI mounted the bowden on top of the "red" gantry
Nozzle Y axis offset (didn't measure lol)
Nozzle Z axis offset ~2mmis lower than original, depends on the pcb height
This is only Direct Drive compatbile. DD mount is not included.I mounted my china bowden on top of the "red" gantry
PETG recommendedfor obivous reasons: heat, less brittle