Thingiverse
![Clodbuster beadlock wheel for SCX10 by mfink70](/previews/8289999.jpg)
Clodbuster beadlock wheel for SCX10 by mfink70
by Thingiverse
Last crawled date: 3 years, 1 month ago
I made a few changes from the source files, made the inner beadlock a little heavier duty, lengthened the inner and outer wheels, put a Dodge logo on the hubcaps and put the wheels together with bolts. 25% infill should be fine.
I used 4 M3 45mm bolts to bolt the wheels together. The M3 nuts will fit into the inner wheel and I attached the wheel to the wheel extensions using a M4 45mm bolt.
Here's a link to the wheel extensions I used, they fit perfectly
https://www.amazon.com/Hot-Racing-SLF10Y08-Aluminum-Extension/dp/B00XF8G9ZO/ref=sr_1_1?ie=UTF8&qid=1532192912&sr=8-1&keywords=slf10y08
I used 4 M3 45mm bolts to bolt the wheels together. The M3 nuts will fit into the inner wheel and I attached the wheel to the wheel extensions using a M4 45mm bolt.
Here's a link to the wheel extensions I used, they fit perfectly
https://www.amazon.com/Hot-Racing-SLF10Y08-Aluminum-Extension/dp/B00XF8G9ZO/ref=sr_1_1?ie=UTF8&qid=1532192912&sr=8-1&keywords=slf10y08
Similar models
thingiverse
free
![RC 2.2 Beadlock wheel](/t/4663106.jpg)
RC 2.2 Beadlock wheel
... removed the supports from the inner & outter rings, i left the flange surface rough. it keeps the tire from slipping better.
thingiverse
free
![1.9 beadlock crawler wheel for RC by angrysquirrel](/t/8626620.jpg)
1.9 beadlock crawler wheel for RC by angrysquirrel
...wheel for rc by angrysquirrel
thingiverse
made some new shoes for my scx10. 3 piece, used 10mm m3 screws to hold them together.
thingiverse
free
![Tamiya Grasshopper II Wheels V2.0 (no glue) by Nivekkeke](/t/8099234.jpg)
Tamiya Grasshopper II Wheels V2.0 (no glue) by Nivekkeke
...r
pneu_grasshoper_sand_v2.0 (45mm width rim)
or
pneu_grasshoper_sand (45mm width rim)
or
pneu_grasshoper_offroad (40mm width rim)
thingiverse
free
![Tamiya Grasshopper II - Wheels V2.0 (no glue needed) by Nivekkeke](/t/8176689.jpg)
Tamiya Grasshopper II - Wheels V2.0 (no glue needed) by Nivekkeke
...r
pneu_grasshoper_sand_v2.0 (45mm width rim)
or
pneu_grasshoper_sand (45mm width rim)
or
pneu_grasshoper_offroad (40mm width rim)
grabcad
free
![BFG T/A ON METHOD WHEEL BEADLOCK](/t/1889881.jpg)
BFG T/A ON METHOD WHEEL BEADLOCK
...beadlock
grabcad
used tire and wheel model from grabcad and mated together
had to change some sizing on the tire to make it fit.
grabcad
free
![Tire & Wheel, Nitto Trail Grappler 40x13.50R17 & TrailReady Beadlock 17x10](/t/2951365.jpg)
Tire & Wheel, Nitto Trail Grappler 40x13.50R17 & TrailReady Beadlock 17x10
...ock 17x10
grabcad
tire & wheel, nitto trail grappler 40x13.50r17 & trailready beadlock 17x10, 8 bolt on 6.5" b.c.d.
thingiverse
free
![WPL Teardrop Beadlock Wheel by the_law_man01](/t/8274961.jpg)
WPL Teardrop Beadlock Wheel by the_law_man01
...r at your disposal and would like a set of wheels, contact me.
thank you and enjoy.
update 09/25/2018:
made the inner ring wider.
thingiverse
free
![Joystick extension for drone remote](/t/4803976.jpg)
Joystick extension for drone remote
...t;distance bolts m3" with a max length of 35mm.
simply put the distance bolts in the joystick extension.
have fun with it :)
thingiverse
free
![R/C Plane Skids by ThatSlacker](/t/8757653.jpg)
R/C Plane Skids by ThatSlacker
... field. so i put together landing skids instead.
the slots are the right size for coat hanger wire and the holes fit an m3 bolt.
thingiverse
free
![V groove bearing pully by deltapenguin](/t/8848098.jpg)
V groove bearing pully by deltapenguin
...ing on the support using m3x15 bolt and one m3 nut.
the v groove wheel should turn without rubbing the inner wall of the support.
Mfink70
thingiverse
free
![Monoprice Mini misc. files by mfink70](/t/8540639.jpg)
Monoprice Mini misc. files by mfink70
...s by mfink70
thingiverse
a few designs i made for my own mini for the dual z motor setup. modify as needed.
infill is up to you.
thingiverse
free
![Lead Screw Adapter Da Vinci by mfink70](/t/8669544.jpg)
Lead Screw Adapter Da Vinci by mfink70
... up with a different bracket for the z end stop as this bracket may interfere with the factory bracket.
tested and works perfect!
thingiverse
free
![Axial SCX10 ESC Box by mfink70](/t/8645046.jpg)
Axial SCX10 ESC Box by mfink70
... esc today and it was a bit tight. added a second enclosure box that i trimmed back the screw mounts to allow for more clearance.
thingiverse
free
![Monoprice Select Mini Z-Stabilizer 6mm bearing bracket and cap by mfink70](/t/8698098.jpg)
Monoprice Select Mini Z-Stabilizer 6mm bearing bracket and cap by mfink70
...cap for monoprice select mini. must drill the screw holes to attach the bearing cap to the x-axis bracket.
infill is up to you.
thingiverse
free
![MPSM Extruder box with Fan by mfink70](/t/8646277.jpg)
MPSM Extruder box with Fan by mfink70
...nfig file it still got a bit too warm for me.
infill is up to you, 25% or better is probably good enough.
i used a 40 x 20mm fan.
thingiverse
free
![Monoprice Select Mini MKS 3.2" LCD full enclosure with lid by mfink70](/t/8682594.jpg)
Monoprice Select Mini MKS 3.2" LCD full enclosure with lid by mfink70
...ieboard conversion. must drill holes to attach lid to enclosure.
i mounted this all the way to the left even with the side plate.
thingiverse
free
![Da Vinci MKS Sbase smoothieboard and mosfet mount by mfink70](/t/8640593.jpg)
Da Vinci MKS Sbase smoothieboard and mosfet mount by mfink70
... needed to the mount. i also ended up lengthening it a bit.
great mount! saved a ton of time. thanks go to the original designer!
thingiverse
free
![Monoprice Mini Delta Effector / Mount by mfink70](/t/8668798.jpg)
Monoprice Mini Delta Effector / Mount by mfink70
... e3d v6 to keep it from sliding in the mount. this will locate the bottom of the e3d v6 heatsink with the bottom of the effector.
thingiverse
free
![Monoprice mini X-Axis end cap by mfink70](/t/8695426.jpg)
Monoprice mini X-Axis end cap by mfink70
...id another test print, alignment clip fits perfect now, i think i'm satisfied.
again infill is up to you.
thanks for looking!
Clodbuster
thingiverse
free
![Tamiya Clodbuster Hood Scoop by io3oo3](/t/8908562.jpg)
Tamiya Clodbuster Hood Scoop by io3oo3
...tamiya clodbuster hood scoop by io3oo3
thingiverse
replacement hood scoop for tamiya 1/10 scale clodbuster rc truck.
thingiverse
free
![Clodbuster rear body mounts by moonguar](/t/9684689.jpg)
Clodbuster rear body mounts by moonguar
...uar
thingiverse
these mounts are designed almost exactly as the original rear body mounts for the tamiya clodbuster stock truck.
thingiverse
free
![Clodbuster switch blanks by Beige](/t/8243753.jpg)
Clodbuster switch blanks by Beige
...n the clodbuster or bullhead chassis, useful to tidy up the appearance of a lightly modified truck.
https://youtu.be/tkorf2-1nvi
thingiverse
free
![Clodbuster Servo Mounting Plate by plaroach](/t/8358631.jpg)
Clodbuster Servo Mounting Plate by plaroach
...clodbuster servo mounting plate by plaroach
thingiverse
thingiverse
free
![Tamiya Clodbuster Roll Bar Supports by io3oo3](/t/8908566.jpg)
Tamiya Clodbuster Roll Bar Supports by io3oo3
...tamiya clodbuster roll bar supports by io3oo3
thingiverse
tamiya clodbuster 1/10 scale rc truck roll bar supports.
thingiverse
free
![clodbuster axle guard by drommon](/t/8263351.jpg)
clodbuster axle guard by drommon
... cool! assembly is very simple just need 4@ 3x12mm screws and 2@ 3x35mm screws (per axle skid) bolts right on like the pics show.
thingiverse
free
![Clodbuster Beadlock by binary_0](/t/8743262.jpg)
Clodbuster Beadlock by binary_0
... on my 2.2 - 5 star beadlock design (http://www.thingiverse.com/thing:2066905)
this thing is currently setup with a 12mm hex hub.
thingiverse
free
![Clodbuster front bumper adapter by TEiAM](/t/8228964.jpg)
Clodbuster front bumper adapter by TEiAM
...clodbuster front bumper adapter by teiam
thingiverse
use m2x10mm screws and washers for mounting
thingiverse
free
![Clodbuster Rear Lock Out by shadowfocus603](/t/8098041.jpg)
Clodbuster Rear Lock Out by shadowfocus603
...ckles side to side and run it lower. i like the way shown because it has better ground clearance. printed at 100% infill at 215c.
thingiverse
free
![Clodbuster battery slot blanks by Beige](/t/8243752.jpg)
Clodbuster battery slot blanks by Beige
...y these blanks neatly cover up the big holes in the chassis and provide mounts for on/off switches.
https://youtu.be/tkorf2-1nvi
Beadlock
turbosquid
$8
![Crawler tyre with beadlock rims](/t/13247870.jpg)
Crawler tyre with beadlock rims
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$129
![2021 ford-bronco 4-door 2-door](/t/11464404.jpg)
2021 ford-bronco 4-door 2-door
...the standard sasquatch package: 35-inch tires wrapped around 17-inch beadlockcapable wheels, position-sensitive monotube shocks. outside, badlands comes with removable...
thingiverse
free
![1.9 Beadlock wheel](/t/4686094.jpg)
1.9 Beadlock wheel
...1.9 beadlock wheel
thingiverse
shape the beadlock ring into iron.
free3d
$20
![OEM TOYOTA BEADLOCK](/t/8209390.jpg)
OEM TOYOTA BEADLOCK
...oem toyota beadlock
free3d
oem toyota with beadlock bead lock off road wheels steel bolts
thingiverse
free
![Rancher 4x4 beadlock rim](/t/4867948.jpg)
Rancher 4x4 beadlock rim
...rancher 4x4 beadlock rim
thingiverse
3 pieces beadlock rim for project rancher 4x4
thingiverse
free
![1.9 Beadlock Ring by Damion1](/t/8182431.jpg)
1.9 Beadlock Ring by Damion1
...1.9 beadlock ring by damion1
thingiverse
just a basic beadlock ring with a 6 hole bolt pattern.
thingiverse
free
![Kamaz Master 1.9 Beadlock](/t/4703756.jpg)
Kamaz Master 1.9 Beadlock
...kamaz master 1.9 beadlock
thingiverse
1.9 beadlock.
uses 8mm m3 screws.
+3mm offset.
thingiverse
free
![1/8 Beadlock wheel by Yrban](/t/8655765.jpg)
1/8 Beadlock wheel by Yrban
...1/8 beadlock wheel by yrban
thingiverse
1/8 beadlock for proline masher tires
thingiverse
free
![Clodbuster Beadlock by binary_0](/t/8743262.jpg)
Clodbuster Beadlock by binary_0
... on my 2.2 - 5 star beadlock design (http://www.thingiverse.com/thing:2066905)
this thing is currently setup with a 12mm hex hub.
thingiverse
free
![Beadlock crawler wheels by NXT3DRC](/t/8199184.jpg)
Beadlock crawler wheels by NXT3DRC
...s by nxt3drc
thingiverse
two part beadlock wheels with integrated disc brakes.
based on a popular 4x4 wheel type...
post a make!
Scx10
thingiverse
free
![wheels for SCX10 by Cnegon](/t/8754049.jpg)
wheels for SCX10 by Cnegon
...wheels for scx10 by cnegon
thingiverse
wheels for scx10
thingiverse
free
![High Clearance Crawler Front Bumper - SCX10, SCX10 II by Robskii](/t/8345372.jpg)
High Clearance Crawler Front Bumper - SCX10, SCX10 II by Robskii
...nce crawler front bumper - scx10, scx10 ii by robskii
thingiverse
direct bolt-on front bumper for either your scx10 or scx10 ii.
thingiverse
free
![SCX10 Türgriff by MonoDani](/t/8613483.jpg)
SCX10 Türgriff by MonoDani
...scx10 türgriff by monodani
thingiverse
türgriffe für den scx10.
drucken.. bohren.. kleben..
thingiverse
free
![Front Bumper SCX10 by Breksys](/t/8615437.jpg)
Front Bumper SCX10 by Breksys
...front bumper scx10 by breksys
thingiverse
scx10 front bumper
fits on axial scx10 deadbolt. printed and tested.
thingiverse
free
![SCX10 / SCX10 II Dual Servo Mount by Robskii](/t/8341645.jpg)
SCX10 / SCX10 II Dual Servo Mount by Robskii
...ervo mount by robskii
thingiverse
cross brace to allow for dual servos to be mounted.
-requires cms
-requires battery relocation
thingiverse
free
![Box SCX10 and Other by HappyMaker06](/t/8191419.jpg)
Box SCX10 and Other by HappyMaker06
...box scx10 and other by happymaker06
thingiverse
box for scx10 and other...
top, bottom, and cover for battery.
thingiverse
free
![axial scx10 bumper by KyleDietrich](/t/8746543.jpg)
axial scx10 bumper by KyleDietrich
...axial scx10 bumper by kyledietrich
thingiverse
fits axial scx10 power wagon, possibly other models
thingiverse
free
![Axial SCX10 parts by robertl49](/t/8748156.jpg)
Axial SCX10 parts by robertl49
...axial scx10 parts by robertl49
thingiverse
axial scx10 dingo parts
radiator
drivers floor
center console
thingiverse
free
![SCX10 Flex and Work Stand by Dungstar](/t/8572783.jpg)
SCX10 Flex and Work Stand by Dungstar
...scx10 flex and work stand by dungstar
thingiverse
scx10 flex and work stand
thingiverse
free
![SCX10 hilux truggy grill by imperfect927](/t/8655792.jpg)
SCX10 hilux truggy grill by imperfect927
...scx10 hilux truggy grill by imperfect927
thingiverse
scx10 hilux truggy grill
Wheel
archibase_planet
free
![Wheel](/t/951375.jpg)
Wheel
...l steering control steering wheel
wheel ship steering wheel n060215 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_ocean
$14
![Wheel](/t/586031.jpg)
Wheel
...wheel
3docean
car rim car wheel rim wheel
high poly car wheel design. 16,840 polys
3d_export
free
![wheel](/t/11418727.jpg)
wheel
...wheel
3dexport
wheel
3d_export
free
![wheel](/t/11447097.jpg)
wheel
...wheel
3dexport
wheel
3d_export
free
![Wheel](/t/11378549.jpg)
Wheel
...wheel
3dexport
wheel
3d_export
$5
![wheel](/t/11387641.jpg)
wheel
...wheel
3dexport
wheel for car.
3d_export
$5
![wheel](/t/11697063.jpg)
wheel
...wheel
3dexport
car wheel
3d_export
$5
![wheel](/t/11697349.jpg)
wheel
...wheel
3dexport
car wheel
3d_export
$5
![wheel](/t/11697316.jpg)
wheel
...wheel
3dexport
car wheel
3d_export
$5
![wheel](/t/11697782.jpg)
wheel
...wheel
3dexport
car wheel