Thingiverse
CR-10 Controlbox Stand with Non-slip Pads and Fan Mod
by Thingiverse
Last crawled date: 5 years, 10 months ago
This is designed to be a durable stand for the CR-10 controlbox. Non-Slip pads can be printed in flexible PLA or TPU to hold everything in place in a secure manner.
The Fan mod is for fans of standard dimensions: 120x120x25 and is fixed with 4 sets of M3 screws. Internal gaskets dampen the vibrations of the fan quite well and can also be printed out in Flex PLA or TPU.
This will hopefully improve your CR-10 setup !
DISCLAIMER: the fan mod requires to modify the controlbox itself and the inner power supply as well. This may expose the internal live connections with potentially lethal power. Use at your own risk.
The Fan mod is for fans of standard dimensions: 120x120x25 and is fixed with 4 sets of M3 screws. Internal gaskets dampen the vibrations of the fan quite well and can also be printed out in Flex PLA or TPU.
This will hopefully improve your CR-10 setup !
DISCLAIMER: the fan mod requires to modify the controlbox itself and the inner power supply as well. This may expose the internal live connections with potentially lethal power. Use at your own risk.