Thingiverse
Chainmail 10x10
by Thingiverse
Last crawled date: 5 years, 6 months ago
My "Better chainmail" remix here : https://www.thingiverse.com/thing:4128035
Chainmail Remix by FLOWALISTIK.
I wanted to print a smaller size but a bigger one than the sample so I made 10 x 10.
I printed it on low settings in cura and it took about 2,5 hours.
Make sure to have the bed properly leveled. I had a problem with that and some part kept failing to stick. In the end only one in the corner failed so I left it.
Settings:
First layer: 0.24
Layer Height: 0.28
Infill: 0%
No supports
Chainmail Remix by FLOWALISTIK.
I wanted to print a smaller size but a bigger one than the sample so I made 10 x 10.
I printed it on low settings in cura and it took about 2,5 hours.
Make sure to have the bed properly leveled. I had a problem with that and some part kept failing to stick. In the end only one in the corner failed so I left it.
Settings:
First layer: 0.24
Layer Height: 0.28
Infill: 0%
No supports