Thingiverse
CR-10 Y-axis Linear Rail Mod by junaling
by Thingiverse
Last crawled date: 4 years, 2 months ago
Replacement for the y-axis rollers.
https://youtu.be/2iXEwumG1BI
Bed plate drill guide : https://www.thingiverse.com/thing:2924367
Hardware:
Rod holder: 12x m4 12mm bolts, 4x m4 nuts (locking recommended), 8x m4 hammer nuts, 16x m4 washers
Blocks: 16x m4 30mm bolts, 16x m4 nuts (locking recommended), 16x m4 washers
Linear Rods: 2x 8mm diameter, 500mm long linear rods
End Stop: 1x m4 20mm
Linear Bearing: Igus Drylin RJ4JP-01-08 or
spiral_vase-linear_bearing_10 from https://www.thingiverse.com/thing:2537701 (this is what I use, follow link for printing instructions, or to make/design your own)
Printed Parts:
2x drill guide
2x rod_holder
1x half_block_161mm_apart-1
1x half_block_161mm_apart_end_stop-1
4x half_block
Note: print with ABS or PETG, especially if using an enclosure
Instructions:
Do not overtighten bolts, printed parts will easily crack
https://youtu.be/2iXEwumG1BI
Bed plate drill guide : https://www.thingiverse.com/thing:2924367
Hardware:
Rod holder: 12x m4 12mm bolts, 4x m4 nuts (locking recommended), 8x m4 hammer nuts, 16x m4 washers
Blocks: 16x m4 30mm bolts, 16x m4 nuts (locking recommended), 16x m4 washers
Linear Rods: 2x 8mm diameter, 500mm long linear rods
End Stop: 1x m4 20mm
Linear Bearing: Igus Drylin RJ4JP-01-08 or
spiral_vase-linear_bearing_10 from https://www.thingiverse.com/thing:2537701 (this is what I use, follow link for printing instructions, or to make/design your own)
Printed Parts:
2x drill guide
2x rod_holder
1x half_block_161mm_apart-1
1x half_block_161mm_apart_end_stop-1
4x half_block
Note: print with ABS or PETG, especially if using an enclosure
Instructions:
Do not overtighten bolts, printed parts will easily crack