Thingiverse
Checkmate A1500 Plus Gotek Panel
by Thingiverse
Last crawled date: 5 years, 9 months ago
A Checkmate A1500 Plus Front panel for Gotek to match existing panels
The switch is if you want to use the DF 0/1 select which is built into the A500++ board.
Printed at 0.2mm
Support Required for the panel, i would print in Model orientation
X/Y distance at 3mm
Z distance at 0.3
No Roof or Floor
Makes it a bit easier to remove
OLED used 0.96" 128x64
The switch is if you want to use the DF 0/1 select which is built into the A500++ board.
Printed at 0.2mm
Support Required for the panel, i would print in Model orientation
X/Y distance at 3mm
Z distance at 0.3
No Roof or Floor
Makes it a bit easier to remove
OLED used 0.96" 128x64