Thingiverse
Connector Shield for powering two 3D printers by Bash-T
by Thingiverse
Last crawled date: 4 years, 1 month ago
I'm currently building a case that contains the PSUs and control boards and stuff to power up two 3D printers @24V.
This is a shield/plate that is used to be mounted on the bottm/side of the box that leads every kind of connector that is needed for the printers to this single shield.
Easy plugging and unplugging of the printers was the goal while designing this shield without scrabbling around inside the control box.
It is designed to use the following types of connectors:
T-Connectors
Dupont Connectors
JST-XH Connectors
Please take a look at the scetch I uploaded for clearance which connector is used for what.
This is a shield/plate that is used to be mounted on the bottm/side of the box that leads every kind of connector that is needed for the printers to this single shield.
Easy plugging and unplugging of the printers was the goal while designing this shield without scrabbling around inside the control box.
It is designed to use the following types of connectors:
T-Connectors
Dupont Connectors
JST-XH Connectors
Please take a look at the scetch I uploaded for clearance which connector is used for what.