Thingiverse
Clothespin Note/Bill Holder by mostly_harmless
by Thingiverse
Last crawled date: 4 years, 3 months ago
Make a TEST CLOTHESPIN (2 pcs) to check that your clothespin springs will work with this. Mine did not. I had to edit it to make adjustments.
I used MatthewSt's Heart Clothespin. https://www.thingiverse.com/thing:48267
I took the half without the heart & used that to make both halves of a basic clothespin. Then I had to edit that to fit my clothespin springs. Is this a REMIX?
I added teeth to it, so it is 2 different pieces. The teeth mesh together for better grip.
Then I made the 3 pin piece. It is the LOWER piece. The 3 halves you attach to them are UPPER pcs.
This was made to use "3M command strips" to attach it to my dry erase wall.
"medium refill strips" - 9MM - size 3 lb / 1.3 kg.
My springs came from WalMart's Mainstays brand wooden clothespins.
made in Tinkercad.
You can use .3mm layers but it will look better with .15mm layers.
75% infill. you could probably use less.
I use 1.2 mm wall thickness
support? maybe, maybe not. it's a narrow slot to bridge.
If you make the one with screw holes I would suggest using thicker walls for more strength around the holes.
I only printed the one with command strips.
I used MatthewSt's Heart Clothespin. https://www.thingiverse.com/thing:48267
I took the half without the heart & used that to make both halves of a basic clothespin. Then I had to edit that to fit my clothespin springs. Is this a REMIX?
I added teeth to it, so it is 2 different pieces. The teeth mesh together for better grip.
Then I made the 3 pin piece. It is the LOWER piece. The 3 halves you attach to them are UPPER pcs.
This was made to use "3M command strips" to attach it to my dry erase wall.
"medium refill strips" - 9MM - size 3 lb / 1.3 kg.
My springs came from WalMart's Mainstays brand wooden clothespins.
made in Tinkercad.
You can use .3mm layers but it will look better with .15mm layers.
75% infill. you could probably use less.
I use 1.2 mm wall thickness
support? maybe, maybe not. it's a narrow slot to bridge.
If you make the one with screw holes I would suggest using thicker walls for more strength around the holes.
I only printed the one with command strips.