Thingiverse
Coupling 5 to 8 mm for trapezoidal lead screw by ursus63
by Thingiverse
Last crawled date: 4 years, 3 months ago
Coupling 5 to 8 mm for trapezoidal screw. It has good centring and reliability.
You need 6 m3 nuts. 3 6mm screws and 3 8mm DIN913(or similar). You can use any screws if u want generally.
In the hole for motor shaft you can see recess. Try to make the seam there. You can do this from Kisslicer for example. I don't know if other slicers can do this.
May be you have to drill a hole for motor shaft a little.
You need 6 m3 nuts. 3 6mm screws and 3 8mm DIN913(or similar). You can use any screws if u want generally.
In the hole for motor shaft you can see recess. Try to make the seam there. You can do this from Kisslicer for example. I don't know if other slicers can do this.
May be you have to drill a hole for motor shaft a little.