Corner LED lamp by yeoldeporkpie

Last crawled date: 3 years ago

Easy print, great looking, and compact corner LED lamp.
See it in action: https://gofile.io/d/9rG8Fp
What you need to print
12x tube (no support, vertically)
1x base (with supports)
3x top_cap (no support, vertically)
1x top_support_32mm or top_support_110mm.stl depending how far you want the lamp away from the wall (no support)
Print tips
Make sure you have enough infill and at least 3 layers for the bottom/top and walls. Overall, the construction is a bit on a wiggly side: that's why we need the top_support. I suggest top_support_110mm.stl.
You can mount the top support using a small piece of double-sided tape. You can also fix base using double-sided tape if you have hardwood floors.
Hardware
WS2812B LED strip - I'm using a 16.4FT / 5M - 300 LED density -- It's pretty cheap and gives enough of light to decorate your walls (https://www.amazon.ca/gp/product/B07WD6L31K/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
a small ESP8266 dev board -- I'm using IZOKEE D1 Mini - it's 100% Compatible with WeMos D1 Mini (https://www.amazon.ca/gp/product/B076F53B6S/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1)
A 5V/3A (for 100 LEDs) power supply (100 of WS2812B at 100% brightness is approximately 3A; choose your power supply depending of your LED strip) with an input jack (https://www.amazon.ca/gp/product/B078RXZM4C/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1)
Software
I'm using slightly modified software from NimmLor. You can find my version at https://sr.ht/~yeoldeporkpie/corner-led/ and the original one at https://github.com/NimmLor/esp8266-fastled-iot-webserver
Instructions
Available at https://github.com/NimmLor/esp8266-fastled-iot-webserver/blob/master/Software_Installation.md