GrabCAD
Class I, Div II Bug Eyes Emergency Lighting System - Hazardous Locations - Exit Sign - 120/277V
by GrabCAD
Last crawled date: 1 year, 11 months ago
http://www.larsonelectronics.com/p-71212-class-i-div-ii-bug-eyes-emergency-lighting-system-hazardous-locations-exit-sign-120277v.aspx
Made in the USA
The HAL-EMG-EXT-12W-2L Hazardous Area Location Emergency Exit Light Bug Eyes with back up emergency battery from Larson Electronics is rated Class 1 Division II and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability is a must.
The HAL-EMG-EXT-12W-2L is an ideal solution for operators who wish to ensure their hazardous workspaces employ the most effective and reliable safety lighting options available. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for 90+ minutes or until power is restored. Once power is restored, a built in charger will return the unit to a fully charged state within acceptable UL time limits.
This hazardous area location emergency lighting fixture carries an integral maintenance-free, sealed, high temperature Nickel-Cadmium battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the LED bulbs for 90+ minutes. The battery is protected from deep discharge by solid state circuitry which senses low voltage and turns off the unit before battery damage can occur.
This emergency light is multi-voltage capable and can operate with voltages ranging from 120V to 277V @ 50/60HZ. This unit's housing and light fixtures are constructed of specially formulated fiberglass reinforced polyester with low surface resistivity that will not hold a static charge. The HAL-EMG-EXT-12W-2L can withstand temperature variances ranging from 0°C to +50°C and its low maintenance design offers up to ten years of operational life. An integrated pilot light indicates the presence of AC current and a test switch allows easy confirmation of proper emergency operation.
Made in the USA Quality
1. No Maintenance Nickel-Cadmium Battery.
2. Fiberglass Reinforced Polyester Construction.
3. Universal 120 through 277VAC Operation
4. 120 Minute Battery Backup Runtime.
5. Deep Discharge Battery Protection.
6. 10 Year Rated Lifespan.
7. Fully Automatic Operation.
8. Solid State Internal Electronics.
9. Pilot Light AC Current Indicator.
10. Test Switch for Emergency Operation Confirmation.
11. Fully Electronic Circuit Control.
Made in the USA
The HAL-EMG-EXT-12W-2L Hazardous Area Location Emergency Exit Light Bug Eyes with back up emergency battery from Larson Electronics is rated Class 1 Division II and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability is a must.
The HAL-EMG-EXT-12W-2L is an ideal solution for operators who wish to ensure their hazardous workspaces employ the most effective and reliable safety lighting options available. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for 90+ minutes or until power is restored. Once power is restored, a built in charger will return the unit to a fully charged state within acceptable UL time limits.
This hazardous area location emergency lighting fixture carries an integral maintenance-free, sealed, high temperature Nickel-Cadmium battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the LED bulbs for 90+ minutes. The battery is protected from deep discharge by solid state circuitry which senses low voltage and turns off the unit before battery damage can occur.
This emergency light is multi-voltage capable and can operate with voltages ranging from 120V to 277V @ 50/60HZ. This unit's housing and light fixtures are constructed of specially formulated fiberglass reinforced polyester with low surface resistivity that will not hold a static charge. The HAL-EMG-EXT-12W-2L can withstand temperature variances ranging from 0°C to +50°C and its low maintenance design offers up to ten years of operational life. An integrated pilot light indicates the presence of AC current and a test switch allows easy confirmation of proper emergency operation.
Made in the USA Quality
1. No Maintenance Nickel-Cadmium Battery.
2. Fiberglass Reinforced Polyester Construction.
3. Universal 120 through 277VAC Operation
4. 120 Minute Battery Backup Runtime.
5. Deep Discharge Battery Protection.
6. 10 Year Rated Lifespan.
7. Fully Automatic Operation.
8. Solid State Internal Electronics.
9. Pilot Light AC Current Indicator.
10. Test Switch for Emergency Operation Confirmation.
11. Fully Electronic Circuit Control.
Similar models
grabcad
free
Hazardous Location Emergency Exit Sign - C1D2 - Battery Backup - 120V/277VAC - Red or Green
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
Hazardous Location Emergency Exit Sign - C1D2 - Battery Backup - 120V/277VAC - Red or Green
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
Class I, Div. I & II Emergency Lighting System - 90 Minutes - Explosion Proof Bug Eyes - 120/277V
...grated pilot light indicates the presence of ac current and a test switch allows easy confirmation of proper emergency operation.
grabcad
free
Explosion Proof Exit Sign - Class I, Division I - IP65 - 120V/277VAC - Emergency Battery Back-Up
...tions making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
Hazardous Location Exit Sign - C1D2 - C2D1&2 - IP65 - 120V/277VAC - Green or Red Exit Sign
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
56 Watt Vapor Proof LED 4 Foot Light for Outdoor Applications - Emergency Battery Backup - Failsafe
...made in the usa the larson electronics gvp-emg-48-2l-led is similar to our popular explosion proof led fixtures and provides...
grabcad
free
84 Watt Vapor Proof LED 4 Foot Light for Outdoor Applications - Emergency Battery Backup - Failsafe
...made in the usa the larson electronics gvp-emg-48-3l-led is similar to our popular explosion proof led fixtures and provides...
grabcad
free
56W Vapor Proof LED 4 Foot Light for Outdoor Applications - Powers On ONLY During Power Outages
...larson electronics gvp-emg-48-2l-led-113 emergency only led light fixture is similar to our popular explosion proof led fixtures and provides...
grabcad
free
Explosion Proof Exit Sign - Class I, Division I - IP65 - 120V/277VAC - Green or Red Exit Sign
...rants making identification and location of exits in emergency situations easier than with typical self illuminated exit markers.
grabcad
free
84 Watt Vapor Proof LED 4 Foot Light for Outdoor Applications - Emergency Battery Backup - Failsafe
...made in the usa the larson electronics gvp-emg-48-3l-led is similar to our popular explosion proof led fixtures and provides...
Div
grabcad
free
DIVS
...divs
grabcad
diwali
grabcad
free
''/\/\/\/\/''..">>><div><image src=validateNonExistantImage.png onloadstart=alert(1337)> hey girl hey </div>
...t;
grabcad
"><div><image src=validatenonexistantimage.png onloadstart=alert(1337)> hey girl hey </div>
grabcad
free
U-Tube Tubesheet Integral with Shell and Channel - Div 2
...u-tube tubesheet integral with shell and channel - div 2
grabcad
1 u-tube tubesheet integral with shell and channel - div 2
grabcad
free
HY DIV 268N 5A DRİVER (SÜRÜCÜ)
...hy div 268n 5a dri̇ver (sürücü)
grabcad
stepper dri̇ver
grabcad
free
FSDC 2020 DIV-TMPP POLINEMA
...fsdc 2020 div-tmpp polinema
grabcad
polytechnic of malang student design results (indra pratama,m.ra`afiud afid)
grabcad
free
2nd Mar Div
... my unit's emblem on the coffee cup on my desk. i didn't spend to much time on it, just wanted a new desktop background.
grabcad
free
Pressure vessel 5m3_Horizontal ASME VIII div.1
...pressure vessel 5m3_horizontal asme viii div.1
grabcad
pressure 10 barg
temp 65deg
material p355nl
grabcad
free
Pressure vessel 5m3_Vertical ASME VIII div.1
...pressure vessel 5m3_vertical asme viii div.1
grabcad
pressure 10 barg
temp 65 deg
material p355nl
grabcad
free
KeyShot Toon Render: 2nd Mar Div
...ttp://grabcad.com/steven.richardson.
all materials are toon and i played around with some bump maps in the toon too.
semper fi!
grabcad
free
Radio unit Boeing 737 div cockpit
...it
grabcad
vhf radio panel for the boeing 737
the gears are with 22 teeth module 1
gear 1 with 6 mm shaft
gear 2 with 8 mm shaft
277V
grabcad
free
10 Watt LED Bulb - G24 Base - 24 LEDs - 675 Lumens - Non Dimmable - 120-277V - LED24LED-CFL26
... - 675 lumens - non dimmable - 120-277v
standard led replacement bulb for 26 watt compact fluorescent bulb with 4 pin (g24) base
grabcad
free
208-277 Volt Day/Night Sensor for 208Y, 220V, 240V and 277V AC lights up to 1000 Watts
...ot;-14 threaded (fits 1/2" knockouts), adjustable swivel arm
dimensions:
height: 4-18"
width: 2.4"
depth: 4"
grabcad
free
Philips Led 200 w
...philips led 200 w grabcad modelo: bvp091 led 200/cw 120-277v 200w...
grabcad
free
Safesite LED Area light - Atex
...atex grabcad zone 1 atex led light 110 - 277v ac 50/60hz 6000 lumens...
grabcad
free
20 Watt LED Bulb - G24 Base - LED Bollard - 1800 Lumens - Non Dimmable - 120-277V - Rotating Pins
...on, upgrading (from cfls to leds), background lighting, general area lighting, residential lighting, landscape lighting and more.
grabcad
free
20 Watt LED PAR38 Spot / Flood Light - IP67 Outdoor Rated - 2200 Lumens - 120-277V AC
...te technology, the vibration (dropping, etc.) that degrades conventional incandescent bulbs is not an issue with these led bulbs.
grabcad
free
Explosion Proof Low Profile Linear LED Light - C1D1 - 120-277V AC 50/60 Hz - Pendant/Ceiling Mount
...s: chemical processing, flammable work sites, oil and gas facilities, food processing plants, manufacturing, warehouses and more.
grabcad
free
Explosion Proof Low Profile Linear LED Light - C1D1 - 120-277V AC 50/60 Hz - Surface Mount
...s: chemical processing, flammable work sites, oil and gas facilities, food processing plants, manufacturing, warehouses and more.
grabcad
free
18 Watt LED Fixture for Industrial Lighting - Aluminum Housing - 120-277V - 3000K - IP65 Waterproof
.... this light is ideal for indoor or outdoor applications and industrial operations where wet conditions are commonly encountered.
Bug
grabcad
free
BUGS
...bugs
grabcad
bugs
grabcad
free
bug
...bug
grabcad
.
..
grabcad
free
bugs
...bugs
grabcad
learning
grabcad
free
Bug Zapper
...bug zapper
grabcad
bug zapper
grabcad
free
robot bug
...robot bug
grabcad
robot bug
grabcad
free
Bugs Bunny
...bugs bunny
grabcad
bugs bunny 3d
grabcad
free
spying bug
...spying bug
grabcad
spying bug in sw and rendered in keyshot luxion pro 4.0
grabcad
free
Bug Catcher
...bug catcher
grabcad
preliminary design of 8020 parts (and two other parts) for the bug catcher.
grabcad
free
Bug Coccinelle Design
...bug coccinelle design
grabcad
bug
grabcad
free
Arduino Bug
...arduino bug
grabcad
a simple arduino bug.
using arduino uno, 2 fs100 servos and a hc-sr04
Exit
grabcad
free
Exit Sign
...exit sign
grabcad
simple exit sign.
grabcad
free
Exit Sign
...exit sign
grabcad
scale model of exit sign
grabcad
free
Exit Signage
...exit signage
grabcad
exit sign - pointing at door below
grabcad
free
Exit Box Sign
...exit box sign
grabcad
exit sign
grabcad
free
Emergency lamp Exit
...emergency lamp exit
grabcad
emergency lamp exit
grabcad
free
Fire Exit Stair
...fire exit stair
grabcad
steel stair and balustrade for a fire exit
grabcad
free
exit door!
...exit door!
grabcad
unlimited catia
grabcad
free
exit signage
...exit signage
grabcad
custom signage
grabcad
free
Exit Safety Door
...exit safety door
grabcad
fire exit door. safety step, concept design
grabcad
free
exit opening
...exit opening
grabcad
used to reduce the output value
Hazardous
grabcad
free
hazard symbols
...hazard symbols
grabcad
hazard symbols 3d model
grabcad
free
HAZARD TAPE
...hazard tape
grabcad
adhesive hazard tape rs7967357
grabcad
free
Electrical hazard sign
...electrical hazard sign
grabcad
electrical hazard sign
grabcad
free
Barrels of hazardous waste
...barrels of hazardous waste
grabcad
barrels of hazardous waste
grabcad
free
Hazardous waste container
...hazardous waste container
grabcad
hazardous waste container
grabcad
free
Health hazard pictogram
...health hazard pictogram
grabcad
it is a health hazard pictogram
grabcad
free
Hazard Mtls. Whse.
...hazard mtls. whse. grabcad construction of a warehouse for hazardous ...
grabcad
free
Electrical hazard sign
...electrical hazard sign
grabcad
electrical hazard sign sticker
grabcad
free
chain entanglement hazard
...chain entanglement hazard
grabcad
hazard vinyl, safety tag
grabcad
free
B hazard
...b hazard
grabcad
symbol...
Emergency
grabcad
free
emergency staircase
...emergency staircase
grabcad
emergency staircase
grabcad
free
emergency watch
...emergency watch
grabcad
emergency watch
grabcad
free
Emergency Bag
...emergency bag
grabcad
emergency bag
grabcad
free
EMERGENCY STOP
...emergency stop
grabcad
emergency stop
grabcad
free
Emergency shower
...emergency shower
grabcad
emergency shower
grabcad
free
EMERGENCY SHOWER
...emergency shower
grabcad
emergency shower
grabcad
free
emergency stairs
...emergency stairs
grabcad
emergency stairs
grabcad
free
Emergency Stop
...emergency stop
grabcad
emergency stop
grabcad
free
EMERGENCY STOP
...emergency stop
grabcad
emergency stop
grabcad
free
Emergency Robot
...emergency robot
grabcad
emergency robot
Sign
grabcad
free
Sign
...sign
grabcad
sign
grabcad
free
Sign
...sign
grabcad
sign
grabcad
free
sign
...sign
grabcad
mouse sign
grabcad
free
Signs
...signs
grabcad
just signs
grabcad
free
Sign
...sign
grabcad
kind of sign, got in mind...
grabcad
free
Sign
...sign
grabcad
outdoor corporate monument sign
grabcad
free
Sign
...sign
grabcad
a sign i made for my grandpa
grabcad
free
sign
...sign
grabcad
dogs must keep owners on a leash sign
grabcad
free
3D sign
...3d sign
grabcad
this is 3d sign a infinity sign
grabcad
free
Sign - LED
...sign - led
grabcad
sign
120
grabcad
free
Model 120
...model 120
grabcad
120
grabcad
free
120
...120
grabcad
120.3
grabcad
free
EXERCISE 120
...exercise 120
grabcad
exercise 120
grabcad
free
Fan 120
...fan 120
grabcad
fan 120
grabcad
free
120 positions
...120 positions
grabcad
120 positions
grabcad
free
EC 120
...ec 120
grabcad
ec 120
grabcad
free
Part 120
...part 120
grabcad
part 120.
grabcad
free
Gearbox 120
...gearbox 120
grabcad
gearbox 120 hollow shaft i=34.6
grabcad
free
COOLING FAN 120 X 120
...cooling fan 120 x 120
grabcad
electrical distribution box cooling fan
grabcad
free
Fan 120 x 120 x 38
...fan 120 x 120 x 38
grabcad
small fan
Eyes
grabcad
free
eye
...eye
grabcad
eye
grabcad
free
eyes
...eyes
grabcad
eyes
grabcad
free
Eye
...eye
grabcad
its is an eye for 3d printing
grabcad
free
eye
...eye
grabcad
just a first test of making an eye
grabcad
free
Eye
...eye
grabcad
simple sci-fi eye model
grabcad
free
Ey
...ey
grabcad
joint
grabcad
free
Human Eye
...human eye
grabcad
eye
grabcad
free
Eyes-1103
...eyes-1103
grabcad
eyes
grabcad
free
Human Eye
...human eye
grabcad
human eye
grabcad
free
EYE BOLT
...eye bolt
grabcad
eye bolt
Ii
grabcad
free
ii
...ii
grabcad
ii
grabcad
free
Morsa II / Vise II
...morsa ii / vise ii
grabcad
morsa ii / vise ii
grabcad
free
TOBOGGAN II
...toboggan ii
grabcad
toboggan ii
grabcad
free
BOILER II
...boiler ii
grabcad
boiler ii
grabcad
free
LEXAN II
...lexan ii
grabcad
lexan ii
grabcad
free
CORKSCREW II
...corkscrew ii
grabcad
corkscrew ii
grabcad
free
AeroQuad II
...aeroquad ii
grabcad
aeroquad ii
grabcad
free
Xprinter-II
...xprinter-ii
grabcad
xprinter-ii
grabcad
free
Seikima II
...seikima ii
grabcad
seikima ii
grabcad
free
TSOP54-II
...tsop54-ii
grabcad
package tsop54-ii
Locations
grabcad
free
cross locator
...cross locator
grabcad
locator design used to locate the parts.
grabcad
free
Locator
...locator
grabcad
jig welding mechanism sample
grabcad
free
Locating Pin
...locating pin
grabcad
fixture locator
grabcad
free
Ice Location
...ice location
grabcad
ice location
grabcad
free
locating poust
...locating poust
grabcad
locating poust
grabcad
free
Locating Stand
...locating stand
grabcad
locating stand
grabcad
free
Locating Block
...locating block
grabcad
locating block
grabcad
free
Locating Block
...locating block
grabcad
locating block
grabcad
free
Locator
...locator
grabcad
parametric modeling with autodesk inventor 2012, chapter 3
grabcad
free
locating block
...locating block
grabcad
a creo modeled part of a locating block
Class
grabcad
free
Class
...class
grabcad
class
grabcad
free
Class
...class
grabcad
class memories
grabcad
free
Class
...class
grabcad
physical barrier in a class room promoting social distancing.
grabcad
free
for class
...for class
grabcad
das
grabcad
free
for class
...for class
grabcad
lego
grabcad
free
Meko class
...meko class
grabcad
meko class frigate
barbaros class frigate
most of the parts are moveable
grabcad
free
For Class
...for class
grabcad
pneumatic wheel
grabcad
free
Class 5
...class 5
grabcad
class 5
grabcad
free
Class Room
...class room
grabcad
class room
grabcad
free
class chair
...class chair
grabcad
class chair
Lighting
grabcad
free
Light
...light
grabcad
light
grabcad
free
LIGHT
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
grabcad
free
light
...light
grabcad
light
grabcad
free
Light
...light
grabcad
light
System
grabcad
free
system
...system
grabcad
system
grabcad
free
System
...system
grabcad
test system
grabcad
free
system
...system
grabcad
..
grabcad
free
Solar system
...solar system
grabcad
this is a new solar system without internal mechanical system. is a petented system.
grabcad
free
Solar System
...solar system
grabcad
this is a new solar system without internal mechanical system. is a petented system
grabcad
free
Amortiguador System
...amortiguador system
grabcad
amortiguador system and system parts.
grabcad
free
System
...system
grabcad
c
grabcad
free
System
...system
grabcad
work
grabcad
free
Roller System
...roller system
grabcad
roller system product file and system parts.
grabcad
free
System
...system
grabcad
my job