Thingiverse
Coffee Grinder Automation by zanthor
by Thingiverse
Last crawled date: 3 years, 1 month ago
https://youtu.be/9uZRwW8AOLE
So I bought a coffee grinder and discovered I'm far too lazy to grind my coffee by hand... but the coffee is AMAZING when ground by hand...
So... I bought a servo... and modified it to spin forever... (I centered the pot, then cut the nob off it... and ground the gear stop off the gear...)
And I printed a thing... and I used a cheap servo tester to drive this, I suppose if I got fancy I'd program an Arduino Nano to generate the PWM signal I want for a specific amount of time necessary to grind my coffee...
I power it with a USB wall charger... I tested it off a powered USB hub and it seemed fine, but I'd be concerned about amp draw.
M3x26 bolts to hold it on the coffee grinder, M3x8 bolts to hold the servo in... you'll need an M3 tap.
So I bought a coffee grinder and discovered I'm far too lazy to grind my coffee by hand... but the coffee is AMAZING when ground by hand...
So... I bought a servo... and modified it to spin forever... (I centered the pot, then cut the nob off it... and ground the gear stop off the gear...)
And I printed a thing... and I used a cheap servo tester to drive this, I suppose if I got fancy I'd program an Arduino Nano to generate the PWM signal I want for a specific amount of time necessary to grind my coffee...
I power it with a USB wall charger... I tested it off a powered USB hub and it seemed fine, but I'd be concerned about amp draw.
M3x26 bolts to hold it on the coffee grinder, M3x8 bolts to hold the servo in... you'll need an M3 tap.
Similar models
thingiverse
free
Convert a hand coffee grinder into a battery powered one by fastkite
...than my 110v ac powered grinder. it also lets me grind specific weights of coffee bean more easily than with my regular grinder.
thingiverse
free
Solis Typ166 / Severin KM3873 Coffee Grinder gear by ErkanBeyaz
...nd this maskes its gear more prone to wear. i have learned this fact after a long continous grind resulted the loss of this gear.
thingiverse
free
JavaPresse Coffee Grinder Holder by GuidoVermicelli
...take the stress out of my morning grind. after some trial and error, i came up with this and so far i'm pretty happy with it.
thingiverse
free
Espresso Funnel
... the transport step, so i designed this funnel to fit inside the filter and help keep as much of the grinds inside the container.
thingiverse
free
Coffee Grinder Catcher by jonle
... the portafilter and the grounds bin often leaves a mess of grinds on the counter, so i made a little catcher to reduce the mess.
thingiverse
free
3D printed gearbox for coffee grinder by GAFonseca
... of an old hand blender and made a new case that is more anatomic and doesn't need screws, since i'll hold it while using
thingiverse
free
-65.46:1 Compound Planetary Gearbox for Coffee Grinder by H9419
...;. doubled the gripping surface and added a locking mechanism that is modeled after one of the proper attachments of the blender.
thingiverse
free
Ground coffee container for AKA Electric MWM 3 Kaffeemühle (Coffe Grinder) by SparkyCola
...ich still works very well and more quietly than one 21st century electric coffee grinder they bought and used before i made this.
thingiverse
free
Hand crank coffee burr grinder bushing by haimiko
...ushing by haimiko
thingiverse
the bushing on my hand crank coffee grinder kept breaking so i decided to make these out of nylon.
grabcad
free
coffee bean grinder
...coffee bean grinder
grabcad
hand powered coffee bean grinder
Zanthor
thingiverse
free
RC Plane Bungee Launch Hook by zanthor
...r
thingiverse
glue this to the bottom of your aircraft for use with bungee launch systems. need it bigger? scale the model :d.
thingiverse
free
rx5808-pro-diversity Case by zanthor
...that tupor designed, specifically designed for v1.0 rev 4. there are multiple arduino pro mini pinouts so you may need to tweak.
thingiverse
free
BLTouch Mount for Flexion E3D by zanthor
...d work with pretty much anything.
offsets are roughly as below:
x_probe_offset_from_extruder -25
y_probe_offset_from_extruder -29
thingiverse
free
Mini Drak Skid by zanthor
...es more organic, added glue swales in the bottom of it... ok, so there's not a lot to compare with such a simple part.
enjoy!
thingiverse
free
Taz5 BLTouch Mount by zanthor
...ide of your extruder to anchor this. i ran the bolt through the original nut and then captured the bltouch mount with a 2nd nut.
thingiverse
free
Transmitter Kickstand by zanthor
...protects my tbs crossfire when folded or kicked out.
vertical carbons are 120mm
top horizontal is 95mm
bottom horizontal is 85mm
thingiverse
free
Ram Air Scoop by zanthor
...p of the coro so you don't leave ugly edges behind. i printed out of taulman 910 nylon and used goop to stick them in place.
thingiverse
free
Ritewing Mini Drak LED Clamshell by zanthor
... so... in the end i settled on putting these pulsing led's under a clamshell that serves as a diffuser in front of the motor.
thingiverse
free
Taranis Antenna Hack Adapter by zanthor
... place...
remove the stock antenna, insert a bulkhead rp-sma connector in this print, and secure to the top with welder adhesive.
thingiverse
free
RX5808 Pro Diversity Bracket by zanthor
...have a printer, i have these for sale on my site (http://www.twistedquads.com/rx5808-pro-diversity-mounting-bracket_p_2602.html).
Grinder
3d_export
$7
belt grinder
...belt grinder
3dexport
belt grinder
archibase_planet
free
Coffee grinder
... planet
coffee-grinder coffee grinder kitchen ware
coffee grinder n030510 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$1
Grinder
...turbosquid
royalty free 3d model grinder for download as c4d on turbosquid: 3d models for games, architecture, videos. (1408552)
turbosquid
$10
Grinder
...
royalty free 3d model grinder for download as , fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1568436)
turbosquid
$25
Grinder
...yalty free 3d model grinder for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1508433)
turbosquid
$5
Grinder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Grinder
... 3d model grinder for download as c4d, obj, fbx, dae, and 3ds on turbosquid: 3d models for games, architecture, videos. (1603976)
3d_ocean
$14
Meat grinders
...eat grinders
3docean
kitchen meat grinders tools
this is little meat grinders with an old design, 1960-1980, made in 3ds max 2008
archibase_planet
free
Coffee grinder
...ase planet
coffee-grinder kitchen equipment
coffee grinder gipfel n270810 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Grinder 3D Model
...
coffee-grinder grinder
grinder n120108 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Automation
turbosquid
$19
Automation for gates
... model automation for gates for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1600153)
turbosquid
$5
Automated Teller Machine
...tomated teller machine for download as c4d, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1677841)
turbosquid
$30
AUTOMATED GUARD STATION
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$19
Drink Automate New
...w office old red retro rust soda store vending vintage
old rusty drink machine, and new shiny. xsi and lvo exported from blender.
evermotion
$10
home automation system 32 am95
...ion system with all textures, shaders and materials.
it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
home automation system 35 am95
...ion system with all textures, shaders and materials.
it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
home automation system 38 am95
...ion system with all textures, shaders and materials.
it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
home automation system 24 am95
...ion system with all textures, shaders and materials.
it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
home automation system 30 am95
...ion system with all textures, shaders and materials.
it is ready to use, just put it into your scene.. evermotion 3d models shop.
evermotion
$10
home automation system 27 am95
...ion system with all textures, shaders and materials.
it is ready to use, just put it into your scene.. evermotion 3d models shop.
Coffee
archibase_planet
free
Coffee
...e planet
coffee iced coffee coffee drink cold coffee
coffee drink n170614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Coffee
... planet
coffee packet of coffee pack of coffee
packet of coffee 1 n190614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
coffee
...coffee
3dexport
coffee
3d_export
$5
coffee
...coffee
3dexport
cartoon cup of coffee
3ddd
free
Coffee
...coffee
3ddd
кофе , книга
coffee, book
archibase_planet
free
Coffee
...coffee
archibase planet
coffee black coffee
nescafe n091007 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Coffee Table
...e table
3ddd
coffee , table , wood
coffee table
archibase_planet
free
Coffee mill
...base planet
coffee mill coffee-grinder coffee grinder
coffee mill n200515 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Coffee mill
...base planet
coffee mill coffee-grinder coffee grinder
coffee mill n300111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$2
Starbucks coffee
...starbucks coffee
3docean
coffee starbucks
a high quality starbucks coffee.