CR-10 v2 Prusa Style Titan Extruder Mount

Last crawled date: 4 years, 2 months ago

This is a remix of Spoegler-Engineering's Prusa i3 MK2 extruder for the E3D Titan extruder. Print in ABS or PETG with 75% infill on the carriage plate and Titan mount with 30% on the fan casings. The design uses the stock CR-10 v2 fans that came with the printer.
I have also included a step file of the X-axis carraige if anyone wants to create their own design.
You will need:
2 - M3x30mm screws
1 - M3x25mm screw for the bottom right hole of the "CR-10v2_Titan_extruder_mount"
3 - M3x12mm screws to mount the carriage plate to the x-axis gantry
3 - M3 nylon lock nuts mount the carriage plate to the x-axis gantry
3 - M3 nuts to mount the "CR-10v2_Titan_extruder_mount" to the "CR10v2_Carriage_plate"
4 - wires to extend the E stepper motor leads. Or you can buy extension cables.