Thingiverse
Compact drill bit stand 1mm to 10 mm by gustavoale
by Thingiverse
Last crawled date: 4 years, 7 months ago
A compact drill bit stand for 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm and 10mm drill bits.
With all the drill bits the stand is balanced, even if you tilt it will come back to the base position.
I personally printed with the worst layer thickness I had available (0.28mm) with 20% infill.
The holes have an additional of 0.5mm in diameter due to inner circle retraction experienced in most printers. The design is not parametric but you can easily edit it.
With all the drill bits the stand is balanced, even if you tilt it will come back to the base position.
I personally printed with the worst layer thickness I had available (0.28mm) with 20% infill.
The holes have an additional of 0.5mm in diameter due to inner circle retraction experienced in most printers. The design is not parametric but you can easily edit it.