Cisco Webex Room Kit Series Stands by jarda_kp

Last crawled date: 3 years ago

[update 2021-04-17]
Tripod mounts for RKmini added. For Cullman bracket and for a screw. The screw version may be fragile. Use some strong material like PETG and test the mount before using it.
[update 2020-08-28]
Check my camera privacy covers for Room70/55 and Webex Board: https://www.thingiverse.com/thing:4581924
[update 2019-11-02]
Foldable stand for RKmini v5. Previous version was "proximity (wireless presentation) only" - it blocked the HDMI input port (sorry for that). V5 is simplified and doesn't block the port.
[update 2019-10-08]
Foldable stand for RKmini added. It can be packed in the RKmini box, so it's easier to transport. Functionality ruled design.
Cisco Webex Room devices are provided with wall and VESA mount options. Room Kit Plus device with wall mount only. No legs for desk or top of display placement are available. I tried to fill the gap and created the legs for both types of devices. Room Kit's camera is tilted and the original wall mount bar has two sides - one for above display and the other for below display placement. The below display side is tilted by 15 degrees. So I have created two versions of legs - "above" which is straight and "below" tilted by 15 degrees. Room Kit Plus's camera looks straight and can be adjusted by up to 15 degrees. For below display placement "15deg" stand is available. The Room Kit Mini stand is tilted by 7 degrees.
If you want to create your own legs, the "click" mechanisms are included in separate files so you can place them on top of your creation. Remember the legs should be at least 50mm high for proper cable management - all cable connectors point straight downward from the Room Kits. Do not forget the Room Kit weighs 3.2 kg and Room Kit Plus 4.8 kg and the legs should be stiff in front-back direction to avoid vibrations.
Room Kit recommended print position is on side, supports required. Room Kit Mini stand should be printed with supports, some support sections can be removed (see the screenshot from Slic3r).