Thingiverse
COVID 19 - RESPIRATOR - ONE WAY VALVE - TESLA by Costa_D
by Thingiverse
Last crawled date: 5 years, 5 months ago
ONE WAY VALVE - TESLA - RESPIRATOR
Full printed part. Part was design to print without support. A temporary bridge was design near connections, remove the 0.2mm material after printing. Clean, wash and sanitize the part before using.
Connections - 3/4 AND 22mm hose.
Equipped with 2 - 4mm holes. Use 4mm bolts to secure the part, or to plug the unused holes.
One way valve, following TESLA design, to equip Medical Respirator.
Design was not tested as a medical part. This is last resort solution. Use your own judgement!
Be Safe! Stay Safe!
Full printed part. Part was design to print without support. A temporary bridge was design near connections, remove the 0.2mm material after printing. Clean, wash and sanitize the part before using.
Connections - 3/4 AND 22mm hose.
Equipped with 2 - 4mm holes. Use 4mm bolts to secure the part, or to plug the unused holes.
One way valve, following TESLA design, to equip Medical Respirator.
Design was not tested as a medical part. This is last resort solution. Use your own judgement!
Be Safe! Stay Safe!