CNC Router Clamp V2 by Droneme

Last crawled date: 4 years, 6 months ago

Another version of a CNC Router Clamp. It is designed for 1/4in. T-Nuts or Inserts in your waste board. I use 1/4in. all-thread for the pivot post and a 3in x 1/4in. bolt for the other. This version has smaller thumb screws and has a foot for the end bolt to protect your waste board. I printed the clamp at .2 layer thickness and 50% infill the other parts are printed at .3 layer thickness and 10% infill.