Thingiverse
Clip-On Wandhalterung / Wallmount LoraWAN Gateway Dragino LG02 by axel_ch
by Thingiverse
Last crawled date: 4 years, 2 months ago
Are you into IoT and are you using the LoraWAN Gateway LG02 from Dragino?https://www.dragino.com/products/lora-lorawan-gateway/item/135-lg02.html
Then you might noticed, that it is not too simple to position the two screws for mounting correctly - especially when it is mounted on a place difficult to reach.
I skeched up a simple Clip-on Wallmount that can be attached with two screws that you can see during mounting.
Mine is under the roof between the spars and difficult to reach. After attaching the Wallmount switch on the Gateway and attach the cables and snap it into the mount.
Then you might noticed, that it is not too simple to position the two screws for mounting correctly - especially when it is mounted on a place difficult to reach.
I skeched up a simple Clip-on Wallmount that can be attached with two screws that you can see during mounting.
Mine is under the roof between the spars and difficult to reach. After attaching the Wallmount switch on the Gateway and attach the cables and snap it into the mount.