Thingiverse
Clutch Pedal Pad by TheHippMaker
by Thingiverse
Last crawled date: 4 years, 7 months ago
Push in the clutch, turn the ignition... and nothing happens. This is what happened to my 1998 Toyota corolla manual transmission. After testing the battery and the starter I finally figured out through a friend that I needed to hit my clutch pedal position sensor every time I start up the car. When I took a look under my dash I noticed every time I would push the clutch in the clutch pedal position sensor would go through a hole on my clutch pedal. It wouldn't depress so it wouldn't be activated. So I figured out I needed a clutch pedal position pad.
Here is the final product. It's a pretty snug fit but that is how I wanted it, so it wouldn't move
I used PLA, however, I will change it to ABS because I live in a warm climate and I want it last through high heat.
clutchpedalpad #manualtransmission
Here is the final product. It's a pretty snug fit but that is how I wanted it, so it wouldn't move
I used PLA, however, I will change it to ABS because I live in a warm climate and I want it last through high heat.
clutchpedalpad #manualtransmission