Thingiverse
Clone PanelDue 7 housing for 2020 extrusion.
by Thingiverse
Last crawled date: 5 years, 2 months ago
I needed a nice clean housing to mount my clone PanelDue 7 on the top rail of my coreXY printer.
I was going to design from scratch as nothing was available luckily I found was a nice case made by zx82net which included the Fusion files, So I tweaked hes design slightly for my needs (Saved me loads of time!)
This is for the Chinese clone of the Paneldue 7 which has the LCD panel mount holes with spacing of 102mm x 175mm and the separate Panel Due v3 control board.
Changes I made to the original design are:-
-Removed pattern from the front of case
-Removed SD card slot
-Added port for speaker sound
-Removed nut hex and shortened the screen mount to allow fitment to 2020 with T-Nuts
I was going to design from scratch as nothing was available luckily I found was a nice case made by zx82net which included the Fusion files, So I tweaked hes design slightly for my needs (Saved me loads of time!)
This is for the Chinese clone of the Paneldue 7 which has the LCD panel mount holes with spacing of 102mm x 175mm and the separate Panel Due v3 control board.
Changes I made to the original design are:-
-Removed pattern from the front of case
-Removed SD card slot
-Added port for speaker sound
-Removed nut hex and shortened the screen mount to allow fitment to 2020 with T-Nuts