Cetus3D MKII Universal Z-Axis Stabilizer by Kenzoo86

Last crawled date: 4 years ago

It is best to first print the object in the test version (worst quality with the smallest infill). Then check that everything fits and print the object in target quality with at least 65% infill. Mine is (99% infill, 0.15 layer height and normal quality settings with raft and supports) - (9 hours and 58g fillament). Pictures are made from first version but files are from upgraded version :-)
You will need also:
4x hex screw M3 x 18mm (or better 4x M3x17mm)
1x hex screw M3 x 25mm
1x self-locking nut M3
3x T-nut M3 2020 aluprofile (10mm version) (https://www.thingiverse.com/thing:1073567)