Thingiverse
Core XY for 3UP by napierm
by Thingiverse
Last crawled date: 3 years ago
Simple modification to add core XY drive to 3UP or really any Hbot printer. Print 2 each of the A and B parts, normal and reversed. You'll need two Misumi HBLFSN5-C corner brackets. Also, 4 F624ZZ flanged bearings, 4 M3X35mm screws, 2 M5x8 screws and M3 nuts (Trimcraft RC). Also a length of spacing material to sleeve up from M3 to M4 inside the bearing. I used a brass tube from KS Engineering (Ace Hardware) 5/32x.014 (3.97mm x .355mm) Stock #128. The real trick is to move one drive pulley up 3mm and one down 3mm so that the belt crosses over without touching. The resulting drive is totally smooth and eliminates the Hbot X gantry wiggling. You may need to shorten the inside mounting screw for the stepper motor to keep it from bottoming out. You will also need a belt that is longer to account for the cross between the two driving stepper motors.
Similar models
thingiverse
free
Nema 17 stepper motor Belt tensioner by Flytech81
...that mounts to a nema 17 stepper motor using m3 screws. for the tensing hardware i used two 8mm bearings with a 1/4-20 inch bolt.
thingiverse
free
Ender 3 Direct Drive Adaptor
...end. you will need to experiment with the length of this piece as it may be slightly different on your ender 3. roughly 60-66 mm.
thingiverse
free
Prusa X Belt - Extruder Fix (keeps the belt away from the stepper motor) by ooxtcoo
... treaded rod
3.) 1x m3 nut
4.) 2x m3 washers
5.) 1x m3x20 screw
6.) 1x 608z bearing
7.) 2x big m8 washers
8.) 3x small m8 washers
thingiverse
free
One-Up / Two-Up XY slim carriage by NoelJean
...a bowden extruder !
update v2:
i needed mor space to let some screws slide under the bearing, plus some space for a belt spring.
thingiverse
free
TRONXY X5S - Z motor sync by WT1704
...e platform on the stepper and 3 * m5 screws and nuts for the pulley
1 * m3 screw and nut to hold the tension stick with the block
thingiverse
free
Folger 2020 i3 X Belt Tensioner by jmbneaf
...rews, 1 m3 nut (to clamp/hold together), and two f623z bearings (two 623zz bearings will work also)
here is the revised design.
thingiverse
free
Belt-and-pinion for a standard NEMA motor by tamarintech
...)
2 x 608 bearings
(optional) metal washers to use in place of the printed ones and for securing the whole thing to the motor
thingiverse
free
Z-axis stopp by TheFew
... frame of the x axis from motor and the ground with longer screws to the stepper motor.
you need:
clue; 2 m3 nuts and a m3 screw
thingiverse
free
3UP Printer XY Bearing parts for 608 BB by napierm
...nd don't want to buy more parts. bought 16 608rs bearings (they are cheap) and might as well use them though out the design.
thingiverse
free
Anet A8 Y-belt tensioner V2 by YoshiCat
...vot point.
i used three m3 washers on the bearings, one between the bearings and the other two between the bearing and the frame.
Napierm
thingiverse
free
3UP version 1.5.1 x-slider with supports by napierm
...added thin supports to x-slider-a so it can be printed easier standing upright. it is much stronger printed in this orientation.
thingiverse
free
Gusset Plate by napierm
...own to print. really helps to stiffen up a frame.
trimcraft rc has very good prices on socket head and button head m5x10 screws.
thingiverse
free
Z slider A back by napierm
... with at least 300mm travel in each axis. so far the build is progressing well. will publish a bom when it is actually working.
thingiverse
free
3UP Z bracket A2 thickened by napierm
...nto pockets to make them less likely to strip out. print with 2 shells and 40% hex infill. use an m3x10 screw to seat the nuts.
thingiverse
free
Leg for 2020 by napierm
...allen wrench through the nut. works great. could use a 1/4-20 jam nut to secure. could use some rubber under the foot as well.
thingiverse
free
LRI Probe by napierm
...nt to cover over the airspeed numbers. use white, red, green, and yellow testors paint to color the lri gauge. works perfectly.
thingiverse
free
3UP Z bracket B Idler Pulley by napierm
...e scaled as needed to align the pulley with the belt. the peg needs a m3x30 ss socket head screw -> trimcraft rc is a source.
thingiverse
free
3UP Printer XY Bearing parts for 608 BB by napierm
...nd don't want to buy more parts. bought 16 608rs bearings (they are cheap) and might as well use them though out the design.
3Up
thingiverse
free
3uP Caps by all3dprinting
...3up caps by all3dprinting
thingiverse
caps for the aluminum extrusions used on the 3up 3d printer.
thingiverse
free
3uP Idler Pulley by darkgrue
...apts the openbuilds smooth idler pulley wheel kit to the 3up.
this replaces part z_drive_b1 and z_drive_b2 in the 3up assembly.
thingiverse
free
Cable Chain for 3up by Kthorpe88
...cable chain for 3up by kthorpe88
thingiverse
here is a cable chain setup for the 3up printer that sits inside the printer
thingiverse
free
3uP Printrboard Mount by darkgrue
...rovisions to support the mount with two misumi hblfsnf5 brackets, which greatly increases the strength and rigidity of the mount.
thingiverse
free
3uP Mods and Upgrades by DDeGonge888
...custom upgrades for the 3up including a more advanced switch panel and a spool holder!http://www.thingiverse.com/bpopilek/designs
thingiverse
free
3uP bed mounts for Helios heat bed by Kthorpe88
...rpe88
thingiverse
here are some modified 3up bead nut holders that will allow the helios heat bed to mount to the 3up bed frame.
thingiverse
free
3UP + E3D + Blower Fan Duct by JvdP
...3up + e3d + blower fan duct by jvdp
thingiverse
fan duct for the 3up with an e3d hotend and 50x50 blower style fan.
thingiverse
free
3uP Fan Bracket (EZStruder) by darkgrue
...p fan bracket to adapt it to the direct mount seemecnc ezstruder.
requires the original fan duct fan_bracket_b.stl to complete.
thingiverse
free
3uP Power Supply Mount by darkgrue
... 30a power supply (e.g. 12v 30a dc universal regulated switching power supply 360w for cctv, radio, computer project) to the 3up.
thingiverse
free
3uP Power Switch Mount by darkgrue
...ncreases the interior dimensions to deal with material shrinkage, and adds a round cable opening (rather than a rectangular one).
Xy
3ddd
$1
Вешалка напольная XY-027
...а штанги: 171 см
диаметр основания: 38 смhttp://mebelshopos.ru/aksessuary-ofisnye/veshalka-napolnaya-xy-027-detail.html
turbosquid
$9
XY Rectangular Dining Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
holly hunt xy bench
...eight: 17.75 in
width: 45 in, 26 in
depth: 18 in
больше превьюhttps://www.behance.net/gallery/24983999/bench-3d-model?
turbosquid
$8
Xy fine tuning handle adjusts the module
...odule for download as 3ds, max, ige, obj, fbx, stl, and sldas on turbosquid: 3d models for games, architecture, videos. (1331394)
3ddd
$1
pillows bed 2
...pillows bed 2 3ddd подушка , круглая dimensions: xy ...
3ddd
$1
Honeycomb Floor
...паркет parquet with metalic honeycomb floor demensions 500x500 cm xy multitexture +...
3d_export
$7
positioning screw mechanism
...and lead screw, constitute a double displacement adjustable mechanism, xy axis double position adjustable positioning.<br>**************************************<br>files format contains<br>-solidworks 2017<br>-step<br>-iges<br>- and...
3d_export
$9
positioning mechanism of heavy-duty platform
...activity -- ball mechanism activity ---- drive heavy load xy axis movement -- positioning completed<br>**************************************<br>files format contains<br>-solidworks 2017<br>-step<br>-iges<br>- and...
3d_export
$180
optical fiber laser marking machines assembly
...fiber laser marking machine<br>automatic loading and unloading laser marking machine<br>xy platform adjustable laser marking machine<br>laser marking machine used with...
thingiverse
free
XY ROBOT by ymtlab
...xy robot by ymtlab
thingiverse
xy robot
Core
turbosquid
$143
In the core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Skandiform Core
...skandiform core
3ddd
skandiform
кресло фирмы skandiform, модель core.
габаритные размеры (шхвхг): 530х700х510 мм
turbosquid
$8
Chandelier CORE
...id
royalty free 3d model chandelier core for download as max on turbosquid: 3d models for games, architecture, videos. (1673910)
turbosquid
free
Planet Core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Samsung Galaxy Core 2
...samsung galaxy core 2
3ddd
телефон
samsung galaxy core 2
turbosquid
$10
cable 2 core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
cable 1 core
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кондиционер ICE CORE
...кондиционер ice core
3ddd
кондиционер
37 000 полигонов
turbosquid
$65
Insulated Multi Core Cable
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Samsung Galaxy Core Advance
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.