Thingiverse
Coinbox-Lock by FabianFriethjoph
by Thingiverse
Last crawled date: 3 years, 3 months ago
For a christmas present, I made a coin vault. But I needed a simple lock that would fit into the 40mm hole my Fresnel drill could make. So, I designed this. After a first print, I thickened the outer ring radially and also increased the thicknesses some. Since pulling out was a little bit tricky, the locking piece's peg was given a "waist" to give a better grip in the last version.
After printing, a little bit of filing to smooth the locking lugs of the disk and... voila! a simple but effective lock that can be set into a standard hole and prevent coins from escaping.
After printing, a little bit of filing to smooth the locking lugs of the disk and... voila! a simple but effective lock that can be set into a standard hole and prevent coins from escaping.
Similar models
thingiverse
free
Simple coin lock by LolloTheMaker
...e opened/closed.
paste the "hole" to your model and use the other part as cap to open/close (and why not using a coin).
thingiverse
free
Microwave lock hook - remix by KDima
...uot; .
changed a little source design.
also added hole in pins.
after printing put piece of filament (with glue) inside the hole.
thingiverse
free
Printrbot Simple y-lock redesigned by CaptKirk
...ade the latch stronger, added the printrbot logo, and added a second mount hole giving you positioning choices. hope you like it.
thingiverse
free
Tap Drill Handle by EranT
... and clicks into place. the m3 hole needs to be tapped.
i've printed a couple of these and tested them on pla and abs parts.
thingiverse
free
Smart Wallet - Diferent Lock by Motion_0112
...r.
the lid files with "_lt" at the name, have less tolerance at the lock. print if your wallet doesn't stay closed.
thingiverse
free
Train Whistle by Ostronic13
...ronic13
thingiverse
after printing, insert reeds into the holes in the whistle. (they may need to be trimmed down a little bit.)
thingiverse
free
Bit Holder Pegboard Bracket
...tacts the print bed and turn on basic supports and all you will need to do is remove some small supports under the mounting pegs.
thingiverse
free
Walkera Devo 10 battery door
...nce they come out a bit too little .i pringed it with tree supports but it could be printed with normal supports.happy flying !!!
thingiverse
free
Bit "Maker" Coin by Nilltan
...bit "maker" coin by nilltan
thingiverse
a bit "maker" coin.
grabcad
free
Locking Shower Curtain Ring With Printed Hinge
...
printed with pla, 15% gyroid infill.
one piece, little or no cleanup required.
breaks free after a bit of wiggling / flexing.
Fabianfriethjoph
thingiverse
free
20x20x20mm Test Cube by FabianFriethjoph
..., 1.2 mm, walls, and a pair of resin-escape holes in the z-cover, and a little air intake hole on the x sides to prevent cupping.
thingiverse
free
Dummyhead for modeling by FabianFriethjoph
...pe to work with that is easily adjusted to your head. this was made in fusion360 to allow such by simply altering the parameters.
thingiverse
free
Von Koch Snowflake by FabianFriethjoph
...h of the sides of the resulting star, turning this into a snowflaky object. in this case, there are 4 repetitions of this proces.
thingiverse
free
Harmonograph by FabianFriethjoph
...lorful art. in higher classes the same object could be used in its original idea: as an example of a dampened harmonic oscilator.
thingiverse
free
Tronxy X1 X-Axis adjustabel slider by 3D_Dane
...even i printet the closefit one. i still use fabianfriethjophs on the side closest to the screw heads, and...
thingiverse
free
Tronxy X1 radial fan mount and nozzle. by fessyfoo
...this. all credit goes to: it's the mount from fabianfriethjoph https://www.thingiverse.com/thing:2330698/#files and the nozzle from louiscooper https://www.thingiverse.com/thing:2184575 also i...
thingiverse
free
TronXY X1 Hotend Adapter for 12V Fan by FabianFriethjoph
...uts has to be pressed into the holes first, then a pair of m3 in 20mm or longer can grab them and provide good hold on the block.
thingiverse
free
Slider for 2040 Openbuilds v-cut by FabianFriethjoph
...ng, that the walls of the threaded variant can bend a bit while cutting the thread, all variants were updated with thicker walls.
thingiverse
free
TronXY X1 Electronics Box LCD Cover by FabianFriethjoph
...ronxy x1.
2 variants: single piece & split into a tronxy x1 printable set of two with a 30mm overlap and grooves for the glue
Coinbox
thingiverse
free
Subaru Forester SG coinbox
...ter sg coinbox
thingiverse
it's a coinbox that fits in the middle console - the console with a hatch underneath the armrest.
thingiverse
free
Piggybank (3D Printable) by eflite
...piggybank (3d printable) by eflite thingiverse 3d-printable piggybank (coinbox. printed on an ultimaker2 in pla with 0.1mm layer...
thingiverse
free
CoinBox by simmarith
...d to get some sort of spring to put in there behind the coins. nothing smaller than a 10 cents/bigger than 2 € will fit in there.
thingiverse
free
box/coinbox with modifications by lackaffchen
...e stützmaterial
schachtelmaße:
höhe = 150 mm;
weite = 50 mm;
tiefe = 100 mm;
stärke = 3 mm;
handle muss an die box geklebt werden
thingiverse
free
Coinbox by djdj111
...coinbox by djdj111
thingiverse
conbox 40x50x30mm
thingiverse
free
CoinBox for Festival Coins by Nastjaaa
... most common square coins from festival's.
after you print it, you can melt the inside part and add a spring for easier use.
thingiverse
free
Coin Bank
...to open it gently push it again into the coinbox then take the door from inside. if you pull...
thingiverse
free
Isle of Skye Organizer with Expansions by paprika_dash
...you own druids, print 1x druidtiles and 1x tabletbox. coinbox was originally for the 10s coins and the other...
grabcad
free
Coinbox ship - internal storage compartment for coins
...that looks like a miniature ship. internal coin storage compartment of said ship. manufacture would probably require 3d printing.
Lock
3d_export
$64
Lion Head Door Knocker 3D Model
...decoration bronze gate handle brass ornate antique stone sculpture lock cat big statue game ready low lion head door...
3d_export
$50
Library Screws Bolts DIN 912 ISO 4762 AutoCAD 2010 3D Model
...iso 4762 bolt bolts screws nuts nut screw washers lock grover hardware fasteners anchors anchor library screws bolts din...
3d_export
$10
Wizards Magic Key 3D Model
...key toon gold cartoon magic fantasy wizard skeleton lock unlock wizards magic key 3d model trinity23 28785...
3d_ocean
$2
Key
...key 3docean door key lock open unlock a key facecount: 617 (2x subsurfed:...
3d_export
$15
Treasure Chest 3D Model
...classic antique ancient old western gold furniture marriage dowry lock trunk treasure chest 3d model download .c4d .max .obj...
3d_export
$10
Locker V2 3D Model
...al padlock indoor security middle
locker v2 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 113155 3dexport
3ddd
$1
Двери
...models of modern doors of my design, fully detailed, lock, hinges, screws yet light size...
3ddd
$1
Poltrona Frau JOBS
...second drawer accessible from the inside, and a key lock on the outer side. the front of the drawer...
3ddd
$1
Door Lock
...door lock
3ddd
замок
hotel airbnb lock touch screen password door lock mf card key lever handle
3ddd
$1
Duravit Mirrorwall MW 9834
...http://www.duravit.com/website/homepage/products/product_overview/series/mirrorwall.com-en.html/p-108955 mirrorwall mirrorwall 4 mirror doors (below including pressure lock, 1 double mirror door including 12 detachable wooden boxes,...