Thingiverse
Codenames Grid, Laser Cut by kap42
by Thingiverse
Last crawled date: 4 years, 5 months ago
A laser-cut grid layout for Codenames and/or Codenames Duet, that makes it easier to get a nice 5 x 5 grid, and to keep it in place during play. Cutouts and holes make it easy to remove/flip the cards. Works well with sleeved cards.
It can be used with only the front part, which is then placed directly on the gaming table. But, for the best result cut both parts and glue them together. I made mine from 3 mm MDF, and glued the parts together with ordinary wood glue.
Cutting Instructions
Red lines should be cut through.
Blue lines should cut about halfway through.
Green should be engraved.
Support My Work
Should you want to, you can support me at Patreon. If you are unable to become a patron, remember that likes are free and they make designers happy! :-)
On Patreon, it is also possible to get a commercial license for my designs.
It can be used with only the front part, which is then placed directly on the gaming table. But, for the best result cut both parts and glue them together. I made mine from 3 mm MDF, and glued the parts together with ordinary wood glue.
Cutting Instructions
Red lines should be cut through.
Blue lines should cut about halfway through.
Green should be engraved.
Support My Work
Should you want to, you can support me at Patreon. If you are unable to become a patron, remember that likes are free and they make designers happy! :-)
On Patreon, it is also possible to get a commercial license for my designs.