Copic Pen Holder for Drawing Robot (Classic & Sketch compatible)

Last crawled date: 5 years, 8 months ago

I've redesigned the original pen holder from @henryarnold's Drawing Robot to fit Copic markers. This version of the pen holder is compatible with Copic Classic and Sketch markers, but does also fit a wide variety of other markers that are too big for the standard holder.
Required Hardware
1x M3*8 Screws (0.3 in)
1x M3*12 Screw (0.47 in) (optional)
1x M3 Nut
--
Additional, but Optional 3D Printed Parts
slider.stl (optional)
Metric_3_MM_Thumb_Screw_V4.stl (optional)
--
Instructions
The Copic pen holder fits on the standard slider, but since it's mounted with a M3*8 screw (0.3 in) and M3 nut for better stability, you have to clip off the tubular extrusion that fits the mounting screw on the slider. It's not even essential to attach the standard pen holder, but you can chose to print another slider (slider.stl), if you are uncomfortable with the idea.

You can either use the set screw from the standard pen holder to hold the marker in place, or additionally print another screw cap (Metric_3_MM_Thumb_Screw_V4.stl) from the original Drawing Robot things collection and use it with another M3*12 (0.47 in) screw.
--
Please leave a feedback and if you like my creation a tip is also welcome. ;)