Thingiverse
CNC 3018 Pro - Wasteboard & Clamps
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is the wasteboard I've made for may 3018 CNC Router.
I used a 12mm MDF for this. Added some 4mm blind nuts and attached it to the aluminum base with 4mm screws also.
Attached to this are some 3d printed clamps and hold downs.
All screws and nuts are 4mm.
As pictured, I've added a wire to one of the clamps, this way I can use the Z height probe easily on PCBs.
To make the wasteboard I asked a friend with a big router to cut some 12mm MDF in 300x180mm blocks and the rest I did it myself for the fun of it.
Bottom side of the wasteboard
Waste Board - Bot - Blind Nuts - Holes.svg - Holes for the clamp screws
Waste Board - Bot - Blind Nuts - Recess.svg - Recess for the blind nuts
Top Side of the wasteboard
Waste Board - Top - Hold Down - Holes.svg - Holes for the screws that hold the wasteboard to the aluminum base.
Waste Board - Top - Hold Down - Recess.svg - Recess for the screw heads. Measure the screw head height and add 1mm to it so the screw will be at least 1mm lower than the surface.
Waste Board - Top - Guides.svg - Simple engraved guides 10mm spaced. I've done this with a V-bit at 0.4 deep pass.
######################################################################
Please check all measures and positions of the holes before drilling and carving the MDF
######################################################################
There are many 3018 on the market and they are not identical. These measures worked for me and "may" or "may not" work for you, so please check against your aluminum bed before carving and drilling the MDF.
My Router is this one: https://pt.aliexpress.com/item/32918305989.html?spm=a2g1y.12024536.productList_11474571.pic_4
I've published a collection of "upgrades" I've done on my router, it's available here: https://www.thingiverse.com/thing:3291676
Please enjoy!
If you like my work please consider supporting it.
I used a 12mm MDF for this. Added some 4mm blind nuts and attached it to the aluminum base with 4mm screws also.
Attached to this are some 3d printed clamps and hold downs.
All screws and nuts are 4mm.
As pictured, I've added a wire to one of the clamps, this way I can use the Z height probe easily on PCBs.
To make the wasteboard I asked a friend with a big router to cut some 12mm MDF in 300x180mm blocks and the rest I did it myself for the fun of it.
Bottom side of the wasteboard
Waste Board - Bot - Blind Nuts - Holes.svg - Holes for the clamp screws
Waste Board - Bot - Blind Nuts - Recess.svg - Recess for the blind nuts
Top Side of the wasteboard
Waste Board - Top - Hold Down - Holes.svg - Holes for the screws that hold the wasteboard to the aluminum base.
Waste Board - Top - Hold Down - Recess.svg - Recess for the screw heads. Measure the screw head height and add 1mm to it so the screw will be at least 1mm lower than the surface.
Waste Board - Top - Guides.svg - Simple engraved guides 10mm spaced. I've done this with a V-bit at 0.4 deep pass.
######################################################################
Please check all measures and positions of the holes before drilling and carving the MDF
######################################################################
There are many 3018 on the market and they are not identical. These measures worked for me and "may" or "may not" work for you, so please check against your aluminum bed before carving and drilling the MDF.
My Router is this one: https://pt.aliexpress.com/item/32918305989.html?spm=a2g1y.12024536.productList_11474571.pic_4
I've published a collection of "upgrades" I've done on my router, it's available here: https://www.thingiverse.com/thing:3291676
Please enjoy!
If you like my work please consider supporting it.
Similar models
grabcad
free
Shapeoko 3 XXL Factory Wasteboard With holes
...waste board with holes setup 2.5" apart and preset holes for factory screws. the t-nut drilling is setup for 1/4"x20.
grabcad
free
3018 CNC - Spoil board (waste board) upgrade
...w very easily and with the nut's integrated in the setup, it's also very convenient to secure the stocks on the platform.
thingiverse
free
Clamp by BeerPercussion
...clamp by beerpercussion
thingiverse
clamp for holding down board on router table
for 3mm, 6mm and 18mm board
thingiverse
free
Sacrificial board for 3018 CNC Router by DzikuVx
...r the left side and once for the right side
you can use 3d printed vise to hold the mdf https://www.thingiverse.com/thing:4780357
thingiverse
free
Clamping system for MPCNC or similar by pavel569
...n reaching 7mm i pause and insert steel nut and continue printing.
nut 2 has hole through for inserting steel nut after printing.
thingiverse
free
Stepped Block and Step Clamp Arm for CNC3040 by Parkournerd
...is a tradeoff to maximize the range of heights accommodated.
enjoy and as always, feel free to comment if you have any questions.
grabcad
free
3018 pro cnc clamp and waste board / spoil board
...from mihn diy on on grabcad (mihn's man cave on youtube) it mounts directly to the stock aluminum table. it uses m6 hardware.
thingiverse
free
MKS Mini-b V1.0 support for 2020 extrusions by PixelPicker
...upport; then i've fixed the whole thing on the 2020 extrusion with m4x6mm screws and 4mm t-nuts.
i recommend abs to print it.
thingiverse
free
Frame to hold workpiece on a DIY CNC Router by lechge
...s in the 4 corner (m4 x 30) are used t6o level the frame. the two big screws with the wing nut hold the frame on the routers bed.
thingiverse
free
CNC table hold downs by bradmc
...up to 1" thick material. you need one lock part per hold-down. print the locks upside down (with the tips pointed upward).
Wasteboard
thingiverse
free
Wasteboard clamp for X-carve
...wasteboard clamp for x-carve
thingiverse
wasteboard clamp for x-carve ( and other cnc)
dust boot friendly
for use with m5 screw
thingiverse
free
Shapeoko 3 Wasteboard Workholding by clockfort
...en flipped the wasteboard around so that it was right-side-up, and then recessed the holes a bit for the preexisting screw holes.
thingiverse
free
CNC 3018 Wasteboard Holder Clips
... them for my correct profile. i kept the nut insets to 10mm so they were tight and then heated the nuts to slide them into place.
thingiverse
free
Trinus 3D Laser Wasteboard clips by 3dnoobie
...protect your expensive hpb with some cheap material before you risk damaging it. print 3 and place them as shown in the picture.
thingiverse
free
Wasteboard for Nomad 883 Pro CNC by miho
...push them from the top of the vice into the nut hole. the uploaded stl/step files are tested with an ultimaker 3 extended @0.2mm.
thingiverse
free
Inventables Carvey Wasteboard
...can add your own.
this was taken from the model linked in the carvey fusion 360 video https://www.youtube.com/watch?v=iqnvzxuxftq
thingiverse
free
AR15 Engraving Jig For Shapeoko W Myers Wasteboard by ChrisVZ
...the myers' wasteboard for the shapeoko.
updated on 6/1/21. hole spacing was just a bit off, so i edited them to correct it.
thingiverse
free
Snapmaker 2.0 wasteboard holder by bigwhizkid3
...screws from the heated bed and get a longer screw to go through the waste board and heated bed to secure it to the base platform.
thingiverse
free
Router template for edge slots in X-Carve wasteboard by sprior
...o support needed, 20% infill is fine. i had to sand some bumps off the inside, but once i did that the bushing fit like a glove.
3018
3d_export
$5
Cartoon Black Bus Car
...triangulated for the game engine. total number of polygons: 3018 ...
thingiverse
free
CNC 3018 by Assomer
...cnc 3018 by assomer
thingiverse
accessoire pour cnc diy 3018
3dfindit
free
3017, 3018
...3017, 3018
3dfind.it
catalog: 80/20
thingiverse
free
aspiration 3018
...rse
support pour brosse aspiration fraiseuse 3018
la brosse fait 69x43 mm
brosse ancien aspirateur je ne connais plus la marque
thingiverse
free
CNC 3018 rod mount
...cnc 3018 rod mount
thingiverse
rod mount for cnc 3018.
thingiverse
free
Outillage CNC 3018 Pro
...outillage cnc 3018 pro
thingiverse
ranger vos principaux outils cnc 3018 pro
thingiverse
free
CNC 3018 Calibrator by digital_technology_factory
...cnc 3018 calibrator by digital_technology_factory
thingiverse
this is a part to calibrate the rods of the z axis of the cnc 3018
thingiverse
free
CNC 3018 Dremel Mount
...d.com/custlink/vvdv4y6oc6https://amzn.to/2bjkmil
dremel 3000https://amzn.to/36bt4f9
(affiliate links! if you want to support me.)
thingiverse
free
CNC 3018 Clamp protection
...lamp protection
thingiverse
designed to protect the aluminium of the cnc 3018 and protect the wood
with a little power it fits.
thingiverse
free
CNC 3018 tools organizer
...cnc 3018 tools organizer
thingiverse
this is a tools organizer for my cnc 3018 that i designed.
feel free to use.
Clamps
3d_export
$11
clamp
...clamp
3dexport
clamp
3ddd
free
Clamp
... enricо zanolla , капитоне
дизайнерenrico zanollмодель clamp
3ddd
$1
Clamp
...ricо zanolla , капитоне
дизайнеры
enrico zanolla
andrea di filippo
модель clamp
dzstudio
3d_export
free
clamp
...clamp
3dexport
simple clamp model, more free 3d models here:
3d_export
$5
clamping handle
...clamping handle
3dexport
clamping handle
3ddd
$1
Clamp / DZstudio
... dzstudio , капитоне
люстра clamp от dzstudio/enrico zanolla(италия).
3ddd
$1
Светильник Clamp
...светильник clamp
3ddd
clamp
стеганый светильник clamp в двух цветах в черном и белом.
turbosquid
$29
clamp
...ty free 3d model clamp for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442049)
turbosquid
$29
clamp
...ty free 3d model clamp for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1442041)
3d_export
$5
Clamp-14
...clamp-14
3dexport
3d model of clamp name 14
Cnc
3d_export
$35
Cnc
...cnc
3dexport
the cnc machine is unfinished
3d_export
$10
cnc router
...cnc router
3dexport
prototipe cnc router
3d_export
$10
cnc machine
...cnc machine
3dexport
cnc machine model with individual model files with assembly
3d_export
$5
Cnc 3D Model
...cnc 3d model
3dexport
cnc
cnc 3d model csiszar 61289 3dexport
turbosquid
$10
cnc bedroom
...osquid
royalty free 3d model cnc bedroom for download as max on turbosquid: 3d models for games, architecture, videos. (1494981)
turbosquid
$9
cnc(wood)
...rbosquid
royalty free 3d model cnc(wood) for download as max on turbosquid: 3d models for games, architecture, videos. (1189189)
turbosquid
$1
CNC Frame
...rbosquid
royalty free 3d model cnc frame for download as stl on turbosquid: 3d models for games, architecture, videos. (1371706)
turbosquid
free
cnc table
...rbosquid
royalty free 3d model cnc table for download as max on turbosquid: 3d models for games, architecture, videos. (1500926)
turbosquid
$30
CNC Lathe
...
royalty free 3d model cnc lathe for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1284634)
turbosquid
$25
CNC Machine
...
royalty free 3d model cnc machine for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1307199)
Pro
turbosquid
$29
Pro
...ree 3d model mac pro for download as obj, c4d, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1505782)
turbosquid
$15
Apple Mac Pro and Pro Display
...ee 3d model apple mac pro and pro display for download as max on turbosquid: 3d models for games, architecture, videos. (1417078)
3d_export
$5
iphone 13 pro max and pro
...3 pro max and 13 pro the model is made in four colors (graphite, gold, silver, and blue), all of which are attached in the files.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
3d_export
$4
macbook pro
...macbook pro
3dexport
macbook pro 13" inch 2020 years model
3ddd
free
GentleLase Pro
... syneron , candela
gentlelase pro аппарат для лазерной эпиляции
turbosquid
$25
PRO frame
...rbosquid
royalty free 3d model pro frame for download as max on turbosquid: 3d models for games, architecture, videos. (1148329)
turbosquid
$5
Alien pro
...osquid
royalty free 3d model alien pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1678446)
turbosquid
$5
iphone11 pro
...uid
royalty free 3d model iphone11 pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1562707)
3ddd
$1
Mac Pro (appel)
...mac pro (appel)
3ddd
компьютер , apple
mac pro