Thingiverse
cnc1419 "on steroids"
by Thingiverse
Last crawled date: 4 years, 2 months ago
All you need to transform a weak china-cnc into a little Monster.
Mount for a 43mm (Eurohals) spindle motor. My choice turned out to be an AMB (former Kress) 530 fm.
With the printed/acrylic motor mount, I was able to machine this new holder out of 10mm aluminium within tolerances of 0.02mm :).
The printed holder held up pretty well so far, but with the aluminium mount, i can now machine quite a bit faster, ( up to 500mm/min with an 5mm 4-flute endmill in aluminium).
Mount for a 43mm (Eurohals) spindle motor. My choice turned out to be an AMB (former Kress) 530 fm.
With the printed/acrylic motor mount, I was able to machine this new holder out of 10mm aluminium within tolerances of 0.02mm :).
The printed holder held up pretty well so far, but with the aluminium mount, i can now machine quite a bit faster, ( up to 500mm/min with an 5mm 4-flute endmill in aluminium).
Similar models
grabcad
free
UAV, Drone Motor Mount T-Motor 3508
...unt
i sourced the model of the motor for reference purposes from here: https://grabcad.com/library/tiger-mn3508-brushless-motor-1
thingiverse
free
Battery Base For Motorised Marble Machine by rcdon
...chine. thanks to all of the makers that helped to inspire this design and thanks for looking at my contribution to thingiverse!!!
thingiverse
free
Athearn DCC Circuit Board/Motherboard Holder (TCS) by nstrains10
...side of the motherboard to motor piece. should then slide over top of motor. i am using this to hold my tcs motherboard in place.
thingiverse
free
motor mount for singer 784 sewing machine by wawatoma
...r singer 784 sewing machine by wawatoma
thingiverse
i needed to fix my sewing machine so i 3d printed the 3 motor mount i needed
thingiverse
free
Aluminium Bar Quad Motor Mount by plexer
...for the motor mounts and as the spacing needs to be enlarged slightly for 20mm versus 3/4" aluminium square bar i made this.
thingiverse
free
Spindle Speed Controller Mount Holder by GofX
...the 400w "bldc motor driver" to misumi 2020 extrusion aluminium or any other place you like
add some m3 screws and nuts
thingiverse
free
3dlabprint Stearman pt-17 Motor mount by ChunkyChubbs
... to the engine block as well, so the motor mount bracket would fit, and the prop adapter could protrude out the end. see photos.
thingiverse
free
Reptile Dragon 1200 Motor mount holder by mfoo
...or mount.
apply some glue (e6000) and push the holder in.
we do highly suggest to rip the motor mount off and re-glue completely.
thingiverse
free
Artillery Sidewinder X1 - BTT TFT 3.5 v3.0 Mount Another Base
...mount holes are 84x49 mm. and i removed the sd card holder. i'm using it with oceany's "tft35-frontcover.stl" .
thingiverse
free
ELS Project Brackets by Gadjet0
... and printed an adapter to fit it to the shaft of the encoder.
please make sure these parts fit your parts before you print them!
Steroids
thingiverse
free
SHARKZ with steroids by MuuSer
...sharkz with steroids by muuser
thingiverse
picture tells more than thousands of words...
added improved one...
thingiverse
free
Warrior on steroid sword by Helix6187
... grim dark futur.
i made them for the fisty and knighty boy of one of my friend.
please share your print if you ever print them.
thingiverse
free
bench, benchy's steroid addicted cousin
...ed hydroplane cousin.
might need some support for the spoiler, i need to make a few changes to the model so it can print without.
thingiverse
free
Printrbot on Steroids by LXDickman
...r fixed (no more hole in the gear mesh, thicker at the set screw), be careful on the shells on the large gear(hollow teeth= bad))
thingiverse
free
SATSANA ON STEROIDS - BONDTECH - BMG - DIRECT DRIVE -EXTRUDER by MrSonyx3DPrint
...e details
capricorn tube length on my ender 3 with stock hotend is 92mm
feel free to ask me any questions about it.
happy printig
thingiverse
free
Cobblebot Vanguard Remix on Steroids
...t app--the free web version is quite limited in the tools that are available, and the precision isn't as tight as other apps.
thingiverse
free
PrintrPlate - Printrbot Full Build Tray (On Steroids) by sponnet
...way from the corners of your build platform , to avoid bumping into clipses at the corners of your glass plate if you have one...
thingiverse
free
Thunderbolt Starfury variant by Mike1701
...thunderbolt starfury variant by mike1701 thingiverse a starfury on steroids it can even go planetside! (grabbed from 3d warehouse...
thingiverse
free
Mount for Eachine Pro58 module for Eachine VR D2 goggles
...thingiverse you can read more about the upgrade on: http://lll.mk/fpv/eachine-pro58-boxed-goggles-on-steroids ...