Thingiverse
Cherry Profile Keycaps for Cherry MX by surfacelogan
by Thingiverse
Last crawled date: 4 years, 6 months ago
UPDATE 1/11/2021: Added R2-R4 keycaps, both with and without supports. These are currently only available in a 1u size, but I am working on the spacebar as well as some of the standard sizes for shift, backspace, caps-lock, backslash, etc. Look forward to those being uploaded in the next few days.
UPDATE 1/10/2021: Added R1 1u keycap in the cherry profile. Also corrected a few of the dimensions that were slightly off compared to the reference keycap set that I am using. For example, the draft angle was lowered from 9.605 deg. to 9 deg. Even though the height isn't reading as what cherry says is the standard, it matches up better with the other keys on my board. Also, the internal concavity was made to be slightly less aggressive, this provides a more accurate profile imo.
UPDATE 1/9/2021: The name of this project has been changed to represent my future intentions with it. Cherry Profile 1.5u Keycap -> Cherry Profile Keycaps for Cherry MX. I will be uploading R1-R4 in the standard sizes that may appear in those locations. This will be an ongoing project due to the tweaking that is needed to get an exact match on these keys. Following the completion of this, I will begin simultaneously modeling other popular profiles, such as DSA, and uploading keys with embossed legends and custom designs.
This is a blank 1.5u keycap meant to mount to an mx-style stem and match a cherry profile keycap set. You can print as is or modify it before printing. I did also include a pre-supported model if you decide not to make any modifications.
UPDATE 1/10/2021: Added R1 1u keycap in the cherry profile. Also corrected a few of the dimensions that were slightly off compared to the reference keycap set that I am using. For example, the draft angle was lowered from 9.605 deg. to 9 deg. Even though the height isn't reading as what cherry says is the standard, it matches up better with the other keys on my board. Also, the internal concavity was made to be slightly less aggressive, this provides a more accurate profile imo.
UPDATE 1/9/2021: The name of this project has been changed to represent my future intentions with it. Cherry Profile 1.5u Keycap -> Cherry Profile Keycaps for Cherry MX. I will be uploading R1-R4 in the standard sizes that may appear in those locations. This will be an ongoing project due to the tweaking that is needed to get an exact match on these keys. Following the completion of this, I will begin simultaneously modeling other popular profiles, such as DSA, and uploading keys with embossed legends and custom designs.
This is a blank 1.5u keycap meant to mount to an mx-style stem and match a cherry profile keycap set. You can print as is or modify it before printing. I did also include a pre-supported model if you decide not to make any modifications.