Cults
Conversion kit for making a flyable Revell 1:32 Westland Lynx kit.
by Cults
Last crawled date: 6 years, 2 months ago
NEWS:
New main blade uploaded. It's tapered, with a thinner tip and flies really well.
OLD NEWS:
I made a new main frame bottom piece and the part for the swash anti rotation bracket, for adjustment of the swash phase in 10° steps.
Disclaimer: This project has potential dangers. Use protective goggles to avoid injury should anything break. I have not experienced any failures myself, but different material manufacturers and printers can give different results. Proceed at your own risk.
Print the following from PLA:
Mainframe01.stl - Parts for the main frame for the Revell 1:32 Sea Lynx. (or PETG for motor heat resistance)
Micromaintotor02.STL - Main rotor pitch link rotation guide.
Tailrotor02.STL - Tail rotor and pitch change beam.
Swashlinks02.STL - Rod ends for the Blade CP swash plate ball ends.
Spacer.STL - Spacers for the main shaft.
Mainblade03.STL - Thicker main blade model. Stiffer, but more drag. Seems to fly about the same as the thinner blades, but is stiffer.Print if you have problems with blade flutter.
Mainblade05-tapered.STL - Tapered blade. Flies well. This is the recommended blade.
Print the following from Taulman 910:
Micromaintotor01.STL - Main rotor hub.
Scissor02.STL - Scissor links with flex hinges for the main landing gear.
Parts list:
Assorted M2 screws and M3 set screws.
2x ball bearings 3x6x2,5mm
3mm steel rod for main shaft.
3x servos Turnigy™ TGY-D56LV: https://hobbyking.com/en_us/turnigytm-tgy-d56lv-coreless-low-voltage-ds-mg-servo-0-89kg-0-10sec-5-6g.html
Main gear: 128-136 tooth Active Hobby 84 Pitch CNC Composite Spur Gear: https://hobbyking.com/en_us/active-hobby-132t-84-pitch-cnc-composite-spur-gear.html
Pinion: GWS 0,3 mod 10t brass pinion (or similar 0,3 mod/84 pitch).
Main motor: EH200 Brushless Outrunner 4100kv, or similar 3000-4000 kv motor: https://hobbyking.com/en_us/eh200-brushless-outrunner-4100kv.html
Tail motor: NTM Prop Drive 13-12 2400KV, or similar 2400-2600kv motor: https://hobbyking.com/en_us/ntm-prop-drive-13-12-2400kv-40w.html
I used an E-FLITE EFLH1152 Blade CP Swashplate. It needed to be modified by bending the outer ends inwards gently under heat to fit inside the top of the fuselage.
The illustration shows how the parts of the main frame and servos go together. Use 1,6 mm steel wire to make the anti rotation bracket. I recommend installing it in the pictured holes. That will put the rotor in the right phase for near vertical pitch links. Use your maker skills to assemble it to your liking. It's for advanced builders who understand how helicopters work and go together.
The main frame is assembled with #0x1/4 screws. Servos as well. Make the main shaft from steel and drill holes for a 1mm main gear locking pin, and a flat on the top for the main rotor set screws. I made the point of the rotor set screw into a pin that goes through a hole in the shaft for extra security.
After the main blades have been printed, bend the tips down about 20° to resemble the BERP tips of the full size helicopter.
After the tail rotor has been printed, gently twist the blades at the root to give the appropriate pitch, about 10-20° should be enough. I have made many tail rotors, and this works every time. They only fail if they hit something.
This video shows how the flight controls should operate. The swashplate is rotated 120° compared to the usual arrangement with two bladed rotors. When testing, rotate the main rotor pitch link rotation guide between flights until there is no coupling between roll and pitch:
https://youtu.be/VuhCTazcsxA
My Lynx now flies great at around 3200 RPM.
New main blade uploaded. It's tapered, with a thinner tip and flies really well.
OLD NEWS:
I made a new main frame bottom piece and the part for the swash anti rotation bracket, for adjustment of the swash phase in 10° steps.
Disclaimer: This project has potential dangers. Use protective goggles to avoid injury should anything break. I have not experienced any failures myself, but different material manufacturers and printers can give different results. Proceed at your own risk.
Print the following from PLA:
Mainframe01.stl - Parts for the main frame for the Revell 1:32 Sea Lynx. (or PETG for motor heat resistance)
Micromaintotor02.STL - Main rotor pitch link rotation guide.
Tailrotor02.STL - Tail rotor and pitch change beam.
Swashlinks02.STL - Rod ends for the Blade CP swash plate ball ends.
Spacer.STL - Spacers for the main shaft.
Mainblade03.STL - Thicker main blade model. Stiffer, but more drag. Seems to fly about the same as the thinner blades, but is stiffer.Print if you have problems with blade flutter.
Mainblade05-tapered.STL - Tapered blade. Flies well. This is the recommended blade.
Print the following from Taulman 910:
Micromaintotor01.STL - Main rotor hub.
Scissor02.STL - Scissor links with flex hinges for the main landing gear.
Parts list:
Assorted M2 screws and M3 set screws.
2x ball bearings 3x6x2,5mm
3mm steel rod for main shaft.
3x servos Turnigy™ TGY-D56LV: https://hobbyking.com/en_us/turnigytm-tgy-d56lv-coreless-low-voltage-ds-mg-servo-0-89kg-0-10sec-5-6g.html
Main gear: 128-136 tooth Active Hobby 84 Pitch CNC Composite Spur Gear: https://hobbyking.com/en_us/active-hobby-132t-84-pitch-cnc-composite-spur-gear.html
Pinion: GWS 0,3 mod 10t brass pinion (or similar 0,3 mod/84 pitch).
Main motor: EH200 Brushless Outrunner 4100kv, or similar 3000-4000 kv motor: https://hobbyking.com/en_us/eh200-brushless-outrunner-4100kv.html
Tail motor: NTM Prop Drive 13-12 2400KV, or similar 2400-2600kv motor: https://hobbyking.com/en_us/ntm-prop-drive-13-12-2400kv-40w.html
I used an E-FLITE EFLH1152 Blade CP Swashplate. It needed to be modified by bending the outer ends inwards gently under heat to fit inside the top of the fuselage.
The illustration shows how the parts of the main frame and servos go together. Use 1,6 mm steel wire to make the anti rotation bracket. I recommend installing it in the pictured holes. That will put the rotor in the right phase for near vertical pitch links. Use your maker skills to assemble it to your liking. It's for advanced builders who understand how helicopters work and go together.
The main frame is assembled with #0x1/4 screws. Servos as well. Make the main shaft from steel and drill holes for a 1mm main gear locking pin, and a flat on the top for the main rotor set screws. I made the point of the rotor set screw into a pin that goes through a hole in the shaft for extra security.
After the main blades have been printed, bend the tips down about 20° to resemble the BERP tips of the full size helicopter.
After the tail rotor has been printed, gently twist the blades at the root to give the appropriate pitch, about 10-20° should be enough. I have made many tail rotors, and this works every time. They only fail if they hit something.
This video shows how the flight controls should operate. The swashplate is rotated 120° compared to the usual arrangement with two bladed rotors. When testing, rotate the main rotor pitch link rotation guide between flights until there is no coupling between roll and pitch:
https://youtu.be/VuhCTazcsxA
My Lynx now flies great at around 3200 RPM.
Similar models
cults
free
Fully Printable Fixed Pitch RC helicopter.
...for the swash plate: https://www.banggood.com/fs-racing-fs-53910-fs-53625-6pcs-582002-roll-bearing-10x15x4mm-110-rc-car-parts-p-1153527.html?p=hd240528697332015103 assorted #0 screws or similar self tapping 1-1,5mm diameter screws and ~6mm (~1/4") length....
cults
free
Fully Printable Collective Pitch RC helicopter.
...for the swash plate: https://www.banggood.com/fs-racing-fs-53910-fs-53625-6pcs-582002-roll-bearing-10x15x4mm-110-rc-car-parts-p-1153527.html?p=hd240528697332015103 assorted #0 screws or similar self tapping 1-1,5mm diameter screws and ~6mm (~1/4") length....
cults
free
Revell 1:32 Lynx Has.3 conversion kit from folding tail to fixed tail.
...oto shows the styrene parts. it will go on a flying rc converted kit, not a static display kit, so some scale compromises are ok.
cults
free
Flying Helicopter Toy - H145
...ur existing printed parts.
i put a little bit of vegetable oil on the main rotor shaft to ensure maximum blade speed and flight.
cults
$1
[Raptor 50] Retaining the tail of the tail rotor
... tiger
parts to hold the tail of the raptor 50 in place to prevent the tail strap from loosening or the tail rotor from rotating.
cults
free
Flying Helicopter Toy
...llor wing gear functional
ode to the childhood flying toys - pull this helicopter;s tail and its rotors will fly high in the air.
cults
free
Lynx Helicopter cookie cutters
...lynx helicopter cookie cutters
cults
lynx helicopter cookie cutters
lynx helicopter cookie cutters
cults
$23
Vario Lynx 1:8 external scale detail parts.
...center antenna.
hf02.stl - middle and rear hf antenna posts.
anticollision01.stl - anti collision lights for the top of the tail.
cults
free
Main Gear Box, Helicopter driven by 2-Engines
...15,2017)
new file (body-mid901.stl) and related photos are added to return "tail take-off output" at the same position.
cults
free
Jet Engine; Geared Turbofan (GTF), Optional-Fan
...ost printing:
- take care to remove the special support for damaging of the blade.
- finish blade edges and surfaces as required.
Revell
cults
free
Revell 1:32 Lynx Has.3 conversion kit from folding tail to fixed tail.
...oto shows the styrene parts. it will go on a flying rc converted kit, not a static display kit, so some scale compromises are ok.
cults
free
Mexican Revolution Armored Car
...ar armoured
mexican revolution armored car used by the northern revels!
print tested...ho scale
license public domain dedication!
cults
free
Day 16: The "puzzle ball"
...little stars suspended in children's rooms. now, reassured by these little starry night lights, they all slept peacefully ...
Westland
cults
$14
Scale helicopter seats. Westland Lynx 1:8 seats.
... with headrest.
seat03.stl - pillow, emergency seat pack and tray for the seat pack.
seat04.stl - shafts for the seat mechanism.
cults
$23
Vario Lynx 1:8 scale cabin and cockpit doors.
...and cockpit doors. cults vario lynx 7050 scale helicopter westland also check out my other vario lynx parts in...
cults
$24
Replacement nose for the Vario LYNX
...the vario lynx cults vario lynx 7050 scale helicopter westland agusta modification also check out my other vario lynx...
cults
$23
Vario Lynx 1:8 external scale detail parts.
...out my other vario lynx accessories: http://cults3d.com/en/various/replacement-nose-for-the-vario-lynx http://cults3d.com/en/various/vario-lynx-1-8-scale-cabin-and-cockpit-doors http://cults3d.com/en/various/vario-lynx-cockpit-interior http://cults3d.com/en/various/scale-helicopter-seats-westlandlynx-1-8-seats lynxguide.zip - photos showing the placement on my lynx.should...
Lynx
cults
free
Model of my Lynx velomobile.
...model of my lynx velomobile.
cults
model of my lynx velomobile.
model of my lynx velomobile.
cults
free
Lynx Helicopter cookie cutters
...lynx helicopter cookie cutters
cults
lynx helicopter cookie cutters
lynx helicopter cookie cutters
cults
$24
Replacement nose for the Vario LYNX
...ake on the top of the nose.
for a good walk around go here:
http://www.primeportal.net/hangar/jean_thomas_rembert/lynx_has.2_fn/
cults
$35
Vario Lynx 1:8 scale cockpit interior.
... cross tubes for the seat mechanism.
seat05 - floor clips for clipping on the seats. use 1.6 mm piano wire between the seat lugs.
cults
$14
Scale helicopter seats. Westland Lynx 1:8 seats.
... with headrest.
seat03.stl - pillow, emergency seat pack and tray for the seat pack.
seat04.stl - shafts for the seat mechanism.
cults
$23
Vario Lynx 1:8 scale cabin and cockpit doors.
... door handles and emergency release handles.
video of door removal and installation:
https://www.youtube.com/watch?v=mzdk6oaexa8
cults
free
Revell 1:32 Lynx Has.3 conversion kit from folding tail to fixed tail.
...oto shows the styrene parts. it will go on a flying rc converted kit, not a static display kit, so some scale compromises are ok.
cults
$23
Vario Lynx 1:8 external scale detail parts.
...center antenna.
hf02.stl - middle and rear hf antenna posts.
anticollision01.stl - anti collision lights for the top of the tail.
cults
$7
carisma SCA-1E lynx LYNXorv crawler armor zombie apocalypse
...ook zombies hunter
contains
a windshield shield
2 front glass shields
2 rear window shields
2 rear-facing glass shields
Conversion
cults
free
Steampunk Ogre Conversion Kit
...steampunk ogre conversion kit
cults
steampunk ogre conversion kit
steampunk ogre conversion kit
cults
free
Converse Shoe Cookie Cutter
...shoe
my mother is obsessed with converse shoes. so for christmas i hope to surprise her with her own converse shoe cookie cutter
cults
free
IKEA Lamp - Flower Pot Conversion
...ikea lamp - flower pot conversion
cults
ikea lamp - flower pot conversion
ikea lamp - flower pot conversion
cults
free
Converse All Star shoe and logo
...converse all star shoe and logo
cults
converse all star shoe and logo
converse all star shoe and logo
cults
free
P90 MWS CONVERSION PARTS
...i edit and delete the old files enjoy ;)
the rest of the parts finally arrived from china, it will be ready for upload very soon
cults
free
Cybernetic Sword Arm Conversion Bit (28mm/Heroic scale)
...rowing catalog of gaming miniatures that you can use for whatever you want! (psst... we take requests and commissions...)
enjoy!
cults
free
Revell 1:32 Lynx Has.3 conversion kit from folding tail to fixed tail.
...oto shows the styrene parts. it will go on a flying rc converted kit, not a static display kit, so some scale compromises are ok.
cults
$12
Handguard for 98L Tippmann CRONUS MOD
...tippmann cronus mod cults paintball magfed mag fed cronus conversion mod handguard rail keymod i added a handguard which...
cults
free
Slab support
...height, ideal for coding. fyi, i added a video conversion ...
Helicopter
cults
free
Lego Helicopter
...lego helicopter
cults
lego helicopter
lego helicopter
cults
$1
Helicopter child
...er child
simple, beautiful and functional.
in 4 part, the body, rear propeller, propeller from the top and propeller clip.
cults
$1
Cartoon helicopter
...rsonalize: choose the colors of your filaments, print the parts separately (no need for support) and assemble (no need for glue).
cults
free
Lynx Helicopter cookie cutters
...lynx helicopter cookie cutters
cults
lynx helicopter cookie cutters
lynx helicopter cookie cutters
cults
free
Flying Helicopter Toy
...llor wing gear functional
ode to the childhood flying toys - pull this helicopter;s tail and its rotors will fly high in the air.
cults
free
Multi-Color Flying Helicopter Toy
...multi-color flying helicopter toy
cults
multi-color flying helicopter toy
multi-color flying helicopter toy
cults
$25
helicopter - copter - apache - US army - LV3D
...ere is a helicopter model that i modeled on blender and printed. all the parts are separated then it is necessary to assemble it.
cults
free
Duplo Compatible Mini Helicopter
...ricks for size reference from here https://www.thingiverse.com/thing:615256
the .step file is included if you like to customize.
cults
free
Flying Helicopter Toy - H145
...ur existing printed parts.
i put a little bit of vegetable oil on the main rotor shaft to ensure maximum blade speed and flight.
cults
free
Main Gear Box, Helicopter driven by 2-Engines
...15,2017)
new file (body-mid901.stl) and related photos are added to return "tail take-off output" at the same position.
32
cults
free
Antonov An-32
...antonov an-32
cults
antonov an-32. the model is redone from an-26 (new wings, airscrews)
cults
free
Naze 32 case
...naze 32 case
cults
drone uav
naze 32 case
cults
free
OpenRailway EMD SW1500 1:32 Locomotive
...openrailway emd sw1500 1:32 locomotive
cults
openrailway emd sw1500 1:32 locomotive
openrailway emd sw1500 1:32 locomotive
cults
$5
Twinning traktor tire 1/32 (d=50mm)
...twinning traktor tire 1/32 (d=50mm)
cults
model traktor tire 1/32 scale
scale 1/32
cults
free
Grain trailer 1/32
...grain trailer 1/32
cults
remoque miniature agricultural
some adjustments will be made
cults
free
Cute mass 1/32
...cute mass 1/32
cults
mass miniature agricultural
cute converted farming simulator 17
cults
free
32-Point Urchin Sculpture
...32-point urchin sculpture
cults
desk_toys sculpture
desk toy/sculpture that resembles sea urchin.
cults
free
bike support go pro diameter 32 mm
...bike support go pro diameter 32 mm
cults
camera
support go pro diameter 32 mm for bike handlebars
cults
free
Godet a grain 1/32
...godet a grain 1/32
cults
agriculture miniature
gedet a grain converted from farming simulator 17
cults
$4
Mini Doll House Stool
...stool will work in most doll houses it is 32 millimeters long, 32 millimeters wide, and 18 millimeters tall....
Rc
cults
free
RCS Malebot
...rcs malebot
cults
rcs malebot
rcs malebot
cults
free
RCS Hex Chain
...rcs hex chain
cults
rcs hex chain
rcs hex chain
cults
free
RCS Tree Ornaments
...rcs tree ornaments
cults
rcs tree ornaments
rcs tree ornaments
cults
free
RC Plane Stand
...rc plane stand
cults
rc plane stand
rc plane stand
cults
free
Skis for RC planes
...skis for rc planes
cults
skis for rc planes
skis for rc planes
cults
free
RCS Vacuum mold
...rcs vacuum mold
cults
rcs vacuum mold
rcs vacuum mold
cults
$2
Rc dashboard ladybug / beetle for RC 1/10
... drift scale beetle vw classic car rc car
dashboard and fly for rc 1/10 tamiya ladybug / bettle
attention to l scale of the fly
cults
$21
Flying Wings RC
...flying wings rc
cults
flying wings rc
cults
$3
Nitro RC horns
...nitro rc horns
cults
aileron modeling rc traxxas
3d model of an aleron for an automodelo rc 1/10 or 1/8.
cults
free
RC model engine
...rc model engine
cults
this is a mockup of an enya rc model engine.
Kit
cults
free
Lamp Shade Kit
...lamp shade kit
cults
lamp shade kit
lamp shade kit
cults
free
XMAS KIT by be3D
...xmas kit by be3d
cults
xmas kit by be3d
xmas kit by be3d
cults
free
chemistry and biology kit
...chemistry and biology kit
cults
chemistry and biology kit
chemistry and biology kit
cults
free
Athena Makeover Kit
...athena makeover kit
cults
athena makeover kit
athena makeover kit
cults
free
Insert kit
...insert kit
cults
toy game insert children child play toys learn
insert kit for children from 1 to 3 years old
cults
$20
Printable Architectural Kit 1
...printable architectural kit 1
cults
printable architectural kit 1
printable architectural kit 1
cults
free
DIY Sand casting kit
...diy sand casting kit
cults
diy sand casting kit
diy sand casting kit
cults
free
Steampunk Ogre Conversion Kit
...steampunk ogre conversion kit
cults
steampunk ogre conversion kit
steampunk ogre conversion kit
cults
free
FPV kit for Turnigy 9XR
...fpv kit for turnigy 9xr
cults
fpv kit for turnigy 9xr
fpv kit for turnigy 9xr
cults
free
Google Cardboard kit upgrade
...google cardboard kit upgrade
cults
google cardboard kit upgrade
google cardboard kit upgrade
1
cults
free
Bracelet No 1
...bracelet no 1
cults
bracelet no 1
bracelet no 1
cults
free
Hook, +1
...hook, +1
cults
hook +1
hook, +1
cults
free
Pokale 1-3, Winnercup 1 - 3
...pokale 1-3, winnercup 1 - 3
cults
pokale 1-3 winnercup 1 - 3
pokale 1-3, winnercup 1 - 3
cults
free
Super Mario Bros World 1-1
...super mario bros world 1-1
cults
super mario bros world 1-1
super mario bros world 1-1
cults
free
Pythagoras Tree (1:1:Sqrt2)
...ap a little bit. the structure is very easy to design in 123d design using the basic idea of similarity. yes, this is a fractal.
cults
$1
Bowl 1
...bowl 1
cults
bowl household mug bread kitchen go flagon
bowl 1
cults
free
Wind Vase 1
...wind vase 1
cults
wind vase 1
wind vase 1
cults
free
magnet mushroom 1
...magnet mushroom 1
cults
mushroom magnet 1
magnet mushroom 1
cults
free
3D Fabric 1
...3d fabric 1
cults
3d fabric 1
3d fabric 1
cults
free
Pumpkin Vase 1
...pumpkin vase 1
cults
pumpkin vase 1
pumpkin vase 1
Making
cults
free
To Make or not to Make
...u miss your high school science classes or want to recreate that feeling at home. you can also easily play hamlet in modern time!
cults
free
Make Anything Stamp
...make anything stamp
cults
make anything stamp
make anything stamp
cults
$25
churros making machine
...churros making machine
cults
churrera machine churros make churros
artisan churros machine
machine to make homemade churros
cults
free
plug and make
...tibcoefjzs
assembly instructions -> http://antoinetaillandier.com/wp-content/uploads/2017/05/plug-and-make-notice.pdf
cults
free
Make a cookie cutter easily!!
...make a cookie cutter easily!!
cults
make a cookie cutter easily!!
make a cookie cutter easily!!
cults
$10
little machine to make hamburgers
...o hamburgers (machine make hamburgers)
manual machine to make handmade hamburgers
manual machine to make handmade hamburgers
cults
$10
little machine to make square hamburgers (little machine to make square hamburgers)
...e machine to make square hamburgers)
cults
machine to make square handmade burgers
little machine to make square hamburgers
cults
free
Patterns for mold making 2
...e is used to encapsulate these pieces to create the molds for the candy/ chocolate. at 4 cm they are printable without supports.
cults
free
Cubotic - Connecting Makes & Makers
...- connecting makes & makers
cults
cubotic - connecting makes & makers
cubotic - connecting makes & makers
cults
free
Patterns for mold making 1
...ble without supports. printed at 0.06mm/layer, 0.8 shell thickness. very minimal cleaning required if your machine is well tuned.
A
cults
$615
ying yong pour pendentif ou boucle d'oreilles
...boucle d'oreilles cults ying yong pour pendentif ou boucle d≈#39;oreilles ying yong pour pendentif ou boucle...
cults
$368
Homework visualizer
...e computer. the usb port is on the stand which allows the visualizer to be stable. on the arm there are the light and the camera.
cults
$368
School Visualizer
...visualizer is better because it is made in cardboard (ecofriendly) and it's so easy to assemble and not expansive to product.
cults
$368
School Visualizer Heinis
...you to control the camera (zoom in, zoom out), store a usb cable and much more.
height: 10 cm
length: 30 cm
width: 25 cm
cults
$368
ETLV Homework
...etlv homework cults lll visualizer sti2d i'm a sti2d student at mermoz high school, and i have...
cults
$368
Accessible Sustainable Development School Visualizer - Mermoz High School
...eived ...
@evanshelbytech
https://twitter.com/evanshelbytech?lang=fr
evan shelby
https://www.youtube.com/evanshelby
cults
$368
female statue
...female statue
cults
goddess of flowers sculpted in zbrush
cults
$319
FRACTAL Cover
...fractal cover
cults
fractal cover
fractal cover
cults
$147
visualizers
...ualizer is little and has much usb port.
in this visualizer there is two weight for improving stability.
he is easly carriest
cults
$145
Boeing 737 replica of power levers in real scale for decoration 3D print model
...has no electronic function. made only on order, it will be shipped within 8 days after purchase, time required for manufacturing.