Cr-10 Y Carriage by NSD3D

Last crawled date: 3 years ago

This is a Cr-10 Y carriage that I made to reduce weight. It was inspired from the one made by tiny machines.
First, this needs to be machined out of 0.125" aluminum (Or equivalent in metric. 3mm will work). I used 6061, but I don't think it will matter. No, this cannot be printed, unless you have found a filament as stiff as aluminum. (If so, let me know what it is ;))
All of the hole sizes can be measured in whatever CAM software you are using. (I used Mastercam) If you want to modify it, then use the step file, as my file is pretty messy.
After installing, all my prints look great. Not sure if this mod improves print quality a ton, but it definitely does not make it worse.
Happy making,
NSD3D