Thingiverse
Coffee Cup Holder and Universal Mount by in_the_garage
by Thingiverse
Last crawled date: 4 years, 4 months ago
I've updated this design and moved over to youmagine.com https://www.youmagine.com/designs/coffee-cup-holder enjoy!
A simple adjustable cup holder that can be mounted on any round bars about 30mm in diameter. Fits cups for a common coffee cup size but will hold other shaped liquid containers too.
I printed mine in ColorFabb XT because I was worried about the heat. I haven't tested it in PLA - I cut holes in the design to help keep the plastic cool and beefed some parts up so it should be OK.
Required Hardware:
4X #8 bolts 2" long (may vary due to mounting bar diameter)
4X #8 nuts
1X #8 bolt 1" long
A simple adjustable cup holder that can be mounted on any round bars about 30mm in diameter. Fits cups for a common coffee cup size but will hold other shaped liquid containers too.
I printed mine in ColorFabb XT because I was worried about the heat. I haven't tested it in PLA - I cut holes in the design to help keep the plastic cool and beefed some parts up so it should be OK.
Required Hardware:
4X #8 bolts 2" long (may vary due to mounting bar diameter)
4X #8 nuts
1X #8 bolt 1" long