Thingiverse
Configurable bed or bunk bed by Enely
by Thingiverse
Last crawled date: 4 years, 7 months ago
Bunk bed compatible with Playmobil or Sylvanian Families. Included three variants of the bed. They are exactly the same except that one has a paw print (my printed version), one has a heart and one has nothing. Goes well with: https://www.thingiverse.com/thing:3167037
Make as many beds and legs you like and create the highest bed ever seen :)
No supports are needed for printing any of the parts.
Everything fit's together so you can build the beds however you want, but these are suggested build instructions:
4 legs
1 bed
4 legs
1 bed
Knobs and ladder
or
4 legs
1 bed + 4 legs already attached on top. This bed will then has to be the lower bunk but you gain stability.
1 bed + knobs already attached. This bed then has to be the top bunk but you reduce the number of prints you need to do and make sure the knobs don't fall off and get lost.
Visit my blog at: Enely's 3D
Make as many beds and legs you like and create the highest bed ever seen :)
No supports are needed for printing any of the parts.
Everything fit's together so you can build the beds however you want, but these are suggested build instructions:
4 legs
1 bed
4 legs
1 bed
Knobs and ladder
or
4 legs
1 bed + 4 legs already attached on top. This bed will then has to be the lower bunk but you gain stability.
1 bed + knobs already attached. This bed then has to be the top bunk but you reduce the number of prints you need to do and make sure the knobs don't fall off and get lost.
Visit my blog at: Enely's 3D