Thingiverse
Comscanner from "The Orville" by Shipbrook
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a replica of the comscanner prop from "The Orville".
NOTE: This model requires non-printed parts to complete - at the very least, a small sheet of clear polycarbonate or acrylic; however, it's intended to be a functioning hand prop with a spring-loaded scanner screen and LEDs to light both screens. This is not a model you can print, pull off the bed, and display without doing at least some post-printing work and assembly.
Included in the files are a piece that can be used to make a holster for the comscanner (for cosplay purposes), and a wall-mountable display bracket (designed for use with 3M Command strips).
Parts list for a full build:
Small sheet of 2.4mm thick clear polycarbonate (e.g. Lexan) or acrylic (e.g. Plexiglas)
Sheet of laser-printer transparency film (0.11mm thick)
Compression spring, 0.5mm wire, 7.3mm OD, 12mm long
Compression spring, 0.66mm wire, 6.4mm OD, 267mm long (e.g. https://tinyurl.com/y9oast5q)
Six (6) bright white LEDs, 5mm diameter, ~3V, 20mA (e.g. https://www.amazon.com/gp/product/B071GQMLBX/)
1-ohm resistor, 5% tolerance
330-ohm resistor, 5% tolerance
Gikfun Micro Switch, long hinge lever, part #EK1713 (e.g. https://www.amazon.com/gp/product/B015W8S8NA)
A27 battery
Wire
Small sheet of thin copper or brass (to make battery contacts)
Paint, metallic, light (Alclad II Dark Aluminum, Rustoleum Universal Titanium Silver, etc.)
Paint, metallic, dark (Alclad II Steel, Rustoleum Universal Black Stainless Steel, etc.)
Small sheet of black felt (self-adhesive recommended)
Soldering iron
Resin-core solder
2-part clear epoxy, fast-set (e.g. JB Weld ClearWeld)
For holster (optional):
8 Chicago screws (screw rivets), 1/4" length. (e.g. https://www.amazon.com/gp/product/B078V6NB14/)
Leather, 8 to 10 ounce (or synthetic equivalent), 3" by 12"
Belt (e.g. https://www.amazon.com/gp/product/B01N5W7200/)
Threadlock (optional)
Black felt (optional)
Leather punch
For wall mount bracket (optional):
1 pair of medium 3M Command Strips
NOTE: This model requires non-printed parts to complete - at the very least, a small sheet of clear polycarbonate or acrylic; however, it's intended to be a functioning hand prop with a spring-loaded scanner screen and LEDs to light both screens. This is not a model you can print, pull off the bed, and display without doing at least some post-printing work and assembly.
Included in the files are a piece that can be used to make a holster for the comscanner (for cosplay purposes), and a wall-mountable display bracket (designed for use with 3M Command strips).
Parts list for a full build:
Small sheet of 2.4mm thick clear polycarbonate (e.g. Lexan) or acrylic (e.g. Plexiglas)
Sheet of laser-printer transparency film (0.11mm thick)
Compression spring, 0.5mm wire, 7.3mm OD, 12mm long
Compression spring, 0.66mm wire, 6.4mm OD, 267mm long (e.g. https://tinyurl.com/y9oast5q)
Six (6) bright white LEDs, 5mm diameter, ~3V, 20mA (e.g. https://www.amazon.com/gp/product/B071GQMLBX/)
1-ohm resistor, 5% tolerance
330-ohm resistor, 5% tolerance
Gikfun Micro Switch, long hinge lever, part #EK1713 (e.g. https://www.amazon.com/gp/product/B015W8S8NA)
A27 battery
Wire
Small sheet of thin copper or brass (to make battery contacts)
Paint, metallic, light (Alclad II Dark Aluminum, Rustoleum Universal Titanium Silver, etc.)
Paint, metallic, dark (Alclad II Steel, Rustoleum Universal Black Stainless Steel, etc.)
Small sheet of black felt (self-adhesive recommended)
Soldering iron
Resin-core solder
2-part clear epoxy, fast-set (e.g. JB Weld ClearWeld)
For holster (optional):
8 Chicago screws (screw rivets), 1/4" length. (e.g. https://www.amazon.com/gp/product/B078V6NB14/)
Leather, 8 to 10 ounce (or synthetic equivalent), 3" by 12"
Belt (e.g. https://www.amazon.com/gp/product/B01N5W7200/)
Threadlock (optional)
Black felt (optional)
Leather punch
For wall mount bracket (optional):
1 pair of medium 3M Command Strips
Similar models
3dwarehouse
free
Compression spring .240 OD x .500 long
...compression spring .240 od x .500 long
3dwarehouse
coil spring compression spring .240 diameter x .50 long
thingiverse
free
M3D Crane Quad Fusion Wire Harness V2
... 3m nut and 2 - 12mm screws.
2 small zip ties to hold the wire in place.
screws/nuts https://www.amazon.com/gp/product/b075qkqgtd
3dwarehouse
free
spring, compression, 3 inch, 0.438 OD, 0.047 wire dia., McMaster-Carr 1986K111
...h, 0.438 od, 0.047 wire dia., mcmaster-carr 1986k111 #0047_wire_dia #0438_od #1986k111 #3_inch #compression #mcmastercarr #spring
3dwarehouse
free
spring, compression, 1 inch, 0.313 OD, 0.029 wire dia., McMaster-Carr 8969T4
..., 0.029 wire dia., mcmaster-carr 8969t4
3dwarehouse
spring, compression, 1 inch, 0.313 od, 0.029 wire dia., mcmaster-carr 8969t4
3dwarehouse
free
spring, compression, 1 inch, 0.156 OD, 0.016 wire dia., McMaster-Carr 8969T1
..., 0.016 wire dia., mcmaster-carr 8969t1
3dwarehouse
spring, compression, 1 inch, 0.156 od, 0.016 wire dia., mcmaster-carr 8969t1
thingiverse
free
Spring 1.0 Long,.156 OD, .028 Wire Diameter by I_Dont_Even_Know
...spring 1.0 long,.156 od, .028 wire diameter by i_dont_even_know
thingiverse
spring 1.0 long,.156 od, .028 wire diameter
grabcad
free
SW Configurable 3D Printer Extruder Spring, 8mm OD, .035"Wire
...ter extruder spring, 8mm od, .035"wire
grabcad
not perfect, cad lite, compression spring solidworks 2019. educational file.
thingiverse
free
BB-8 Head with LEDs by falconman
...t-jewelry-making/dp/b00qv3zag4
6mm x 3mm magnets (so the batteries can be replaced): https://www.amazon.com/gp/product/b01mxwmf7q
thingiverse
free
G43 holster by RustyElectronics
...tch version, got mine on amazon https://www.amazon.com/gp/product/b08kqk1zl6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=utf8&psc=1
thingiverse
free
Raspberry PI 3 case with LCD & Battery by katascope
...ww.amazon.com/gp/product/b01n7andlc
keyboard : https://www.amazon.com/iclever-portable-keyboard-bluetooth-wireless/dp/b00ywljnpq/
Shipbrook
thingiverse
free
The Orville - Sleeve Device by Shipbrook
... - sleeve device by shipbrook
thingiverse
reproduction of the small device worn on the left arm on the uniform from the orville.
thingiverse
free
Display Stand for TOS Phaser by Shipbrook by UnimatrixRed
...brook here: https://www.thingiverse.com/thing:3322199
the small tag is like the one in the photo which i used a .25mm nozzle for.
thingiverse
free
The Least Useful Thing on Thingiverse by Shipbrook
...iverse by shipbrook
thingiverse
the "remember me" checkbox from the thingiverse login page.
you had one job, checkbox!
thingiverse
free
UPDATE: The Orville - Sleeve Device (orig by Shipbrook)
...g by shipbrook)
thingiverse
reproduction of the small communication device worn on the left arm of the uniform from the orville.
thingiverse
free
Modified Parts and Stand for Varon-T Disruptor by Shipbrook by UnimatrixRed
...odified parts--the rest of the model's parts can be downloaded from shipbrook here: https://www.thingiverse.com/thing:2628536
thingiverse
free
Varon-T Disruptor by Shipbrook
... but you can own the fifth!
(reproduction of the prop from the star trek: the next generation episode "the most toys".)
thingiverse
free
Mask Pleater by Shipbrook
...k-alternative/
but it may be useful with other pleated designs as well.
see the video below for a demonstration of how to use it.
thingiverse
free
The Orville - Division Insignias by Shipbrook
...cal, slightly above the build plate (even a millimeter is fine), with raft and supports.
(1 march 2018 - added science insignia.)
thingiverse
free
Suffragetto game pieces by Shipbrook
...rinted or painted green, representing the suffragettes, and half should be printed or painted dark blue, representing the police.
thingiverse
free
The Next Doctor's Sonic Screwdriver by Shipbrook
...frame] ...that's sonic, isn't it?")
no sonic screwdriver collection is truly complete without the next doctor's!
Orville
3d_export
$175
1903 Wright Flyer 3D Model
...model 3dexport aircraft 1903 wright flyer dayton ohio brother orville wilbur flight aviation kitty hawk history plane historic biplane...
thingiverse
free
Orville Command Insignia by magiczztab
...ille command insignia by magiczztab
thingiverse
this is a printable insignia like the one warn by seth on the show the orville.
thingiverse
free
The Orville Badges by NBennie
...nd, engineering, medical, and security. i will be adding updated models with holes for magnets and also a back plate for magnets.
thingiverse
free
The Orville - Sleeve Device by Shipbrook
... - sleeve device by shipbrook
thingiverse
reproduction of the small device worn on the left arm on the uniform from the orville.
thingiverse
free
'The Orville' Security Badge by MontagueFlange
...orville' security badge by montagueflange
thingiverse
the orville security badge. same as the comm badge really for printing
thingiverse
free
Orville The Piggybank by neobobkrause
...rthy fellow. whether 3d printed or assembled from laser-cut slices, he can be counted on to keep your savings organized and safe.
thingiverse
free
The Orville Captain Epaulets by Hairy43
...the scale to 125% for male costumes.
note: these models were based on the excellent work by shipbrook, also here on thingverse.
thingiverse
free
The Orville Admiral Epaulets by Hairy43
... the scale to 125% for male costumes.
note: these models were based on the excellent work by shipbrook, also here on thingverse.
thingiverse
free
Orville Data Pad by Steve757
...verse
this a working version of the glowing data pad used on the orville. it uses 3d printed parts and 1/4 inch thick plexyglas
thingiverse
free
USS Orville by 863jsarts
...uss orville by 863jsarts
thingiverse
this part is 3d printable hope you enjoy