Thingiverse
Clean Dishes, Dishes Dirty, dishwasher sliding sign by Jimbotron
by Thingiverse
Last crawled date: 3 years, 1 month ago
(Update: 4/25/2018 - I added a blank version part A and B so you can cut or stick your own words. Thanks to TurtleKid for the suggestion.)
This is a sliding Clean/Dirty Dishes sign for your dishwasher.
Instructions:
*If you have been 3d Printing for a while - you are probably ok without these instructions for changing colors to make "Clean" Green, "Dirty" Red, "Dishes" Black, and the body silver. However, read on if in doubt and feel free to comment if you need clarification/help.
Start "Clean_Dirty_Sign_Parta01.STL" with green filament or whatever color you want for "Clean"
As soon as you start to see the sidewall edges form for the word "clean" on the left, which indicates that the word clean's last layer is finished, then change the color to red for the word "Dirty"- Change From Green to Red at or between 2.6mm to 2.8mm
When the red word Dirty is complete, you will see the sidewall edges form around the word "Dirty", and that tells you it is time to change to Silver to complete the print.- Change from Red to Silver at or between 3.3mm to 3.5mm
In the slicer orient "Clean_Dirty_Sign_Partb01.STL" with the word "Dishes" at the bottom by rotating on the X axis 180 degrees.
*Optionally, (advanced) print with Dishes facing upwards with support material as originally oriented - adjust color change as needed.
Start printing the "Clean_Dirty_Sign_Partb01.STL" with the color Silver and change to Black after about 3 to 4 layers at 0.2 layer resolution or 5-6 layers at 0.15 resolution so that the word "Dishes" is Black and finish the part in Black.- Change from Silver to Black at or between 1.4mm and 1.6mm
Post Printing:
Glue three 10mmx1.5mm magnets in the three recessed holes on the back. Cover with masking tape and trim so you don't scratch your dishwasher with the magnets. 10mm with 1mm thickness would be fine also - like these: https://www.amazon.com/MosShop-Refrigerator-Magnets-50pcs-10mmX1mm/dp/B07176K33G/ref=sr_1_9?ie=UTF8&qid=1524023465&sr=8-9&keywords=10mm+magnets
Break a magnet in half (or optionally use whole magnet) and paste the parts on the inside of part B (the "Dishes" part) next to each side wall as depicted in the picture of the Black part. Before you glue, check your polarity with the main part for magnetic attraction to the "Clean" and "Dirty" sides of the part A. You can snap the two parts together to check this.
Snap Part A to Part B and place it on your dishwasher. If the magnets are causing repulsion such that the slide does not snap to clean and dirty then reorient the magnets on Part B.
This is a sliding Clean/Dirty Dishes sign for your dishwasher.
Instructions:
*If you have been 3d Printing for a while - you are probably ok without these instructions for changing colors to make "Clean" Green, "Dirty" Red, "Dishes" Black, and the body silver. However, read on if in doubt and feel free to comment if you need clarification/help.
Start "Clean_Dirty_Sign_Parta01.STL" with green filament or whatever color you want for "Clean"
As soon as you start to see the sidewall edges form for the word "clean" on the left, which indicates that the word clean's last layer is finished, then change the color to red for the word "Dirty"- Change From Green to Red at or between 2.6mm to 2.8mm
When the red word Dirty is complete, you will see the sidewall edges form around the word "Dirty", and that tells you it is time to change to Silver to complete the print.- Change from Red to Silver at or between 3.3mm to 3.5mm
In the slicer orient "Clean_Dirty_Sign_Partb01.STL" with the word "Dishes" at the bottom by rotating on the X axis 180 degrees.
*Optionally, (advanced) print with Dishes facing upwards with support material as originally oriented - adjust color change as needed.
Start printing the "Clean_Dirty_Sign_Partb01.STL" with the color Silver and change to Black after about 3 to 4 layers at 0.2 layer resolution or 5-6 layers at 0.15 resolution so that the word "Dishes" is Black and finish the part in Black.- Change from Silver to Black at or between 1.4mm and 1.6mm
Post Printing:
Glue three 10mmx1.5mm magnets in the three recessed holes on the back. Cover with masking tape and trim so you don't scratch your dishwasher with the magnets. 10mm with 1mm thickness would be fine also - like these: https://www.amazon.com/MosShop-Refrigerator-Magnets-50pcs-10mmX1mm/dp/B07176K33G/ref=sr_1_9?ie=UTF8&qid=1524023465&sr=8-9&keywords=10mm+magnets
Break a magnet in half (or optionally use whole magnet) and paste the parts on the inside of part B (the "Dishes" part) next to each side wall as depicted in the picture of the Black part. Before you glue, check your polarity with the main part for magnetic attraction to the "Clean" and "Dirty" sides of the part A. You can snap the two parts together to check this.
Snap Part A to Part B and place it on your dishwasher. If the magnets are causing repulsion such that the slide does not snap to clean and dirty then reorient the magnets on Part B.
Similar models
thingiverse
free
Dishwasher Dirty/Clean sign with embedded magnets by kageurufu
...ough.
update: i added my source f3d, and a step export. i'm not great at fusion, so hopefully its easy enough to work with :)
thingiverse
free
Dishwasher magnet by Wunderboythe1st
... print uses a 19.5mm magnet that is press fit into the part. the color is changed by swapping the filament on the top few layers.
thingiverse
free
Sliding Word Dishwasher Sign with Staggered Layers for Letters
... part is 1mm.
i also made some magnet holders to use to stick to the dishwasher instead of suction cups. the magnets are 7mmx2mm
thingiverse
free
Clean/Dirty Reversible Dishwasher Status Magnet by sysimgrp
...er are clean or dirty. there are two files to print, a clean side and a dirty side. the sketchup file is included for download.
thingiverse
free
Dishwash indicator by uvens
...shers door and set to clean when you start the dishwashing . when the dish is removed from the machine, turn the knob to dirty.
thingiverse
free
Dishwasher clean-dirty sign
... assemble (put p1 onto p2 and close with p3, i secured it with glue)
i also painted the sign (p1) in green/red as in the picture.
thingiverse
free
print-in-place dishwasher sign clean/dirty by Printschnitzel
...had so far. designing this as an assembly might be better. but i find making things "print in place" very satisfying :)
thingiverse
free
Dishwasher Clean/Dirty Sign by MilkLife
...s inside are clean or dirty. mount using cutouts for .375x.060" magnets or double sided tape if dishwasher is not magnetic.
thingiverse
free
Sliding Dishwasher Sign magnetic
...w for only 1-2mm clearance from the dishwasher.
with this changes i think the amazing design of middlefingerboss is now complete.
thingiverse
free
Dishwasher Clean Dirty Sign by Coolkid171717
.... all i ask is that you do not sell my product, and if you make any changes, to give credit to me and link to this original page.
Jimbotron
thingiverse
free
PIral by Jimbotron
...piral by jimbotron
thingiverse
this is a π "pi" spiral for those who love π.
thingiverse
free
Japanese Doll Ornament by Jimbotron
...
thingiverse
this is a japanese doll ornament for my daughter and anyone else on thingiverse who wants to download and print it.
thingiverse
free
PI Pile or PI Flower? by Jimbotron
... a spiraling pile of pi that i did for fun - and for those who love pi
my daughter pointed out that it also works great as a top.
thingiverse
free
Spiral Shell Based on Fibonacci Spiral by Jimbotron
...al is inspired by the awesome fibonacci sequence and fibonacci spirals.
it is 6 spiral spokes extruded upward and rotated around.
thingiverse
free
EMF Wave / Test Print by Jimbotron
... with minimal sagging and stray strands.
this is a good print challenge if you want to show off your 3d printer tweaking skills.
thingiverse
free
Icebergs for penguins, models, and scenery by Jimbotron
... (clear) pla with no supports or raft needed. i suggest infill at 10%.
i'll try to post a clearer picture when time permits.
thingiverse
free
Twirling Fidget Toy by Jimbotron
...m still working on that) i made a neat little fidget toy that my kids love fiddling with so i'm sharing it with the community
thingiverse
free
Wacky Tree Fractal (WTFractal!) by Jimbotron
...o eventually get around to trying to print this. it will certainly need supports. i'll post pics and details once complete.
thingiverse
free
Grove Ultrasonic Ranger Servo Mount by Jimbotron
...ve or seeed sonic ranger - this is the mount for you.
the ...mount6 version is plain
the ...mount5 version has mouse ears for fun
thingiverse
free
Wearable Royal Crown by Jimbotron
... - use about 84 to 88% scale to shrink it down a bit. also, if your printer is limited to 200x200 use 93 or less scaling to fit.
Dishwasher
turbosquid
$5
dishwasher
...bosquid
royalty free 3d model dishwasher for download as fbx on turbosquid: 3d models for games, architecture, videos. (1450941)
turbosquid
$40
Dishwasher
...
royalty free 3d model dishwasher for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1613215)
turbosquid
$6
Dishwasher
...
royalty free 3d model dishwasher for download as dwg and dxf on turbosquid: 3d models for games, architecture, videos. (1644978)
archibase_planet
free
Dishwasher
...ishwasher
archibase planet
kitchen-range gas-stove cooker
rk dishwasher 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Dishwasher
...asher
archibase planet
kitchen range gas cooker gas stove
rk dishwasher 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$18
dishwasher
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Dishwasher
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Dishwasher
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Dishwasher
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$8
Dishwashing Brush
...modern dishwashing brush with green and orange material. cinema 4d model with vrayforc4d shader incl. format for fbx, obj and 3ds
Dirty
3d_export
$5
dirty laundry basket
...dirty laundry basket
3dexport
dirty laundry basket
turbosquid
$5
Dirty Knife
...urbosquid
royalty free 3d model dirty knife for download as on turbosquid: 3d models for games, architecture, videos. (1364122)
turbosquid
$5
Dirty cloth
...urbosquid
royalty free 3d model dirty cloth for download as on turbosquid: 3d models for games, architecture, videos. (1643845)
turbosquid
$2
Dirty Chair
...osquid
royalty free 3d model dirty chair for download as fbx on turbosquid: 3d models for games, architecture, videos. (1506779)
turbosquid
$2
Dirty Bed
...rbosquid
royalty free 3d model dirty bed for download as fbx on turbosquid: 3d models for games, architecture, videos. (1405475)
turbosquid
free
Dirty bed
...rbosquid
royalty free 3d model dirty bed for download as fbx on turbosquid: 3d models for games, architecture, videos. (1409239)
turbosquid
$15
Dirty Chandelier
...ty free 3d model dirty chandelier for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1258610)
3d_ocean
$3
Dirty tile
...docean
cracked diamond dirty old square texture tile
this tileable texture contains a normal map, speculer map, and a height map.
turbosquid
$7
Dirty tire
... free 3d model dirty tire for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1411277)
turbosquid
$4
Dirty tomb
...ty free 3d model dirty tomb for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1153868)
Dishes
archibase_planet
free
Dishes
...dishes
archibase planet
dishes crockery
dishes n050907 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Dish
...dish
archibase planet
dish ravioli food
dish with dumplings n280411 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Dish
...dish
archibase planet
petri dish laboratory ware
petri dish - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Dish
...dish
archibase planet
plate dish kitchen ware
dish n090508 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
free
Dish
...dish
turbosquid
free 3d model dish for download as blend on turbosquid: 3d models for games, architecture, videos. (1318919)
turbosquid
$5
Dish
...bosquid
royalty free 3d model national dish for download as on turbosquid: 3d models for games, architecture, videos. (1349574)
turbosquid
$1
Dish
...sh
turbosquid
royalty free 3d model dish for download as obj on turbosquid: 3d models for games, architecture, videos. (1555874)
turbosquid
$8
Dishes
...uid
royalty free 3d model dishes for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1279576)
turbosquid
$5
dish
...squid
royalty free 3d model dish for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1670080)
turbosquid
$5
dishes
...uid
royalty free 3d model dishes for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1274435)
Sliding
archibase_planet
free
Slide
...slide
archibase planet
slide playground chute
slide n040513 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Slide
...slide
archibase planet
slide playground chute
slide 1 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Slide
...slide
archibase planet
slide chute playground
slide 4 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Slide
...slide
archibase planet
slide playground chute
slide 3 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Slide
...slide
archibase planet
slide chute playground
slide 2 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Slide
...slide
archibase planet
slide swing playground swing seat
slide n100315 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Slide
...slide
archibase planet
slide swing playground
slide 1 playground n070915 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3ddd
$1
Childs slide
...childs slide
3ddd
childs slide , детская площадка
childs slide
3ddd
$1
Childs slide
...childs slide
3ddd
childs slide , детская площадка
childs slide
3ddd
$1
Childs slide
...childs slide
3ddd
childs slide , детская площадка
childs slide
Sign
archibase_planet
free
Sign
...sign
archibase planet
signboard sign mask
restroom sign - 3d model for interior 3d visualization.
turbosquid
$1
Street Signs Stop Sign
...alty free 3d model street signs stop sign for download as fbx on turbosquid: 3d models for games, architecture, videos. (1672592)
turbosquid
free
Signs for the zodiac signs pack
...signs pack for download as 3ds, obj, wrl, fbx, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1194807)
3d_ocean
$9
Road Signs
...road signs
3docean
outdoor road signs signpost waymark
road signs 3d models.
3d_export
$5
Biohazard sign
...biohazard sign
3dexport
biohazard sign
3ddd
$1
SUBWAY SIGN
...subway sign
3ddd
subway sign
3d_export
$5
road sign
...road sign
3dexport
road sign with the texture of a cyclist.
turbosquid
$45
Sign
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Sign
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
sign
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Clean
turbosquid
$29
Clean Bow
...osquid
royalty free 3d model clean bow for download as blend on turbosquid: 3d models for games, architecture, videos. (1257234)
turbosquid
$25
Jacuzzi Clean
...quid
royalty free 3d model jacuzzi clean for download as max on turbosquid: 3d models for games, architecture, videos. (1461249)
turbosquid
$32
Bobcat Clean
... free 3d model bobcat clean for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1393706)
turbosquid
$1
Zanbato - Clean
...ree 3d model zanbato - clean for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328531)
turbosquid
$10
Cleaning Products
...model cleaning products for download as ma, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1559247)
turbosquid
$25
cleaning kit
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Cleaning pads
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$16
Cleaning Bucket
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
cleaning bucket
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Cleaning robot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.