Thingiverse
Chiron Dual Y-Axis Stepper Bracket
by Thingiverse
Last crawled date: 5 years, 3 months ago
Pictured is the V5 version, which is thicker, however may require higher clearance provided by the linear rails to work. V6 on the other hand has been modified to allow for that clearance, and is a safe bet for a stock Y carriage setup with rollers. Report back on its functionality.
Requirements:
2x M3 Pan-Head Allen Bolts
2x M3 T-nuts / Boat nuts
2x M4 Allen Bolts
2x M4 T-nuts / Boat nuts
Nema 17 stepper (I'm using the one from the extruder as I've switched to a pancake stepper there).
16T 10mm wide 5mm bore pulleys: https://www.amazon.com/gp/product/B07BH26P2D
Remix, and report back with any issues. I have the two Y steppers connected in parallel on my stock board with TMC2208 steppers and stock OS, running slightly higher voltage to feed both (1v).
Requirements:
2x M3 Pan-Head Allen Bolts
2x M3 T-nuts / Boat nuts
2x M4 Allen Bolts
2x M4 T-nuts / Boat nuts
Nema 17 stepper (I'm using the one from the extruder as I've switched to a pancake stepper there).
16T 10mm wide 5mm bore pulleys: https://www.amazon.com/gp/product/B07BH26P2D
Remix, and report back with any issues. I have the two Y steppers connected in parallel on my stock board with TMC2208 steppers and stock OS, running slightly higher voltage to feed both (1v).