Thingiverse
CloneBoard Mini Interface Case by Raffle
by Thingiverse
Last crawled date: 4 years, 1 month ago
Designed to complement the CloneBoard Mini's Interface Panel, this 3D printable case also protects the interface panel's electronics.
The CloneBoard Mini Interface has a 20×4 LCD with manual contrast adjustment, full size SD card reader, speaker, error indicating LEDs and 5-button navigation.
The interface panel is designed to connect to the CloneBoard Mini - an Atmel 2560 based – Sailfish Firmware compatible controller board which uses the same form factor as the Melzi. The CloneBoard Mini controls a single 3D printer extruder as well as X, Y and Z axes using digipot controlled stepper drivers.
The supplied STLs should be easy to print without support material.
The CloneBoard Mini Interface has a 20×4 LCD with manual contrast adjustment, full size SD card reader, speaker, error indicating LEDs and 5-button navigation.
The interface panel is designed to connect to the CloneBoard Mini - an Atmel 2560 based – Sailfish Firmware compatible controller board which uses the same form factor as the Melzi. The CloneBoard Mini controls a single 3D printer extruder as well as X, Y and Z axes using digipot controlled stepper drivers.
The supplied STLs should be easy to print without support material.