Thingiverse
Connector for Rotating Fishing Lure Drying Rack by Buspojke
by Thingiverse
Last crawled date: 4 years, 2 months ago
I´ve made a little connector for 230 volts microwave owen plate motors. These motors rotate 3-6 rpm and are quite easy to find in europe.
To use this setup, you have to drill the holes for the original motor, then put some M5 through the holes, some nuts as distances and more nuts to hold the motor.
The connector is glue with CA-glue to the wheel.
Must say it works very well, all cred to Steve Thone who made the original!
Link to original: https://www.thingiverse.com/thing:1740441
To use this setup, you have to drill the holes for the original motor, then put some M5 through the holes, some nuts as distances and more nuts to hold the motor.
The connector is glue with CA-glue to the wheel.
Must say it works very well, all cred to Steve Thone who made the original!
Link to original: https://www.thingiverse.com/thing:1740441