Thingiverse
clip-on Filamentguide, Ender3 V2 by Toberl
by Thingiverse
Last crawled date: 4 years, 4 months ago
Filament guide, without screwing, for clip-on.
The guide can be slid sideways over the sheet metal and clips into the final position on the outer edge of the bronze screw.
The guide is designed "exactly to size", so it fits quite tightly. Therefore, shrinkage correction should be taken into account when printing.
With PETG, I have perfect dimensions on my ender with 0.8% correction - but that depends on your material (manufacturer specifications usually come quite close to reality), the printing parameters and your hardware...
In PLA, the lower clips are not elastic enough and can break off - I just cut them off right away, the guide still holds very stable.
The guide can be slid sideways over the sheet metal and clips into the final position on the outer edge of the bronze screw.
The guide is designed "exactly to size", so it fits quite tightly. Therefore, shrinkage correction should be taken into account when printing.
With PETG, I have perfect dimensions on my ender with 0.8% correction - but that depends on your material (manufacturer specifications usually come quite close to reality), the printing parameters and your hardware...
In PLA, the lower clips are not elastic enough and can break off - I just cut them off right away, the guide still holds very stable.