Cr 10 Hemera Mount + Drag Chain mount by Ryanrocksforever

Last crawled date: 4 years, 2 months ago

This is a mod for a CR 10 or likewise printer for an e3d hemera to be mounted. This Mount uses a 4 wheel gantry which I found to be much sturdier than the default 3 wheel one. This mount does require two holes to be drilled into the gantry plate, but they are small, so they will not compromise the integrity of the gantry. To mount the gantry, you must disassemble the default x gantry first. To mount the new x gantry you must first put in the bottom hemera mount screw, then slide the gantry on to the v slot extrusion. Once on the extrusion you can screw in the top screw. the bottom screw may require sanding or filing of the head so it does not rub on the extrusion. I have also included a drag chain mount for the hemera, and a mount for a 8mm pinda probe.